.

Linear Hall Sensor AH3509

AH3509

◆ Features

Rated working voltage 4.5 V ~ 6 V,

Operating temperature range: -40℃ ~ 125℃;

Rail to Rail voltage output, Rated output current : 6 mA,

Variety of package forms and outer packings for your choice.

No mechanical contact, no spark, switch signal stability, no shaking moment, high reliability and safety;

Products meet the EU RoHS instruction 2011/65 / EU and REACH regulations 1907/2006 / EU requirements

◆ Outline

The sensor will pass linear area /nonlinear area/ saturation area during the magnetic induction increases. When there is no magnetic field that applies in sensor (B=0), when the output voltage of sensor is only half of Vcc (Vcc/2); when “N” pole faces mark surface of sensor, and be closed to it gradualy (B→-∞),the output voltage begins to decrease, and the voltage doesn’t reduce with the increased magnetic field; When the “S” pole of magnet faces the mark surface of the sensor and is closed to sensor gradualy (B→+∞), the output voltage of sensor begins to increase, and it doesn’t increase with the increased magnetic field after it reaches saturation voltage.

More information please view:


Send product request

To: Nanjing AH Electronic Science & Technology Co., Ltd.
Your E-mail:
Message text:


Send to other suppliers

Other supplier products

Signal-Type Wiegand Sensor WG112
Signal-Type Wiegand Sensor WG112 WG112 Features No need the power supply when it works. Bipolar excitation working mode, the sensor outputs a pair of positive and negative e...
Latch Type Hall Sensor AH512
Latch Type Hall Sensor AH512 Featuresof our Rated working voltage 4.5 V ~ 24 V, the limit voltages as low as 3.5 V; Operating temperature range: -55℃ ~ 150℃; Rated output cur...
Latch Type Hall Sensor AH4158
Latch Type Hall Sensor AH4158 Latch Type Hall Sensor AH4158 Hall Sensor Hall Switch Features Rated working voltage 4.5 V ~ 24 V, the limit voltages as low as 3.5 V; Operating te...
Latch Type Hall Sensor AH3041N
Latch Type Hall Sensor AH3041N Latch Type Hall SensorAH3041N Hall Sensor Hall Switch Features Rated working voltage 4.5 V ~ 24 V, the limit voltages as low as 3.5 V; Operating te...
Hall Effect Current Sensor
Hall Effect Current Sensor AH3663 AH3663is anOmnipolar micro-power high sensitivity special designed circuit make it owns omnipolar(regardless S pole or N pole) magnetic fie...
All supplier products

Same products

 LVDT Displacement Sensors LVDT-150-6 for thermal power plant
LVDT Displacement Sensors LVDT-150-6 for thermal power plant Seller: DONGFANG YOYIK (DEYANG) ENGNIEERING CO; LTD "Made in China LVDT Displacement Sensors LVDT-150-6 for thermal power plant Is YOYIK for the use ...
honeycomb filter
honeycomb filter Seller: Xuhaifa Filter Co., Ltd. honeycomb filter Honeycomb Filter Featuring a unique , these filters provide high surface...
China made Vibration sensorHD-ST-A3-B3 for power plant
China made Vibration sensorHD-ST-A3-B3 for power plant Seller: DONGFANG YOYIK (DEYANG) ENGNIEERING CO; LTD "China made Vibration sensorHD-ST-A3-B3 for power plant is an exclusive product for power units o...
GE FANUC  PLC Module  IC693MDL340
GE FANUC PLC Module IC693MDL340 Seller: 840499 The IC693MDL340 is a 120 volt, 0.5 Amp AC Output Module of the Series 90-30 manufactured by GE Fa...
China Manufacturer Axial seal DLD320-20X2 for steam turbine
China Manufacturer Axial seal DLD320-20X2 for steam turbine Seller: DONGFANG YOYIK (DEYANG) ENGNIEERING CO; LTD China Manufacturer Axial seal DLD320-20X2 for steam turbine Selection of advanced technology, abs...