T8100 Controller chassis P8100
T8100, T8100C, P8100
T8100 Controller chassis
Description
The Trusted controller chassis is designed to accommodate a maximum of eight single-width Trusted interfaces and up to two triple-width Trusted TMR processors.
The chassis consists of a backplane, power connection terminals, and the inter-module bus connectors. The chassis is 6U (10.5ins) high and is either front mounted in a 483mm (19- inch) fixed frame or swing frame, or can be panel (rear) mounted in a suitable electrical enclosure.
The two slot positions on the left (as viewed from the front) are for installing the Trusted TMR processors. The eight remaining slots are for installing the Trusted interfaces. Each module plugs into the chassis backplane, connecting to the triplicated inter-module bus. Double and single connector options are available.
The backplane is part of the Trusted controller chassis and provides electrical interconnection and other services for the modules. A triplicated 4-position DIP switch is provided for user configuration of the system identification.
Power connection to the Trusted controller chassis is provided via a 4-pole connector on the chassis backplane. The Trusted controller chassis is designed for a nominal dual +24V dc power supply.
Features
2 x 90mm Trusted TMR processor slots.
8 x 30mm Trusted interface module slots.
No user-serviceable parts.
Fast assembly.
Minimum tooling/parts.
Twelve high integrity I/O modules supported per Trusted expander chassis.
Dual redundant power supplies from the Trusted high integrity power supply unit.
Module slot keying.
Triplicated inter-module bus connections.
Front or rear (panel) mounting on 483mm (19-inch) dimension.
32, 48, 64 and 96-way DIN41612 I/O port connector capability.
Send product request
Other supplier products
 |
Power Shelf ICS Triplex T8240 Plantguard P8240 | T8240, T8240C, P8240 T8240 Power Shelf Features Redundant and n+1 configurations. Hot replaceable Power Packs. Current sharing. Current limiting. P... |
 |
T8312-7 Expander Interface Adaptor P8312-7 | Description The Trusted Expander Interface Adaptor Unit T8312 comprises seven 12-pin ODU connectors (dependent on type of unit), a printed circuit... |
 |
Processor ICS Triplex T8110B T8111C Plantguard P8110B | T8110B, T8111C, P8110B, ICS Triplex, Plantguard T8110B Processor Description Trusted TMR processor contains and executes the operating and appli... |
|
|
T8100 Controller chassis P8100 | T8100, T8100C, P8100 T8100 Controller chassis Description The Trusted controller chassis is designed to accommodate a maximum of eight single-wi... |
 |
Analogue input module ICS Triplex T8431 T8431C Plantguard P8431 | T8431, T8431C, P8431 T8431 Analogue input module Features 40 TMR input channels per module. Comprehensive diagnostics and self-test. 2500V dc opti... |
Same products
 |
CSD16301Q2 TRANSISTOR MOSFET N-CH 25V 6SON TEXAS INSTRUMENTS | Seller: ZK Electronic Technology Co., Limited | Part Number:CSD16301Q2 Description:CSD16301Q2 TRANSISTOR MOSFET N-CH 25V 6SON TEXAS INSTRUMENTS ... |
 |
CAPACITOR EEF-CX0J101R PANASONIC SMD SPEC POLYMER 100UF 6.3V SMD LF | Seller: ZK Electronic Technology Co., Limited | Part name:EEF-CX0J101R Description:CAPACITOR EEF-CX0J101R PANASONIC SMD SPEC POLYMER 100UF 6.3V ... |
 |
Heavy Copper PCB Manufacturer | Seller: Xinfeng Huihe Circuits Co., Ltd. | Heavy Copper PCB, pcb fabrication up to 12oz, large current, pcb circuitfabrication base material... |
 |
8 Layer ENIG Half Hole Custom PCB | Seller: Xinfeng Huihe Circuits Co., Ltd. | Number of layers: 8 Surface finish: ENIG Base material: FR4 Outer Layer W/S: 4/3mil Inner lay... |
 |
4 Layer ENIG Impedance Control Half Hole PCB Electric Circuit Board | Seller: Xinfeng Huihe Circuits Co., Ltd. | Number of layers: 4 Surface finish: ENIG Base material: FR4 Outer Layer W/S: 6/4mil Inner lay... |
