SAE EV Charging Socket
Mechanical Properties
Contact Pin: Copper alloy, silver or nickel plating
Sealing gasket: rubber or silicon rubber
Mechanical life: no-load plug>10000times
Impact of external force: be able to afford 1m drop and 2tons vehicle run over pressure
Insertion and extraction force:<100N
Electrical Performance
Rated current: 16A/32A/40A/50A
Rated voltage: 240V
Insulation resistance: >1000MΩ(DC500V)
Pins temperature:<50K
Withstand voltage: 2500V
Contact impedance: 0.5mΩMax
Environmental performance
Temperature: -30℃~+50℃
SAE j1772 socketFeatures
Conform to the provisions and requirements of SAE J1772 standard, It can applicable to all American standard electric vehicle charging guns.
Use copper alloy, silver plated surface Beautiful appearance,prevention cap can be installed on the left side, the right side or the front of it, sae j1772 plugconveniently.
XLPO for cable insulation prolonging the aging resistance life-span. TPU sheath improves the bending life and wear resistance of cable. The best material in the market at present.
Special internal waterproof protection performance, protection grade achieved IP55 (working condition). The shell can effectively insulate water from body and enhance the safety level even in bad weather or special circumstances.
Reliable material, flame retardant, pressure resistance, abrasion resistance, impact resistance and high oil resistance.
Application of SAE EV j1772 outlet
Apply to Vehicle
For Tesla model3, for Tesla Model S, for Tesla Model X, for BAIC EU-Series, for BYD Yuan/S2 EV, for BYD e5, for Chevrolet Volt, for Mia, for Mia Electric Van, for Mitsubishi OUTLANDER PHEV, for Nissan NV200 SE Van, for Nissan leaf, for SAIC Baojun E-Series, for SAIC Roewe Ei5 EV, for BMW 530e/Le, for Renault Zoe, for Hyundai Kona EV, for BMW i3, for BYD Tang PHEV, for Chery eQ EV, for Toyota Prius PHEV, for Volkswagen e-Golf, for Geely Emgrand EV, for Great Wall Ora R1 EV
Application in area
Commercial EV Charging/Workplace EV Charging, Hotels EV Charging, Home/Residential EV Charging, Public EV charging
SAE EV Charging Socket Parameter
AG ELECTRICAL EV Charging sockets acquires all safety and production certificates in electrical filed, ISO9001, ISO 14001, OHSAS 18001, SAE J1772-2012
|
Product Type |
EV Charging sockets |
|
Rated Current |
16A/32A/40A/50A |
|
Rated Voltage |
240V |
|
Phase |
One Phase/Single Phase, Three Phase |
|
Cable Specification（Wire length and the end of treatment according to the client configuration) |
H07BZ5-F3X2.5mm²+2x0.5mm² |
|
H07BZ5-F3X6mm²+2x0.5mm² |
|
|
H07BZ5-F5X2.5mm²+2x0.5mm² |
|
|
H07BZ5-F5X6mm²+2x0.5mm² |
|
|
Warranty |
12 months |
|
Certificate |
CE |
|
Packaging Details |
Standard export wooden case or carton. Or as customer requirements |
|
Delivery Time (days) |
Within 15 days, if quantity >100, to be negotiated |
With the help of experienced cable specialist from ONITL, AG ELECTRICAL has strong confidence on the EV charging Components from quality perspective, and become the famous ev charging equipment manufacturers. Powered by ONITL Cable Technology, who has been working in cable industry for decades, has become a great advantage of AG products. AG ELECTRICAL has deployed with Manufacturing Execution System(MES). It means we can handle different custom products from different customers at the same time. We can provide high quality EV Charging Cable connectors with highly recommendations from customers in the past few years.
Send product request
Other supplier products
 |
EV Charging Cable Type 2 | Mechanical Properties Mechanical life: no-load plug>10000times Impact resistance: be able to afford 1m drop and 2tons vehicle run over pressure I... |
 |
SAE J1772 EV Charging | "American Standard" refers to the SAE J1772 standard. SAEJ1772is just a general term. It includes four subdivision standards and three different ch... |
 |
TYPE2-TYPE1 Adaptor Charging Mode3 | Mechanical properties Mechanical life: no-load plug>10000times Impact of external force: can afford 1m drop and 2t vehicle run over pressure. ... |
 |
TYPE2 AC EV Charging Socket | Connection Mode Riveting Pressure mode Screw mode Mechanical Properties Mechanical life: no-load plug>10000 Insertion force:<100... |
 |
SAE EV Portable Charger TYPE 1 Mode 2 | EV Charging Portable Type1 Mode2 Features Mode 2 charger conforms to the provisions and requirements of SAE J1772-2012, it can charge all EV manufa... |
Same products
 |
Amorphous Alloy Type Transformer Iron Core | Seller: Shijiazhuang Tianya Electric Co., LTD | Amorphous Alloy Type Transformer Iron Core -The iron coreis made of high magnetic conductivity m... |
 |
10kv Dry Type Epoxy Resin Cast Power Transformer | Seller: Shijiazhuang Tianya Electric Co., LTD | 10kv Dry Type Epoxy Resin Cast Power Transformer Epoxy resin cast dry-type transformeris a high-... |
 |
HM B200/B210 Series | Seller: BEIJING HIGHMESH INFORMATION TECHNOLOGY CO.,LTD. | HM B200/B210 Series USRP B200/B210 Product Overview The B200 and B210 hardwarecovers RF frequen... |
 |
HM-B210（Single-Board） | Seller: BEIJING HIGHMESH INFORMATION TECHNOLOGY CO.,LTD. | HM-B210（Single-Board） Description TheB210is a highly integrated Universal Software Radio Periph... |
 |
Busbar systems | Seller: Jinan Dema Electric Co., Ltd. | Busbar systems Busbar Systems for Plant Reliable Industrial Power Distribution Solutions for Fa... |
