12V 120V ETL APPROVED 3000W INVERTER CHARGER
The Cosuper GMC3000 pro-line pure sine wave inverter charger is a perfect power solution with combination of battery inverter, battery charger and automatic transfer switch, which helps save space and simplify installation by reducing the amount of equipment and cables installed in mobile power systems. This unit is designed for easy use in RVs, trucks, fleet vehicles and conversion vans. Ideal for powering tools, saws, motors, pumps, portable lighting, appliances and computer equipment in heavy-load conditions.
Unique temperature-compensated charging design helps extend battery life by dynamically adjusting voltage based on ambient temperature. It ensures maximum charging in colder conditions while reducing the risk of overcharging the battery in warm conditions.
FEATURES OF 12V 120V ETL APPROVED 3000W INVERTER CHARGER
Approved by ETL standard
CAN-BUS+RS485 communication
Low THD ensure sensitive loads working stably
Provide CR80 RV control center, PTM-12 remote controller and CR70 Enginnering Mode Panel (optional)
Extra charging function for starter battery
Keep working continuously with full power output at -10~50℃
Ultra-low idle consumption could effectively save the energy
Auto GEN start/stop
Electronic protection against Over/under voltage, overload, overheating, short circuit
2 years warranty
TECHNICAL SPECIFICATIONS OF 12V 120VINVERTER CHARGER
|
Models |
GMC3000 |
|
Rated Power(-10-50℃) |
3000W |
|
DC Input |
|
|
Rated Voltage |
12VDC (10.5~15.5VDC) |
|
90A-house battery; 3A-start battery |
|
|
Battery Type |
AGM/Gel/Flooded/Lithium |
|
AC Input |
|
|
Output Voltage |
170-275VAC/93.5-126.5VAC |
|
Input Frequency |
45~65Hz |
|
AC Output |
|
|
Output Voltage |
230VAC±5%/120VAC±3% |
|
Oput Frequency |
50/60Hz±1% |
|
Wave Form |
Pure Sine Wave |
|
Transfer Time |
≤6ms |
|
Efficiency |
>90% |
|
Overload |
105-120% 10s/ >120% 3s/ >150% 1s |
|
3600W |
|
|
Protection |
DC over/low volt, AC input low/low volt, AC short circuit, over temp, overload |
|
Self-consumption |
10W |
|
Protection |
|
|
Dc Low-volt Alarm/Shutdown |
|
|
AC Low-volt Switch to DC |
|
|
Bypass To Invertering |
|
|
Battery Over-charge Shutdown |
|
|
General |
|
|
Working Temperature |
-10~50℃ |
|
Storage Temperature |
-20~50℃ |
|
Work/ Storage Humidity |
0-90% No condensation |
|
Dimension (W*D*H) |
500*259*190mm |
As a reliable inverter factory, we can offer kinds of inverter chinafor sale, anything you need, please leave us a message.
Send product request
Other supplier products
 |
150W CAR INVERTER | Our 150 watt car inverterprovides 150W continuous DC to AC cigarette lighter adapter and 300W instantaneous power with 1 AC outlet and 2 USB ports.... |
 |
1000W POWER INVERTER | The Cosuper SCH1000 pure sine wave inverter chinaconverts DC power (12V/24V/48V) to AC power (110V/120V/230V/240V), well suitable for mobile or per... |
 |
48V 230VAC 5000W SOLAR INVERTER CHARGER (500VOC) | The Cosuper SPE5000S solar inverter charger is a combination of solar charger, battery inverter and AC charger. This solar power inverter 5000walso... |
 |
300W DC TO AC INVERTER | 300W DC to AC invertercomes with 1 AC outlets provide with continuous 12V/24VDC to 100V/120V/230VAC power rated 300W (600W peak). The 300W DC to AC... |
 |
25.6V 120AH LITHIUM IRON PHOSPHATE BATTERY | Cooper's W-L series 25.6V lifepo4 120ah batteryis capable of providing a reliable, longer life and high power solution for 24V systems. The key fea... |
Same products
 |
CSD16301Q2 TRANSISTOR MOSFET N-CH 25V 6SON TEXAS INSTRUMENTS | Seller: ZK Electronic Technology Co., Limited | Part Number:CSD16301Q2 Description:CSD16301Q2 TRANSISTOR MOSFET N-CH 25V 6SON TEXAS INSTRUMENTS ... |
 |
CAPACITOR EEF-CX0J101R PANASONIC SMD SPEC POLYMER 100UF 6.3V SMD LF | Seller: ZK Electronic Technology Co., Limited | Part name:EEF-CX0J101R Description:CAPACITOR EEF-CX0J101R PANASONIC SMD SPEC POLYMER 100UF 6.3V ... |
 |
Heavy Copper PCB Manufacturer | Seller: Xinfeng Huihe Circuits Co., Ltd. | Heavy Copper PCB, pcb fabrication up to 12oz, large current, pcb circuitfabrication base material... |
 |
8 Layer ENIG Half Hole Custom PCB | Seller: Xinfeng Huihe Circuits Co., Ltd. | Number of layers: 8 Surface finish: ENIG Base material: FR4 Outer Layer W/S: 4/3mil Inner lay... |
 |
4 Layer ENIG Impedance Control Half Hole PCB Electric Circuit Board | Seller: Xinfeng Huihe Circuits Co., Ltd. | Number of layers: 4 Surface finish: ENIG Base material: FR4 Outer Layer W/S: 6/4mil Inner lay... |
