ACREL AHKC-EKB (200-1000A)/5V OPEN-LOOP HALL EFFECT TRANSDUCER (SPLIT-CORE)
ACREL AHKC-EKB (200-1000A)/5V OPEN-LOOP HALL EFFECT TRANSDUCER (SPLIT-CORE)
AHKC-EKB hall split core current sensorcan collect main incoming line current, multi-channel branch DC current and leakage current. The split core hall effect current sensorconverts the primary side DC current into an analog signal and outputs it to the multi-loop monitoring device. The multi-loop monitoring device samples the analog signal and calculates the magnitude of the measured current.
Specification of AHKC-EKB (200-1000A)/5V OPEN-LOOP HALL EFFECT TRANSDUCER (SPLIT-CORE)
|
Parameter |
Description&Value |
|
Rated Input |
0～±(50-1000)A DC or 0~(50~1000)A AC |
|
Rated Output |
±5Vdc/±4Vdc |
|
Accuracy |
Class 1.0 |
|
Power Supply |
±15Vdc (allow ±20% fluctuation%) |
|
Consumption |
≤0.5W |
|
Zero Offset Voltage |
±20mV |
|
Offset Voltage Drift |
≤±1.0mV/℃ |
|
Linearity |
≤0.2%FS |
|
Response Time |
≤5us |
|
Bandwidth |
0~20kHz |
|
Isolation Voltage |
Features of AHKC-EKB (200-1000A)/5V Open-loop Hall Effect Transducer (Split-core)
01
It can measure DC, AC, pulse and various irregular waveform currents under electrical isolation conditions;
02
It is widely used in current monitoring and battery applications, inverter power supply and solar power management systems, DC panels and DC motor drives, electroplating, welding applications, inverters, UPS servo control and other system current signal acquisition and feedback control;
03
It has the advantages of fast response time, wide current measurement range and high precision, strong overload capacity, good linearity, and strong anti-interference ability.
Now the price of open loop hall effect current sensoris reasonable, if you are interested, please leave us a message.
As a power meter manufacturer, we will do our best to meet all the needs of customers.
Send product request
Other supplier products
 |
ACREL AHKC-EKA OPEN-LOOP HALL EFFECT TRANSDUCER (SPLIT-CORE) | ACREL AHKC-EKA OPEN-LOOP HALL EFFECT TRANSDUCER (SPLIT-CORE) AHKC-EKA series open-type Hall current sensor is a new generation of current sensor d... |
 |
ACR10R-D SERIES PV/SOLAR INVERTER ENERGY METER | ACR10R-D Series PV/Solar Inverter Energy Meter is divided into single-phase and three-phase. It is equipped with 485 MODBUS-RTU protocol as standar... |
 |
ACREL ACR10R-D16TE PV INVERTER METER WITH POWER MONITORING | ACR10R-D16TE PV inverter meter with power monitoring is suitable for energy-saving renovation projects in high-energy-consuming industries such as ... |
 |
ACREL AMC72-DV DC VOLT METER | ACREL AMC72-DV DC VOLT METER AMC72-DV small dc voltmeteris often used in DC motor drive circuits, battery charging circuits, battery testing, etc.... |
 |
ACREL ACLP10-24 AUXILIARY POWER SUPPLY | ACLP10-24 is a dedicated DC voltage regulator module for instruments, which uses a completely isolated linear transformer. It has the characteristi... |
Same products
 |
Hall Sensors | Seller: Acrel Co.,Ltd. | Hall Sensors Hall sensor is suitable for uninterruptible power supply (UPS), switching power s... |
 |
ADL3000-E | Seller: Acrel Co.,Ltd. | ADL 3000-E Acrel ADL 3000-E three-phase din rail multifunction 0.5s KWh energy meter with RS485.... |
 |
ADL200 | Seller: Acrel Co.,Ltd. | ADL200 ADL200 single phase electric meter is designed for single phase active energy measurement... |
 |
ADL10-E | Seller: Acrel Co.,Ltd. | ADL10-E ADL Series Energy Management Din Rail Kwh Meter. Acrel strictly controls and manages a... |
 |
Split Core Current Transformer | Seller: Acrel Co.,Ltd. | Split Core Current Transformer The appearance is nice and the installation and wiring are conv... |
