FKM Powder
FKM PowderPolymer Processing Additives (PPA)FKM powder is one kind of Fluoroelastomer with shape of powder; it could be used as polymer processing additive of engineering plastic like HDPE, LLDPE and PP, in order to improve processing performance.1. CharacteristicMain PropertiesSpecificationAppearanceWhite granulesParticle size(μm)600 - 1000Fluorine content (wt %)66Specific gravity(g/cm3)1.75 - 1.78Moisture content (≤%)0.3Tensile strength(mPa)13.1ApplicationProcessing aid for blow membrane, cast film; sheet and pipe extrusion; wire and cable, jacket extrusion.Processing guideIt is suggested that firstly make master batch through extruder with Powder FKM content 2%-3%, then mix with polymer for processing at certain ratio.2. Package、storage and transportation:(1). FKM powder is packed in paper drum with 25kg net weight per drum.(2). It should bestored in clean, dry place with temperature below 30℃.
Other supplier products
|
|
PVDF Molding Grade |
PVDF Molding Grade FTH-213 Characteristic Physical properties Specification ASTM Test standard MFR(g/10min)1~10ASTM D1238, 2300C/12.5kgAppear... |
|
|
PVDF Injection Molding Grade |
PVDF Injection Grade FTH-211 Characteristic Physical properties Specification ASTM Test standard FTH-211A FTH-211B FTH-211C MFR(g/10min)10~1515... |
|
|
Mixed Refrigerants R407c |
R407CR407C is a colorless gas under ordinary temperature, and a colorless & transparent liquid under the pressure of itself,mixed by R32, R134aand ... |
|
|
Refrigerant R22 In 13.6kg Disposable Cylinder For Air Conditioner |
R22R22 is a colorless gas under ordinary temperature and a colorless & transparent liquid under the pressure of itself,Website:, Vnon-toxic & infla... |
|
|
PTFE Medium-size Particle Resin |
PTFE medium-size particle resinMain Technical PropertiesFT-G90AppearanceWhite powder, no impuritiesTensile strength, Mpa≥25.5Elongation at break, %... |
All supplier products
Same products