.

Latch Type Hall Sensor AH3041

Latch Type Hall Sensor AH3041

Features about our Linear Hall Sensor

Rated working voltage 4.5 V ~ 24 V, the limit voltages as low as 3.5 V;

Operating temperature range: -55℃ ~ 150℃;

Rated output current(sink) : 25 mA, the maximum output current(sink): 50 mA;

Switch response time is about 1μs, the operating frequency DC ~ 100 kHz;

Small temperature drift between operating point and release point;

No mechanical contact, no spark, switch signal stability, no shaking moment, high reliability and safety;

Products meet the EU RoHS instruction 2011/65 / EU and REACH regulations 1907/2006 / EU requirements.

Hall sensor AH3041is one of bipolar excitation single-ended digital output Hall IC. The output signal owns latch function. The sensor chip has built-in reverse voltage protection, voltage regulators, temperature compensation circuit, Hall-voltage generator, signal amplifier, Schmitt trigger and open collector output driver circuit unit etc. Excellent voltage regulator and temperature compensation circuit ensure the sensor stable operates over a wide voltage range and temperature range, and the reverse voltage protection circuit avoids the sensor to be damaged by reverse voltage.


Send product request

To: Nanjing AH Electronic Science & Technology Co., Ltd
Your E-mail:
Message text:


Send to other suppliers

Other supplier products

Micropower Omnipolar Hall Sensor AH3661
Micropower Omnipolar Hall Sensor AH3661 Hall Sensor Hall Switch Features Micropower designing; Rated supply voltage 2.4 V ~ 5.5 V; Omnipolar operating, no “N” or “S...
Latch type Hall Sensor AH513
Latch type Hall Sensor AH513 Latch type Hall Sensor AH513 Featuresof our Hall Sensor Rated working voltage 4.5 V ~ 24 V, the limit voltages as low as 3.5 V; Operating temperatu...
Unipolar Type Hall Sensor AH3133
Unipolar Type Hall Sensor AH3133 Hall Sensor Hall Switch Features Rated working voltage 4.5 V ~ 24 V, the limit voltages as low as 3.5 V; Operating temperature range: -40℃ ~ 15...
Micropower Omnipolar Hall Sensor AH3663
Micropower Omnipolar Hall Sensor AH3663 Micropower Omnipolar Hall SensorAH3663 Hall Sensor Hall Switch Features Micropower designing; Rated supply voltage 2.4 V ~ 5.5 V; Omnipolar o...
Linear Hall Sensor AH496B
Linear Hall Sensor AH496B Hall Sensor Hall Switch Features Rated working voltage 4.5 V ~ 10 V;, Operating temperature range: -40℃ ~ 125℃; Rail to Rail voltage output, ...
All supplier products

Same products

China made Vibration sensorHD-ST-A3-B3 for power plant
China made Vibration sensorHD-ST-A3-B3 for power plant Seller: DONGFANG YOYIK (DEYANG) ENGNIEERING CO; LTD "China made Vibration sensorHD-ST-A3-B3 for power plant is an exclusive product for power units o...
GE FANUC  PLC Module  IC693MDL340
GE FANUC PLC Module IC693MDL340 Seller: 840499 The IC693MDL340 is a 120 volt, 0.5 Amp AC Output Module of the Series 90-30 manufactured by GE Fa...
China Manufacturer Axial seal DLD320-20X2 for steam turbine
China Manufacturer Axial seal DLD320-20X2 for steam turbine Seller: DONGFANG YOYIK (DEYANG) ENGNIEERING CO; LTD China Manufacturer Axial seal DLD320-20X2 for steam turbine Selection of advanced technology, abs...
DGW25E-Rear Drive Motor-MTB
DGW25E-Rear Drive Motor-MTB Seller: Suzhou Shengyi Motor Co., Ltd Shengyi powerful DGW25E motor is strong enough to ride on rough mountain trail, which offers stab...
DGW07-R16 Ebike Brushless Motor
DGW07-R16 Ebike Brushless Motor Seller: Suzhou Shengyi Motor Co., Ltd Except for the different sizes of these motors, they are all high speed brushless wheel motors th...