Spray booth HC920
Specification（European design）Outside size:（mm） 7110 x 5800x 3810（L x W x H） Inside size：（mm） 7000 x 4000 x 2800（L x W x H）
Foundation and floor Foundation Adopt galvanized bending forming, more durable and strong. Full grid, the grids are suppressive type of steel grating instead of traditional twisted steel for the cross bar steel grating. The biggest features for it are beautiful, durable and better force bearing.
Surface area of foundation 27 M²（full galvanized grids）
Metal basement 350mm height，the ventilation effect is better than traditional spray booth.
Drive-in ramps 3 big drive-in ramps + 2 side ramps, has multi-angle drive-in function, each size: 2000x1030mm, diamond plate structure.
Wall and door Wallboard and roof panel High quality double construction fireproof insulation rock wool, thickness: 50mm
3-folded entrance door with safety glass window 1set, size: 3200x2700 mm(B x H), tempering glass observation window , size is bigger and view is better than traditional spray booth.
Operator’s door with safety glass window 800x2000mm（B x H）the top of service door installs door closer to close the door automatically
Spray gun hanging system Install hanging arm in cabin, convenient for operators to hang spray gun, etc.Lighting Ceiling lighting 8units，each 4 x 58 W，total 1856w , adopt Germany OSRAM Lamp, grade of lighting box’s dustproof and waterproof reach IP54 grade.
Side lighting 8units，each 2 x 58 W，total 928w, adopt Germany OSRAM Lamp, grade of lighting box’s dustproof and waterproof reach to IP54 grade.
Brightness ≥ 1500 LUXFiltration system
Pre-filters EU3 grade pocket filter, filter effect is much better
Ceiling filter EU5 grade high efficient filter
Bottom filter and exhaust filter Fibreglass paint-stop filters, G2 grade
Ventilation system Inlet fan （Direct drive motor） Adopt big impeller turbo fan，Germany SIEMENS Brand motor, 11KW，6-pole motor, 970RMP, 380V，50HZ
Outlet fan（Direct drive motor） Adopt big impeller turbo fan，Germany SIEMENS Brand motor, 11KW，6-pole motor, 970RMP, 380V，50HZ
Painting and baking exchange system Solenoid valve+ pressure adjustment control cylinder driven damper exchange
Total fan capacity 32.000m³/h
Air flow speed in empty booth 0.30m/s , inverter control
Heating system Heating exchanger material Adopt high efficient heat-resistant stainless steel as cycling heat exchanger
Heating exchanger capacity 320KW(340.000Kcal/H)
Burner model Adopt Italy REILLO two range diesel burner RL34-2（340.000kcal/H），quicker heating and much better effect, more rest assure for quality
Heating time 2-4 minutes( from 20°C to 60°C) under baking status, the max baking temperature is 80°C
Energy-saving system Model E-32000 When warm painting, the energy-saving system can collect exhaust air’s energy to heat the cold fresh air, then through second heating by furnace, the temperature of air in cabin will be increased quicker, more energy-saving, more environmental
Control system Control system Inverter control system
PLC controller Yes, PLC control, more reliable, lower breakdown rate
Human-computer interface touching screen control system Yes, touching screen control, easier to operate
Ceiling and floor filter change reminder function Ceiling filter and floor filter install differentiate pressure transmitter, when the ceiling and floor filter suck dust and paints to certain level, the control system will remind user to change filter humanely.
Inverter control Inverter control , more energy-saving, more economic
Function Painting, warm painting, baking, leveling, emergency stop switch, inverter, pressure adjust balance, failure indication, over-temperature alarm indication, baking delay stop protection
Other supplier products
|
|
Spray booth HC660 |
Specification (European Design)
Outside Size:(mm) 7110 x 5800x 3810（L x W x H） Inside Size:(mm) 7000 x 4000 x 2800（L x W x H）
Foundation and Floo... |
|
|
Spray booth HC610 |
Specification（European design）
Outside Size:（mm） 7010 x 5570 x 3610 mm （L x W x H） Inside Size：（mm） 6900 x 4000 x 2800 mm （L x W x H）
Foundation ... |
|
|
Spray booth HC900 |
Specification（European design）
Outside size： 7010 x 5570 x 3810 mm （L x W x H） Inside size： 6900 x 4000 x 2800 mm （L x W x H）
Foundation and floor... |
|
|
Spray booth HC920 |
Specification（European design）
Outside size:（mm） 7110 x 5800x 3810（L x W x H） Inside size：（mm） 7000 x 4000 x 2800（L x W x H）
Foundation and floor ... |
|
|
Spray booth HC630 |
Specification（European design）
Outside Size:（mm） 7010 x 5570 x 3810 mm （L x W x H） Inside Size（mm） 6900 x 4000 x 2800 mm （L x W x H）
Foundation an... |
All supplier products
Same products
