Linear Hall effect sensors
will pass linear area /nonlinear area/ saturation area during the magnetic induction increases. When there is no magnetic field that applies in sensor (B=0), when the output voltage of sensor is only half of Vcc (Vcc/2); when “N” pole faces mark surface of sensor, and be closed to it gradualy (B→-∞）,the output voltage begins to decrease, and the voltage doesn’t reduce with the increased magnetic field; When the “S” pole of magnet faces the mark surface of the sensor and is closed to sensor gradualy （B→+∞）, the output voltage of sensor begins to increase, and it doesn’t increase with the increased magnetic field after it reaches saturation voltage.The magnetic and electric transfer characteristic curve of linear sensor is shown as the figure:
Features
Rated working voltage 4.5 V ~ 6 V;
Operating temperature range: -40℃ ~ 125℃;
Rail to Rail voltage output, Rated output current : 6 mA;
Variety of package forms and outer packings for your choice;
No mechanical contact, no spark, switch signal stability, no shaking moment, high reliability and safety;
Products meet the EU RoHS instruction 2011/65 / EU and REACH regulations 1907/2006 / EU requirements.
Send product request
Other supplier products
 |
Micropower Omnipolar Hall Sensor AH3661 | Micropower Omnipolar Hall SensorAH3661 Hall Sensor Hall Switch Features Micropower designing; Rated supply voltage 2.4 V ~ 5.5 V; Omnipolar operati... |
 |
AH3144 Unipolar Type Hall Sensor | AH3144 Features Rated working voltage 4.5 V ~ 24 V, the limit voltages as low as 3.5 V; Operating temperature range: -40℃ ~ 150℃; Rated output cu... |
 |
Unipolar Type Hall Sensor AH3134 | Unipolar Type Hall SensorAH3134 Hall Sensor Hall Switch Features Rated working voltage 4.5 V ~ 24 V, the limit voltages as low as 3.5 V; Operating ... |
 |
AH3144 Hall Sensor | Outline When the “S” pole of magnet faces the mark surface of the sensor and is closed to sensor （B≥Bop），the sensor outputs low lev... |
 |
Latch Type Hall Sensor AH3041N | Latch Type Hall SensorAH3041N Hall Sensor Hall Switch Features Rated working voltage 4.5 V ~ 24 V, the limit voltages as low as 3.5 V; Operating te... |
Same products
 |
LVDT Displacement Sensors LVDT-150-6 for thermal power plant | Seller: DONGFANG YOYIK (DEYANG) ENGNIEERING CO; LTD | "Made in China LVDT Displacement Sensors LVDT-150-6 for thermal power plant Is YOYIK for the use ... |
 |
honeycomb filter | Seller: Xuhaifa Filter Co., Ltd. | honeycomb filter Honeycomb Filter Featuring a unique , these filters provide high surface... |
 |
China made Vibration sensorHD-ST-A3-B3 for power plant | Seller: DONGFANG YOYIK (DEYANG) ENGNIEERING CO; LTD | "China made Vibration sensorHD-ST-A3-B3 for power plant is an exclusive product for power units o... |
 |
GE FANUC PLC Module IC693MDL340 | Seller: 840499 | The IC693MDL340 is a 120 volt, 0.5 Amp AC Output Module of the Series 90-30 manufactured by GE Fa... |
 |
China Manufacturer Axial seal DLD320-20X2 for steam turbine | Seller: DONGFANG YOYIK (DEYANG) ENGNIEERING CO; LTD | China Manufacturer Axial seal DLD320-20X2 for steam turbine Selection of advanced technology, abs... |
