PTFE Micro Powder
PTFE Micro PowderPTFE micro powder is the micron-sized PTFE white powder which has low molecular weight range 10000~30000. It can be used as an addictive to mix the materials with plastics and elastomers. The use of PTFE micro powder can reduce the friction coefficient of lubricant oils and greases, and extent the life time of lubricants. It could also be used as a release agent to disperse in organic solvents.PTFE micro powder could also be used in electrostatic coating process to prepare anti-corrosive coating.Main Technical Properties PropertiesIndexWhiteness (% ≥)95Average Particle Size (μm)3~12Specific Surface Area (m2/g)0.8-3Moisture Content (% ≤)0.03Relative Density (g/ cm3)2.10-2.40Bulk Density (g/l)225-600Melting Point (°C)325 ± 5Main Application:(1) Electrostatic coating.(2) It can be added to the resin as additive, such as PA, POM, PBT, PC/ABS, HIPS.(3) It can improve wear resistance and prevent scratching the material surface. It can increase the slipping property and reduce friction, noise and adhesive ability between the materials.(4) It can also be used for painting, lubricant oil, and paraffin to enhance scratch resistance and rub resistance etc.Packing, Storage and Transportation:• λ Packed with sealed PVC bag, load in Water content proof paper barrel. The net weight is 20kg per barrel.• λ Not classified as hazardous for transport. During transportation and storage, avoid heavy shaking, and prevent from heating.• λ Stock in clean, cool and dry warehouse, prevent from agglomeration and contamination.
Other supplier products
|
PTFE Dispersion |
PTFE DispersionMain Technical PropertiesFT-4DC-AFT-4DC-DAppearanceWhite liquidWhite liquidPTFE content %60±260±2Surfactant %4.0-7.04.0-7.0PH8月10日8月... |
|
Refrigerant R1234yf To Replace Refrigerant R134a |
HFO-1234yf is a hydrofluoroolefin with the formula CH2=CFCF3. It has been proposed as a replacement for R134a as a refrigerant in automobile air co... |
|
PVDF Molding Grade |
PVDF Molding Grade FTH-213 Characteristic Physical properties Specification ASTM Test standard MFR(g/10min)1~10ASTM D1238, 2300C/12.5kgAppear... |
|
PTFE Free Flow |
PTFE Free Flow (Pelletized) ResinMain Technical PropertiesFT-4A2FT-4A3AppearanceWhite powder, no impuritiesTensile strength, Mpa ≥22.522.5Elongatio... |
|
Foaming Agent R141B |
Dichlofluoroethane(R141b)R141b (HCFC-141b) is the leading substitute blowing agent for CFC-11 in rigid foam insulation materials which are widely u... |
All supplier products
Same products