EV Charging Connector
The charging plug in another word is the charging interface of the electric vehicle. This EV charging connectoris classified into DC charging and AC charging interface according to the current and voltage. And the difference between AC charging connector and DC car charging connectoris shown below.
EV Charging Connector Types
AC Charging Connector
GB/T Charging Connector
IEC 62196-2 Charging Connector
SAE J1772 Charging Connector
AC Charging Connector
The usage of AC charging plug is to supply power to the vehicle charger with low-speed charging. The environment of use is usually at home, work places and destination.
DC Charging Pins and Connectors
DC GB/T Charging Connector
CCS IEC 62196-3 Combo 2 Charging Connector
CCS Combo 1 Sae J1772 DC Charging Connector
DC Charging Connector
DC charging plug is used to charge the battery with fast charging technology. The feature of DC charging plug is stable, high voltage, high current, and it comes with temperature protection device.
How does an EV Charging Connector Work？
Household AC slow charging is based on the current residential power supply system (using single-phase 220V or three-phase 480V) and uses a charger of 5-22kW power range. OBC will convert household AC to DC so as to charge the battery of the car.
Differences Between Type 1 And Type 2 EVConnectors
The difference in appearance is the number of jacks. The American standard AC is usually five holes, and the European standard is seven holes.
EV Charging Connector Advantages
Conform to the global regulation standard, to ensure the safety connection between charging plug and station.
Conform to the global regulation standard, to ensure the safety connection between charging plug and station.
Meet the ergonomic design, friendly to users
Apply rubber material with better friction.
We also have kinds of brass electrical pinsfor sale, if you have needs, please contact us.
Send product request
Other supplier products
 |
DC GB/T Charging Connector | GB/T Charging Connector is widely used in the DC charging system of electric vehicles and conforms to GB/T 20234.2 standard. It is compatible with ... |
 |
SAE J1772 Charging Connector | AP SAE J1772 combo AC EV charging plug conforms to sae j1772 plugprovisions and requirements. This charging connector boasts compatibility with a m... |
 |
Hyperboloid Contacts | The hyperboloid contactsspring terminal is the patented product specially developed and researched by AP team to match the high current connector o... |
 |
DC GB/T Charging Connector | GB T Charging Connectoris widely used in the DC charging system of electric vehicles and conforms to GB/T 20234.2 standard. It is compatible with m... |
 |
EV Charging Connector | The charging plug in another word is the charging interface of the electric vehicle. This car charging connectoris classified into DC charging and ... |
Same products
 |
CSD16301Q2 TRANSISTOR MOSFET N-CH 25V 6SON TEXAS INSTRUMENTS | Seller: ZK Electronic Technology Co., Limited | Part Number:CSD16301Q2 Description:CSD16301Q2 TRANSISTOR MOSFET N-CH 25V 6SON TEXAS INSTRUMENTS ... |
 |
CAPACITOR EEF-CX0J101R PANASONIC SMD SPEC POLYMER 100UF 6.3V SMD LF | Seller: ZK Electronic Technology Co., Limited | Part name:EEF-CX0J101R Description:CAPACITOR EEF-CX0J101R PANASONIC SMD SPEC POLYMER 100UF 6.3V ... |
 |
Heavy Copper PCB Manufacturer | Seller: Xinfeng Huihe Circuits Co., Ltd. | Heavy Copper PCB, pcb fabrication up to 12oz, large current, pcb circuitfabrication base material... |
 |
8 Layer ENIG Half Hole Custom PCB | Seller: Xinfeng Huihe Circuits Co., Ltd. | Number of layers: 8 Surface finish: ENIG Base material: FR4 Outer Layer W/S: 4/3mil Inner lay... |
 |
4 Layer ENIG Impedance Control Half Hole PCB Electric Circuit Board | Seller: Xinfeng Huihe Circuits Co., Ltd. | Number of layers: 4 Surface finish: ENIG Base material: FR4 Outer Layer W/S: 6/4mil Inner lay... |
