AUTO EXTRA D10 AUTOMATED SOLID PHASE EXTRACTION SYSTEM
Auto Extra D10 Automated solid-phase extraction system is an automated sample pre-treatment instrument specialized in handling water samples for detection and analysis of organic pollutants in water, to enrich and purify trace organic pollutants in large water samples. RayKolAuto Extra D10 automated solid phase extraction equipment combines solid phase extraction diskwith negative pressure sample loading to significantly improve the efficiency of solid-phase extraction and decrease sample preparation duration before water quality analysis. And effective rinsing function of this SPE systemto sample vials reduces the adsorption of target compounds on vials, to ensure accuracy and repeatability of analysis results.
AUTO EXTRA D10 AUTOMATED SOLID PHASE EXTRACTION EQUIPMENT FEATURES
Combination of solid phase extraction discsand cartridges
Maximum 10 units, can run different methods on each unit
Direct sample loading and filtration, as well as complex sample matrices
Negative pressure extraction
Precise and accurate solvent injection
Remote WIFI control solid phase extraction system
AUTO EXTRA D10 AUTOMATED SOLID PHASE EXTRACTION EQUIPMENT SPECIFICATIONS
Parameter |
Specification |
Extraction channel |
1 unit, maximum 10 units |
SPE disk size |
47mm, 50mm, 90mm |
SPE cartridge size |
6mL |
Sample volume |
20mL to 4L |
Flow rate of SPE disk |
≧100mL/min |
Solvent capacity |
8 |
Software interface |
Windows PC; WIFI connection |
Operating temperature |
10 to 40°C |
Operating humidity |
20 to 80% |
Power supply |
200 to 240V, 50/60Hz |
AUTO EXTRA D10 AUTOMATED SOLID PHASE EXTRACTION EQUIPMENT APPLICATIONS
Auto Extra D10 Automated Solid Phase Extraction System is ideal for large-volume water samples, mainly used to enrich trace compounds from water:
Pesticides
Antibiotics
PAHs
PCBs
SVOCs
Microcystins
TYPES OF ANALYSIS USING AUTO EXTRA D10 AUTOMATED SOLID PHASE EXTRACTION EQUIPMENT
Raykol automated solid phase extraction equipment is ideal for detection of 16 kinds of PAHs in water by solid phase disk extraction and GC-MS. Contact us for more information!
If you want to know more kinds of lab consumables, please visit our website.
Send product request
Other supplier products
FOTECTOR SERIES AUTOMATED SOLID PHASE EXTRACTION SYSTEMS | RayKol's Fotector series Automated Solid Phase Extraction Systems are automated SPE systems and purification equipments, designed to meet the requi... | |
SPE CARTRIDGES | RayCure SPE series provides high-quality SPE cartridgesfor various types of solid phase extraction, including manifold, vacuum as well as automated... | |
IMD SERIES MICROWAVE DIGESTION SYSTEM | RayKol IMD series Microwave digestion systemis a microwave digestion instrument applicable in laboratories and various environments. Efficient and ... | |
SPE CARTRIDGES | RayCure SPE series provides high-quality SPE cartridgesfor various types of solid phase extraction, including manifold, vacuum as well as automated... | |
AUTOMATED LAB EQUIPMENT | Automated laboratory equipmentis increasingly becoming in demand as laboratories require for higher throughput and automation. These lab automation... |
Same products
Heavy Copper PCB Manufacturer | Seller: Xinfeng Huihe Circuits Co., Ltd. | Heavy Copper PCB, pcb fabrication up to 12oz, large current, pcb circuitfabrication base material... | |
8 Layer ENIG Half Hole Custom PCB | Seller: Xinfeng Huihe Circuits Co., Ltd. | Number of layers: 8 Surface finish: ENIG Base material: FR4 Outer Layer W/S: 4/3mil Inner lay... | |
4 Layer ENIG Impedance Control Half Hole PCB Electric Circuit Board | Seller: Xinfeng Huihe Circuits Co., Ltd. | Number of layers: 4 Surface finish: ENIG Base material: FR4 Outer Layer W/S: 6/4mil Inner lay... | |
4 Layer ENIG Impedance Control Half Hole Fr4 PCB | Seller: Xinfeng Huihe Circuits Co., Ltd. | Number of layers: 4 Surface finish: ENIG Base material: FR4 Outer Layer W/S: 6/3.5mil Inner l... | |
2 Layer OSP Impedance Control Half Hole PCB | Seller: Xinfeng Huihe Circuits Co., Ltd. | Number of layers: 2 Surface finish: OSP Base material: FR4 Outer Layer W/S: 6/4mil Thickness:... |