Air To Air Heat Pipe Heat Exchanger
General Information
Heat pipe structure
A. composed by a shell and the working fluid,shell is evacuated and the working fluid is sealed in the shell.
B. The heat pipe is divided into the evaporator section (Heated) and condenser section (cooled).
Heat transfer principle
Heat pipe heat exchanger consists of six consecutive process:
A. Endothermic--the working fluid is heated by exhaust gas in the evaporator section。
B. Evaporation—The working fluid evaporates. (in the shell , vacuum, Low evaporation temperature)
C. Gaseous working fluid conveyor---The working fluid flow to condenser section with the waste heat.
D. Condensing--Gaseous working fluid is condensed when it exposes to low temperature shell wall.
E. Exothermic-- The working fluid releases a lot of heat when it is condensed and
the heat is taken away by the cold fluid.
F. The working fluid reflux-- after condensed, the working fluid is back to the evaporator section by gravity or capillary pumping forces.
/product/heat-pipe-heat-exchanger
The six consecutive process carried out consecutively, and the heat is continuous to transfer.
Mechanical seal
A. seal by thread lock.
B. seal by O-ring.
Field of Application
-feed drying
-cereals and oil processing
-chemical industry
-air cooling after combustion process
Specification
Advantage:
-high heat recovery efficiency
-seldom temperature difference, fast heat starting, good isothermal
-the speciality of the heat pipe results in a high wall temperature, exhaust gas temperature can be reduced without reaching the acid dew point, avoid the corrosion of the equipment.
-exhaust gas will not pollute air
Core tube material: copper, stainless steel, carbon steel
Fin material: aluminum, stainless steel
Tube/fin bond: extruded, high-frequency welding
Tube arrangement: staggered
Core tube external diameter: φ25
Core tube wall thickness: 2-3mm
Fin thickness: 0.4mm
Fin spacing: 3mm
Temperature range: 20~150℃
Order Information
P/N Description: HP-XYZ-N
Note: X should be replaced into S, C or CO
Y should be replaced into S or A
Z should be replaced into ET, W
N means the power needed
S-stainless steel
C-carbon steel
CO-copper
A-aluminum
ET-extruded
W- high frequency welding
Send product request
Other supplier products
| Water/Liquid Air Heater Round Tube | General InformationWater/liquid coil air heater/air preheater mainly uses steel-aluminum tube, stainless steel tube and copper tube as the main ele... | |
| Steam Air Heater With Round Tube | General InformationFinned tube steam air heater/air preheater with round tube mainly uses steel-aluminum finned tube or stainless steel finned tube... | |
| Evaporative Cooler Copper | General InformationEvaporative cooler is also called evaporator, uses the liquid refrigerant, which is easy to evaporate under low pressure and con... | |
| Water/Fluid Cooler Copper | General Information Water/liquid cooler is used to cool the air using the chilled water/liquid in the core tube. The chilled water brings the absor... | |
| Air Cooler With Elliptical Tube | General InformationFin fan air cooler is the heat exchanger which use nature air to cool hot water or fluid. Hot fluid inside the pipe exchanges he... |
Same products
| Lithopone Powder | Seller: Langfang Pairs Horses Chemical Co.,Ltd | Lithopone Powder Lithopone B301 and B311 are premiumwhite pigmentsderived from the co-precipit... | |
| Water Filter | Seller: O&K GROUP LIMITED | Looking for Quality Products? From electronics to home essentials, fashion to industrial supplies... | |
| Internet Set-Top Box | Seller: O&K GROUP LIMITED | Looking for Quality Products? From electronics to home essentials, fashion to industrial supplies... | |
| High Purity GBL Liquid (Gamma-Butyrolactone) 99.9% | Seller: 871344 | Whatsapp : +40 767 772 668 Signal : Townrunner.01 Buy High Purity GBL Liquid (Gamma-Butyrol... | |
| Sawn Wood Panel | Seller: Anhui Soft Stone Master New Material Co.,Ltd | Sawn Wood Panelis a soft stone surface inspired by raw sawn timber, featuring visible saw-cut tex... |













