Fixed Phase Shift Matrix
HBTEFPM Series is a high performance fixed phase shifter, it is a test system intended to provide beamforming test capabilities to the coaxial network air interface in a system test environment, between RU and UE (simulator). They are compact and integrated in standard chassis. Covering frequency bands from 1.7 to 5Ghz. The fixed phase shifter can transfer the signal reciprocally from any of the inputs ports to any of other output ports, with high phase accuracy, amplitude balance, low insertion loss, and high port-to-port isolation.
With the features of broad working frequency range,compact design and construction and custom frequency ranges and configurations are available.
It is widely used in WiFi, WiMAX, 4G/5G LTE Testing, Link Simulation, MIMO Testing,Multipath Simulation and Performance Evaluation, Helical AntennaArray Beam-forming, Interferometer System Simulation and Testing, and other test scenarios.
Types of Fixed Phase Shift Module
FAQs of Fixed Phase Shift Matrix
What is phase shift?
Phase shifting works by taking the input signal and adding a very small amount of delay to it, and then mixing it back with the original (non-delayed) signal so that certain frequencies of the audio are in or out of phase with each other. The time delay is modulated so the delay amount changes with time.
Why is a phase shift important?
Because of the predominantly inductive character of the power system, an active power flow between source and load must be accomplished with a phase lag between the terminals. Phase-shifting transformers are a preferred tool to achieve this goal.
Can a phase shift be negative?
Sure, a negative phase shift indicates a movement to the right, and a positive phase shift indicates movement to the left.
Send product request
Other supplier products
 |
200W Coaxial Load | The coaxial loadis mainly used to absorb the power of the radio frequency or microwave system, and can be used as a dummy load of an outdoor antenn... |
 |
Automotive OTA Test System | The Internet of Vehicles is a promising development direction for the automotive industry in the next few decades. On-board applications such as se... |
 |
S Series Low Loss Stable Phase Cable Assembly | S Series Low Loss Stable Phase Cable Assembly HBTE covers DC-40G, S series low loss phase stable cableassembly has the characteristics of low loss... |
 |
Azimuth Positioner | HBTEazimuth positionerhas the characteristics of high precision and high sensitivity, which can rotate from 0 to 360 degrees. It can rotate the equ... |
 |
H Series Conventional Semi-Rigid Cable Assembly | HBTE provides Semi-rigid H series cables are not easy to be bent and formed, and they can maintain their shape for a long time after bending and fo... |
Same products
 |
CSD16301Q2 TRANSISTOR MOSFET N-CH 25V 6SON TEXAS INSTRUMENTS | Seller: ZK Electronic Technology Co., Limited | Part Number:CSD16301Q2 Description:CSD16301Q2 TRANSISTOR MOSFET N-CH 25V 6SON TEXAS INSTRUMENTS ... |
 |
CAPACITOR EEF-CX0J101R PANASONIC SMD SPEC POLYMER 100UF 6.3V SMD LF | Seller: ZK Electronic Technology Co., Limited | Part name:EEF-CX0J101R Description:CAPACITOR EEF-CX0J101R PANASONIC SMD SPEC POLYMER 100UF 6.3V ... |
 |
Heavy Copper PCB Manufacturer | Seller: Xinfeng Huihe Circuits Co., Ltd. | Heavy Copper PCB, pcb fabrication up to 12oz, large current, pcb circuitfabrication base material... |
 |
8 Layer ENIG Half Hole Custom PCB | Seller: Xinfeng Huihe Circuits Co., Ltd. | Number of layers: 8 Surface finish: ENIG Base material: FR4 Outer Layer W/S: 4/3mil Inner lay... |
 |
4 Layer ENIG Impedance Control Half Hole PCB Electric Circuit Board | Seller: Xinfeng Huihe Circuits Co., Ltd. | Number of layers: 4 Surface finish: ENIG Base material: FR4 Outer Layer W/S: 6/4mil Inner lay... |
