72.5kv High Voltage AIS & GIS Mobile transformer substation
The vehicle-mounted mobile substation consists of incoming HV switchgear system, main transformer, outgoing LV switchgear system and semitrailer etc. The cushion is provided between the equipment on vehicle and inside LV switchgear compartment and the trailer, so as to improve the transport reliability. Soft feeder is used for connection between equipment in order to avoid the damage of equipment resulting from deformation of compartment during travel. The period needed from arrangement to operation after the mobile substation reaches site is less than 180 minutes.
Other supplier products
|
|
KYN61-40.5kv Metal clad Movable MV Switch panel |
The enclosure is assembled after bending the aluminum-zinc steel-sheet which connected via high-strength bolts and riveting nuts, with panel spray ... |
|
|
66-550kv YJLW02 longitudinal water-proof XLPE power cable |
1 Standard 1) Conductive core(800mm2 and the below is tightening circle, the above is cutting structure) 2) The shielding layer of the conduct... |
|
|
outdoor single column, single arm, vertically shrinkable, HV AC Disconnector isolator |
GW22A single-post vertical extend-retract outdoor three-phase high-voltage AC disconnector,rated frequency 50Hz, rated voltage 126kV, 252kV, and 36... |
|
|
TKHVERT High voltage Transducer system with high accuracy, speed, high efficiency and saving energy |
TKHVERT high-voltage transducer consists of phase shifting transformer, the power unit, control unit. It is high - high - voltage source model con... |
|
|
LV Drawout Cabinet with rated operation voltage up to 660V and rated current upto 6300A |
The cabinet is applied for AC 50/60Hz distribution system with rated operation voltage up to 660V and rated current up to 6300A, as distribution, c... |
All supplier products
Same products
