BACKUP BATTERY SUPPLY SYSTEM
Thelithium backup power supplyis also called an emergency power supply. It is a device that replaces the main power supply to supply power to the load when the main power supply fails to work normally in an emergency. According to the different power sources, it can be divided into battery type backup power and generator type backup power.
The battery type backup power supply unit components of chargers, inverters, batteries, dual power switch, etc., and the generator type backup power supply unit components of generator sets, isolation transformers, and dual power switch. Nowadays, the lithium ion backup poweris getting more popular.
Types of backup power supply
The rechargeable backup power supply is commonly used in industries, commerce, and fire protection. Nowadays, most people choose to use EPS backup power supply and UPS backup power supply:
EPS backup power supply
EPS backup power supply is composed of an inverter, rectifier, charger, battery, isolation transformer, controller, switch, and so on. EPS emergency power supply is suitable for inductive loads (such as gas discharge lamps, fluorescent lamps, motors) and resistive loads (such as incandescent lamps). Therefore, EPS is commonly used in fire fighting and other fields, and it is also a better battery rechargeable battery backup for home.
EPS rechargeable battery power supplyworking principle:
In non-emergency situations, the main power supply is in working condition, and the backup power supply charges the power supply battery through the charging device.
In an emergency, the dual power supply switch switches the load from the main power supply to the backup power supply in a very short time (with millisecond level).
At this time, the main power supply is off, and the backup power supply provides power to the load.
When the main power supply returns to normal, the dual power supply switch will instantly switch back to the main power supply.
UPS backup power supply
UPS backup power supply consists of a transformer, charger, storage battery, etc. UPS is only suitable for capacitive loads, so it is commonly used in computers and other fields and is often used as a rechargeable backup power supplyfor an office.
Working principle:
AC and DC backup power supply
The DC backup power supply has two electrodes, a positive electrode and a negative electrode. The positive electrode has a high electric potential and the negative electrode has a low electric potential. When the two electrodes are connected to the circuit, a constant potential difference between the two ends of the circuit can be maintained, thus, a current from positive to negative is formed in the external circuit.
The DC rechargeable backup power supply is mainly used in hydraulic and thermal power plants, various substations. The DC rechargeable backup power supply is mainly composed of battery packs, charging devices, DC feeder screens, DC distribution cabinets, DC power monitoring devices, DC branch feeders, etc. It forms a huge, distributed DC power supply network, providing safe and reliable backup power for various subsystems such as relay protection devices, circuit breakers, signal systems, UPS, communications, etc., so as to avoid their huge impact due to the power failure.
The AC rechargeable backup power supply adopts two AC power supplies. The AC input of the AC rechargeable backup power supply should are not in accordance with the regulations. The continuous fluctuation range of AC input voltage does not exceed 10%, and the harmonic content does not exceed relevant regulations. The AC rechargeable power supply should not be supplied by the same transformer and bus with other impulsive loads. The input and output loops of the AC rechargeablebackup power supply should adopt cables.
Industrial battery backup is available at Kijo, feel free to contact!
KIJO battery Group is a professionalstorage battery company, we provide motive power battery, ups power supply battery, best residential battery storage, home batteries for solar power, home batteries for solar storage, house energy storageand etc. Want to know more? Please contact us.
Send product request
Other supplier products
 |
HIGH RATE BATTERY | High Rate Discharge Battery High rate series batterygenerally refers to the lithium battery, which mainly relies on lithium ions' moving between th... |
 |
Hailong 36V Lithium Battery For Electric Bikes | Specification of 36 volt lithium ion battery for bikes Battery Model Rate Voltage（V） Rate Capacity（AH/10Hr) Dimension(mm)... |
 |
AGM BATTERY | The AGM battery refers to the absorbent glass mat battery or absorbed glass mat battery, whose design principle is to inject the required amount of... |
 |
25.2V Lithium ion Battery | KIJO as a storage battery manufacturermainly provides 25.2 v lithium batteryas well as power supply battery. Specification of 25.2V Lithium ion ... |
 |
48V Lithium ion Battery | Founded in 1993, KIJO batteryGroup is a professional storage battery manufacturerintegrating science, industry and trade. KIJO has a production cap... |
Same products
 |
CSD16301Q2 TRANSISTOR MOSFET N-CH 25V 6SON TEXAS INSTRUMENTS | Seller: ZK Electronic Technology Co., Limited | Part Number:CSD16301Q2 Description:CSD16301Q2 TRANSISTOR MOSFET N-CH 25V 6SON TEXAS INSTRUMENTS ... |
 |
CAPACITOR EEF-CX0J101R PANASONIC SMD SPEC POLYMER 100UF 6.3V SMD LF | Seller: ZK Electronic Technology Co., Limited | Part name:EEF-CX0J101R Description:CAPACITOR EEF-CX0J101R PANASONIC SMD SPEC POLYMER 100UF 6.3V ... |
 |
Heavy Copper PCB Manufacturer | Seller: Xinfeng Huihe Circuits Co., Ltd. | Heavy Copper PCB, pcb fabrication up to 12oz, large current, pcb circuitfabrication base material... |
 |
8 Layer ENIG Half Hole Custom PCB | Seller: Xinfeng Huihe Circuits Co., Ltd. | Number of layers: 8 Surface finish: ENIG Base material: FR4 Outer Layer W/S: 4/3mil Inner lay... |
 |
4 Layer ENIG Impedance Control Half Hole PCB Electric Circuit Board | Seller: Xinfeng Huihe Circuits Co., Ltd. | Number of layers: 4 Surface finish: ENIG Base material: FR4 Outer Layer W/S: 6/4mil Inner lay... |
