.

BGO Scintillators

BGO scintillation crystalis one of the most common oxide scintillation materials. It exhibits stable physical and chemical properties, high mechanical strength, high density, high refractive index, and resistance to harsh environments. With its high stopping power, high scintillation efficiency, good energy resolution and non-hygroscopic, BGO is a good scintillation material for a wide range of applications in high energy physics, space physics, medicine, geological exploration and other industries.

OST Photonics can supply BGO crystals, BGO arrays and BGO scintillation detector upon request. We can offer a variety of design options and reflector materials to optimize array performance and ensure the array's high light output, excellent uniformity and minimal crosstalk.

Application of BGO Scintillators (Bismuth Germanate Scintillators)

Positron emission tomography (PET)

High-energy physics

Nuclear medicine

Geological exploration

Gamma-ray spectroscopy

Advantages of BGO Scintillators (Bismuth Germanate Scintillators)

High Z

Good photopeak to Compton ratio

The scintillator of choice for neutron activation analysis and active Compton shields

High density

The Ability of OST Photonics

Maximum Size: ɸ76mm x 300mm, 40mm x 80mm x 200mm

Available items: monolithic crystal, pixellated array, scintillation detector

Properties of BGO Scintillators (Bismuth Germanate Scintillators)

Density [g/cm3]

Melting point [K]

1323

Thermal expansion coefficient [C-1]

7 x 10-6

Cleavage plane

None

Hardness (Mohs)

5

Hygroscopic

No

The wavelength of emission max. [nm]

480

Refractive index @ emission max

Primary decay time [ns]

300

Light yield [photons/keVγ]

8-10

Photoelectron yield [% of NaI(Tl)] (for γ-rays)

15–20

Afterglow



Send product request

To: Jiaxing AOSITE Photonics Technology Co.,Ltd.
Your E-mail:
Message text:


Send to other suppliers

Other supplier products

α-BBO Crystals
α-BBO Crystals α-BBO (α-BaB2O4) is a negative uniaxial crystal which has large birefringence over a broad transparent range of 190nm to 3500nm. &alpha...
OST Photonics Al2O3 Crystals (Sapphire)
OST Photonics Al2O3 Crystals (Sapphire) OST PhotonicsAl2O3 Crystals (Sapphire) Al2O3 crystals (Sapphire), featuring broad optical transmission from 150-5500nm spanning from UV to MWIR sp...
BaTiO3 Substrates
BaTiO3 Substrates BaTiO3 single crystal has excellent photorefractive properties, high self-pumped phase conjugate reflectivity and two-wave mixing (optical amplific...
BGO Scintillators
BGO Scintillators BGO scintillation crystalis one of the most common oxide scintillation materials. It exhibits stable physical and chemical properties, high mechani...
BaF2 Scintillators
BaF2 Scintillators BaF2 barium fluoride crystal is the scintillation crystal with the fastest decay time found so far, it has a fast component with a scintillation de...
All supplier products

Same products

CSD16301Q2 TRANSISTOR MOSFET N-CH 25V 6SON TEXAS INSTRUMENTS
CSD16301Q2 TRANSISTOR MOSFET N-CH 25V 6SON TEXAS INSTRUMENTS Seller: ZK Electronic Technology Co., Limited Part Number:CSD16301Q2 Description:CSD16301Q2 TRANSISTOR MOSFET N-CH 25V 6SON TEXAS INSTRUMENTS ...
CAPACITOR EEF-CX0J101R PANASONIC SMD SPEC POLYMER 100UF 6.3V SMD LF
CAPACITOR EEF-CX0J101R PANASONIC SMD SPEC POLYMER 100UF 6.3V SMD LF Seller: ZK Electronic Technology Co., Limited Part name:EEF-CX0J101R Description:CAPACITOR EEF-CX0J101R PANASONIC SMD SPEC POLYMER 100UF 6.3V ...
Heavy Copper PCB Manufacturer
Heavy Copper PCB Manufacturer Seller: Xinfeng Huihe Circuits Co., Ltd. Heavy Copper PCB, pcb fabrication up to 12oz, large current, pcb circuitfabrication base material...
8 Layer ENIG Half Hole Custom PCB
8 Layer ENIG Half Hole Custom PCB Seller: Xinfeng Huihe Circuits Co., Ltd. Number of layers: 8 Surface finish: ENIG Base material: FR4 Outer Layer W/S: 4/3mil Inner lay...
4 Layer ENIG Impedance Control Half Hole PCB Electric Circuit Board
4 Layer ENIG Impedance Control Half Hole PCB Electric Circuit Board Seller: Xinfeng Huihe Circuits Co., Ltd. Number of layers: 4 Surface finish: ENIG Base material: FR4 Outer Layer W/S: 6/4mil Inner lay...