Explosion Proof High Bay Lighting
Products Show for Explosion Proof High Bay Lighting
High lumens efficiency high bay lighting, low bay lighting, pendant lighting for area lighting solutions
to meet requirements in hazardous locations
Explosion proof high bay light fixture, other names such as explosion proof area lighting, explosion proof pendant light, explosion proof drop light, explosion proof temporary lighting, explosion proof ceiling light, explosion proof recessed lighting, occupy more than 30% requests for the type of explosion proof lighting, besides, explosion proof led high baylights trend to replace at least 80% of explosion proof high bay lighting.
Designed with a bay shape widely for area lighting used in high ceiling and narrow areas with high lumens, explosion proof high bay lighting normally are structured with die cast aluminum flame proof housing and built-in led explosion lamp and driver to make it possible to be used as class 1 and class 2 light fittings whose hazard class division rates from class 1 div 1 to class 1 div 2, class 2 division 1 to class 2 division 2 hazardous locations, from Zone 1 to Zone 2 explosive atmosphere. SUREALL explosion proof led high bay lightingis the best lighting from oil and gas lighting to paint booth lighting and gas station lights and the main features is more flexible mounting accessories to install anywhere probably you have no space to install, such as pendant mounting, ceiling mounting, wall 30° mounting，wall straight mounting, stanchion 30° mounting ,stanchion straight mounting.
Category
Explosion Proof High Bay Lighting
Explosion Proof Led High Bay Lights Class 1 Div 1 Zone 1 SHB Series
Class I Division 1
Zone 1&2, Zone 21&22
LED 30-240W
Type 4X, IP66
Explosion Proof Led High Bay Lights Class 1 Div 2 Zone 2 SHB-II Series
Class I Division 2
Zone 2, Zone 21&22
LED 30-300W
Type 4X, IP66
Explosion Proof Led High Bay Lights Class 1 Div 1 Zone 1 SO-I Series
Class I Division 1
Zone 1&2, Zone 21&22
LED 30-150W
Type 4X, IP66
Explosion Proof Led High Bay Lights Class 1 Div 2 Zone 2 SVM Series
Class I Division 2
Zone 2, Zone 21&22
LED 30-300W
Type 4X, IP66
Explosion Proof Led High Bay Lights Class 1 Div 2 Zone 2 SVM Series
Features
Explosion Proof High Bay Lighting
Die cast aluminum flame proof or increased safety housing
Independent chamber for led driver, led lamp and connection
Optional flexible and convenient mounting accessories
High lumen output to lighting a high ceiling work place
Energy saving led lamp compared with traditional HID lamp
Wide voltage power input for different grid
Wide ambient temperature range from -40℃ - +55℃
IP66, IP67 ingress protection, NEMA 4X
Class 1 Div 1, Class 1 Div 2, Class 2 Division 1, Class 2 Division 1
Zone 1, Zone 2, Zone 21, Zone 22
Main Use
Explosion Proof High Bay Lighting
Explosion proof high bay lighting have diversified usages, in order to make you understand clearly, now we are listing the main usage fields from four aspects, hazard class division, usage by application, usage by physical place and alternative for brand-new models.
Hazard class division
You know there are different classifications and divisions for any explosion proof lighting, the same as explosion proof high baylighting, hazard class division can be class 1 div 1 and class div 2, class 2 division 1 and class 2 division 2, zone 1 and zone 2, zone 21 and zone 22, you can check the hazardous area classifications chart from other pages.
Usage by application
Depends on the application field, explosion proof high bay led lightcan be used in crude oil plant, refinery plant, LNG and LPG plant, petrochemical and chemical plant such as paint booth lighting plant, gas station lights plant, anywhere there is combustible gas, vapor, mist and dust.
Usage by mounting places
Explosion proof high bay ledcan be used in high or low ceiling areas, narrow areas, confined space, steel structure areas, wall areas, stanchion areas, guardrail areas and other areas without support frame or plates.
Alternative for brand-new model
SUREALL explosion high bay lighting is the alternative lighting solution for eve lighting, eclipse 2, champ up, gl lighting, nevis light, nexled light, vtgg, vm lighting, vmvm and vmv tech solutions.
What Makes A High Bay Light Explosion Proof?
The specially designed explosion proof structure makes a high bay light explosion proof.
SUREALL explosion proof high bay lighting normally have three separate chambers, chamber for led driver, chamber for led lamp and chamber for connection. The chamber for led driver is normally Ex d flame proof housing such as SHB series and SO-I series which can withstand the mechanical pressure from the explosion inside the housing, or Ex e increased safety housing such as SHB-II series and SVM series whose electrical circuit are increased safety treated. The chamber for led lamp is designed with fins to reduce the temperatures for heat excellent dissipation performance. The chamber for connection is Ex d flame proof housing or Ex e increased safety housing with safe terminal blocks. No matter the housing inside explode or not, explosion proof high bay light can stop the explosion transmitted to the outside of housing to ensure the safety.
In a word, since we apply for explosion proof technology to stop the high bay light to become an ignition source to avoid the explosion in the site, then the high bay light could be explosion proof high bay light.
FAQs about Explosion Proof High Bay Lighting
Q
What is flame proof light?
A
Flame proof light is the most important and typical type of explosion proof lighting, we also call Ex d light, which means all electrical parts of the light are put inside a high strength flame proof enclosure, when explosion occurs inside the enclosure, the flame proof enclosure can withstand the exploding pressure without any damage and transmit the exploding energy through designed flame proof path to a negligible scope to outside of the enclosure to eliminate the formation of the explosion outside the enclosure.
Q
Are led lights flammable?
A
Led light is not likely to produce enough hot or high temperature to be flammable when considering the over-current and short-circuit condition since normally led lamp source are designed inside a certain housing to reduce the temperature rise with heat dissipation structure, especially for explosion proof led light, all led electrical parts is explosion proof protected for the utmost safety.
Q
What is the difference between high bay and low bay lighting?
A
High bay lights are normally used for ceiling more than 20 feet, low bay lights are normally used for ceiling lower than 20 feet, anyway, this is a simple way to distinguish high bay and low bay, the exact ceiling height will be depended on the requested and actual lumens on the lighting areas. Moreover, high bay light have a built-in deep reflector to distribute the light down from a high ceiling, low bay light have normal reflector and lens to distribute the light down from a low ceiling.
Q
What is a class 1 light fitting?
A
Class 1 definition come from the hazardous area classifications of NEC500 standard which classifies flammable substances into fours types, “M” for methane under mine, “class 1” for hazardous gas and vapor, “class 2” for hazardous dust and “class 3” for hazardous fiber, thus class 1 light fitting is explosion proof lighting specially used for hazardous locations which hazardous gas and vapor present normally and abnormally, but class 1 light fittings have two types, class 1 div 1 light fitting and class 1 div 2 light fitting. If the hazardous gas and vapor produce normally in the environment, you need to use class 1 div 1 light fitting, if the hazardous gas and vapor produce abnormally in the environment, you need to use class 1 div 2 light fitting.
Q
How heavy can a pendant light be?
A
The weight of pendant light depends on types and wattages, in most case, lower than 10 pounds for commercial pendant light, around 10 to 20 pounds for industrial pendant light, about 20 up to 60 pounds for explosion proof pendant light. As for the wattages, the enclosure will be bigger and heavier size when the wattage is higher for the same type of pendant light.
If you need any kinds of industrial flameproof light, please contact us, as a professional industrial led light manufacturer, SUREALL Tech is willing to offer you high quality products.
Send product request
Other supplier products
 |
Explosion Proof Receptacle | Products Show for Explosion Proof Receptacle Plug-in receptacle to provide power directly to electrical device for portable and turnaround pl... |
 |
Explosion Proof Connector Explosion Proof Reducing Bushing SR Series | Explosion Proof Connector Explosion Proof Reducing BushingSR Series Advantages Class I Division 1,Group A,B,C,D Zone 1, Zone 2 Class II Divi... |
 |
Emergency Strobe Lights | Products Show for Emergency Strobe Lights The emergency strobe light is made of led explosion-proof alarm light, 5w led explosion-proof horn, cl... |
 |
Explosion Proof Flashlight | Products Show for Explosion Proof Flashlight Touch, flashlight, portable work light to deal with temporary working cases, maintenance jobs in ex... |
 |
Explosion Proof Conduit Fittings | Products Show for Explosion Proof Conduit Fittings Fit one conduit end with other conduit ends together to run the cable and conduit to where cur... |
Same products
 |
CSD16301Q2 TRANSISTOR MOSFET N-CH 25V 6SON TEXAS INSTRUMENTS | Seller: ZK Electronic Technology Co., Limited | Part Number:CSD16301Q2 Description:CSD16301Q2 TRANSISTOR MOSFET N-CH 25V 6SON TEXAS INSTRUMENTS ... |
 |
CAPACITOR EEF-CX0J101R PANASONIC SMD SPEC POLYMER 100UF 6.3V SMD LF | Seller: ZK Electronic Technology Co., Limited | Part name:EEF-CX0J101R Description:CAPACITOR EEF-CX0J101R PANASONIC SMD SPEC POLYMER 100UF 6.3V ... |
 |
Heavy Copper PCB Manufacturer | Seller: Xinfeng Huihe Circuits Co., Ltd. | Heavy Copper PCB, pcb fabrication up to 12oz, large current, pcb circuitfabrication base material... |
 |
8 Layer ENIG Half Hole Custom PCB | Seller: Xinfeng Huihe Circuits Co., Ltd. | Number of layers: 8 Surface finish: ENIG Base material: FR4 Outer Layer W/S: 4/3mil Inner lay... |
 |
4 Layer ENIG Impedance Control Half Hole PCB Electric Circuit Board | Seller: Xinfeng Huihe Circuits Co., Ltd. | Number of layers: 4 Surface finish: ENIG Base material: FR4 Outer Layer W/S: 6/4mil Inner lay... |
