ISOLATED POWER SYSTEMS
What Is Isolated Power System?
Acrel isolated power supply systems are mainly used in the medical and industrial sectors. The medical isolated power distribution systemis mainly designed for the large threat to the patient's life caused by the leakage current. The industrial isolated electrical systemis mainly used to monitor the insulation condition of the system to the ground in real-time because the leakage current poses a threat to the safety of some industrial production.
Isolated Power Supply Systems For Sale
An isolated power supply system is suitable for important places such as hospital operating rooms, ICU (CCU) intensive care units, and industrial fields such as electrolytic aluminium, mines, glass factories, electric furnaces and test equipment, metallurgical plants, chemical plants, explosion-hazardous places, computer centres and emergency In AC and DC ungrounded systems such as power supplies.
Isolated Power SystemDefinition
In an isolated power supply system, the AITR series medical isolation transformer is the core of the system. It is used with the AIM series insulation monitor to monitor the insulation status of the IT system to the ground. When an insulation fault occurs, the AID series alarm and display instrument will remotely display and Sound and light alarm, at the same time ASG test signal generator and AIL insulation fault locator will locate the location of the fault, to cut off the fault circuit in time and accurately.
Isolated vs. Non-Isolated Power Supply
Different risk of electric shock
01
The driving efficiency is different
02
The cost is different
03
How Does An Isolated Power Supply Work?
Isolated power systems, like our hospital isolated power systems, are known as power distribution systems with ungrounded neutral points. The power supply side of the system has no working grounding or is grounded through a high impedance, and grounding protection is performed on the load side. Therefore, when the first leakage fault occurs, the leakage current is small and will not generate a large contact voltage to threaten personal safety. Therefore, It is not necessary to cut off the power supply, so that the medical or industrial equipment can continue to work, and at the same time, the alarm device is used to remind the staff to check and eliminate the fault in time.
If you want to know more kinds of power quality measuring devices, please visit our website.
Send product request
Other supplier products
 |
ELECTRICAL MONITORING & PROTECTION DEVICE | Acrel electrical overload protection devicesprovide solutions for 0.4kv-35kv power distribution system, which include programmable panel energy met... |
 |
DATA CENTER MONITOR | Acrel based on customer needs, we integrate the characteristics of data center operation and maintenance, from the bottom monitoring of equipment t... |
 |
DATA CENTER MONITOR | Acrel based on customer needs, we integrate the characteristics of data center operation and maintenance, from the bottom monitoring of equipment t... |
 |
POWER SENSOR | Acrel power sensor is designed for industrial electrical measurement of low voltage system, include current transformer, hall effect current sensor... |
 |
DATA CENTER MONITOR | Multi-Circuit Monitoring Wireless Communication Terminal Acrel based on customer needs, we integrate the characteristics of data center opera... |
Same products
 |
Heavy Copper PCB Manufacturer | Seller: Xinfeng Huihe Circuits Co., Ltd. | Heavy Copper PCB, pcb fabrication up to 12oz, large current, pcb circuitfabrication base material... |
 |
8 Layer ENIG Half Hole Custom PCB | Seller: Xinfeng Huihe Circuits Co., Ltd. | Number of layers: 8 Surface finish: ENIG Base material: FR4 Outer Layer W/S: 4/3mil Inner lay... |
 |
4 Layer ENIG Impedance Control Half Hole PCB Electric Circuit Board | Seller: Xinfeng Huihe Circuits Co., Ltd. | Number of layers: 4 Surface finish: ENIG Base material: FR4 Outer Layer W/S: 6/4mil Inner lay... |
 |
4 Layer ENIG Impedance Control Half Hole Fr4 PCB | Seller: Xinfeng Huihe Circuits Co., Ltd. | Number of layers: 4 Surface finish: ENIG Base material: FR4 Outer Layer W/S: 6/3.5mil Inner l... |
 |
2 Layer OSP Impedance Control Half Hole PCB | Seller: Xinfeng Huihe Circuits Co., Ltd. | Number of layers: 2 Surface finish: OSP Base material: FR4 Outer Layer W/S: 6/4mil Thickness:... |
