Dywer Series PE & TE Orifice Plate Flowmeters
Welcome to purchase discount source dywer series pe & te orifice plate flowmeters from our company, which is one of the best China dywer series pe & te orifice plate flowmeters manufacturers and suppliers.The Series PE Orifice Plate Flowmeter offers one-piece PVC construction incorporating a unique holder or carrier ring containing metering taps and integral gaskets. Unlike a standard orifice plate, the Series PE is a true primary element including the various components for differential pressure measurement. It was designed for use wherever there is an application for a conventional flow orifice plate. It can also be used in place of other primary differential producers for efficiency and cost effectiveness. The Series PE is available in line sizes from 1/2" to 24" and used for air and most gases. It meets or exceeds ASME, AGA & ISO standards.The Series TE Orifice Plate Flowmeter offers one-piece PTFE construction similar to the OP and PE Series orifice plates, which incorporate a unique holder or carrier ring containing metering taps and integral gaskets. Available for line sizes from 1/2" to 24", the Series TE orifice plate can be used with gases, liquids, corrosive, and high temperature fluids. The Series TE can be easily installed by slipping the unit between standard flanges (orifice flanges are not required). The Series TE was designed for use anywhere there is an application for a conventional flow orifice plate. It can also be used in place of other primary differential producers for efficiency and cost effectiveness.Product Applications• Fluid flow rates in building water lines• Boiler feedwater• Cooling water• Combustion or compressed air• Steam flowSpecificationsService: PE: Clean air and compatible gases; TE: Compatible gases and liquids.Wetted Material:Monolithic (single piece) constructed entirely of gray PVC for PE or white PTPE for TE, Buna-N gaskets.Accuracy:±0.6% full scale flow. (Beta= .2-.6) ±0.7% for Beta greater than .6.Temperature Limits: PE: 140°F (60°C) max; TE: -40 to 200°F (-40 to 93.3°C).Pressure Limits:150 psi (10 bar) maxHead Loss:1 - Beta ratio², eg: 1 - 07² = 1 - 0.49 = 51% of the d.p.Line Sizes: 1/2" to 24".Process Connections: 1/4" female NPT.Installation:Standard flange 125#/150# rating.Pipe Requirements:General requirements 10 diameter upstream and 5 diameter downstream.Weight:Varies with line size. See Catalog page.
Other supplier products
|
|
High Speed Linear Actuator |
Welcome to purchase discount source high speed linear actuator from our company, which is one of the best China high speed linear actuator manufact... |
|
|
Angle Seat Valve |
Welcome to purchase discount source angle seat valve from our company, which is one of the best China angle seat valve manufacturers and suppliers.... |
|
|
Series CLT Continuous Level Transmitter |
Welcome to purchase discount source series clt continuous level transmitter from our company, which is one of the best China series clt continuous ... |
|
|
Series 2000VA/3000WA Hi-Flow™ Control Valve |
Welcome to purchase discount source series 2000va/3000wa hi-flow™ control valve from our company, which is one of the best China series 2000va/3000... |
|
|
Diaphragm Control Valve |
Welcome to purchase discount source diaphragm control valve from our company, which is one of the best China diaphragm control valve manufacturers ... |
All supplier products
Same products
