Danfoss pressure transmitter AKS 2050, Pressure transmitters with ratiometric output signal and pulse snubber

• 

AKS 2050 is a radiometric pressure transmitter that converts the measured pressure to a linear output signal. AKS 2050 is for high pressure and with pulse-snubber in the pressure connection. The min. value of the output signal is less than10% of the actual supply voltage. The max. value is more than 90% of the actual supply voltage.
At a supply voltage of 5 V, the output signal is:
• 0.5 V at min pressure range
• 4.5 V at max. pressure range
The robust design and the ratiometric output signal makes the transmitter suitable for systems together with ratiometric A/D converters within a number of fields:
• A/C systems
• Refrigeration plant
• CO2 plant
• Process control
• Laboratories
AKS 3000 is a series of absolute transmitters with high-level signal conditioned current output, developed to meet demands in A/C and refrigeration. AKS 3000 utilizes the proved piezoresistive measuring principle, which has been used for decades in Danfoss pressure transmitters.
The pressure reference is a sealed gauge. This means that atmospheric pressure variations have no influence on regulating accuracy. A must in accurate low pressure regulation. All materials in contact with the refrigerant and materials for the housing are AISI 316L stainless steel. No soft gaskets, all environmental sealings are made through laser weldings only. AKS 3000 has a 4 to 20 mA output, and is available with spade terminals for EN 175301-803 plug.

060G3958
AKS 3000
060G5604
060G5605
060G5606
060G5632

30. Danfoss pressure transmitter AKS 32 060G1889, Pressure transmitters with voltage output
AKS 32 are pressure transmitters that measure a pressure and convert the measured value to a standard 1-5 V d.c. or 0- 10 V d.c. voltage signal.
A robust design makes the AKS very suitable for application within a number of fields e.g.
• Air conditioning systems
• Refrigeration plant
• Process control
• Laboratories
Danfoss pressure transmitter AKS 32R 060G0090, Pressure transmitters with ratiometric output signal
AKS 32R is a ratiometric pressure transmitter that converts the measured pressure to a linear output signal. The min. value of the output signal is less than10% of the actual supply voltage. The max. value is more than 90% of the actual supply voltage.
Danfoss pressure transmitter AKS 33 060G1711, Pressure transmitters with 4-20 mA output signal
Danfoss pressure transmitter EMP 2 084G2100, Box-type pressure transmitters
The ship approved pressure transmitter EMP 2 is designed for use in almost all marine and industrial applications, and offers a reliable pressure measurement, even under harsh environmental conditions.
The pressure transmitter programme in box design is approved according to LR, DNV, GL, RINA, ABS, BV, NKK, CCS, KRS requirements, and covers a 4-20 mA output signal, gauge (relative) versions, measuring ranges from 0-1 to 0-400 bar, zero point and span adjustment, Pg 13,5 cable entry and different pressure connections.
A robust construction enables the pressure transmitter to meet the strictest requirements.
• 4 - 20 mA output signal
• Operating temperature -10 to 70° C
• Measuring range 0 - 400 bar
• Pressure connections G ¼, G ½A standard, G 3/8 A mano
• With zero point and span adjustment
• Available with all relevant marine approvals
• For use in harsh industrial / marine environments
Danfoss pressure transmitter MBS 1200 063G1138, MBS 1250 063G1123，MBS 1350 063G1306 MBS 1700 060G6100 OEM Pressure transmitter for Industrial applications
The compact OEM pressure transmitter MBS 1200 is designed for use in almost all industrial applications, and offers a reliable pressure measurement, even under harsh environmental conditions. Excellent vibration stability, robust construction, and a high degree of EMI protection equip the pressure transmitter to meet the most stringent industrial requirements.
• For media and ambient temperatures up to 125°C
• All standard output signals: 4-20mA, 0-5V, 1-5V, 1-6V, 0-10V, 10-90% ratiometric voltage
• Wetted parts made of stainless steel
• A wide range of pressure and electrical connections
• EMC protection up to 100 V/m
31. Danfoss pressure transmitter MBS 1800 063H1002, 063H2000，OEM pressure transmitters for cylinder pressure
Sensor for optimized service life for continuous pressure monitoring in diesel and gas engines. Due to its outstanding precision and long term stability of its quality, this sensor is suitable for demanding monitoring and control tasks.
• Highest precision
• High service life
• Long term stable quality
• Double Shell™ housing
• Patented pre-stressed element
• FE optimised membrane (Nickel based Alloy)
• Compact design for shoulder sealed installation
• Integrated charge amplifier with current or voltage output
• High quality charge amplifier with state of the art drift compensation circuit
Danfoss pressure transmitter MBS 1900 064G6501, MBS 2050 060G1404，MBS 2100 060G5849 MBS 2150 060G3913 060G5850 MBS 2250 060G5507 Pressure transmitter for air and water applications
The pressure transmitter MBS 1900 is designed for use in air and water applications like Booster Pumps and Air Compressors.
The flexible pressure transmitter programme covers different output signals, absolute and gauge (relative) versions, measuring ranges from 0-4 bar to 0-25 bar and a wide range of pressure and electrical connections.
Enclosure material is stainless steel AISI 316L.
• Designed for use in air and water applications
• Wetted parts of stainless steel (AISI 304)
• Pressure ranges in relative (gauge) or absolute from 0 up to 25 bar
• Output signals: 4 - 20 mA, or ratio metric
• Absolute or relative (gauge) sensor element
• A wide range of pressure and electrical connections
• Digitally compensated
• RoHS conformity
32. Danfoss pressure transmitter MBS 3000 060G1100, MBS 3050 060G1151，MBS 3100 060G1367， MBS 3150 060G1474 ，MBS 32 060G1222 Compact pressure transmitters
The compact pressure transmitter MBS 3000 is designed for use in almost all industrial applications, and offers a reliable pressure measurement, even under harsh environmental conditions.
The flexible pressure transmitter programme covers a 4-20 mA output signal, absolute and gauge (relative) versions, measuring ranges from 0-1 to 0-600 bar and a wide range of pressure- and electrical connections.
Excellent vibration stability, robust construction, and a high degree of EMC/EMI protection equip the pressure transmitter to meet the most stringent industrial requirements.
• 4 - 20 mA output signal
• Operating temperature -40 to 85° C
• Measuring range 0 - 600 bar
• Standard pressure connection G 1/4A ISO 228/1
• For use in severe industrial environments such as pumps, compressors, pneumatics and water treatment
The compact ship approved pressure transmitter MBS 3150 is designed for use in marine applications with severe medium influences like cavitation, liquid hammer or pressure peaks and offers a reliable pressure measurement, even under harsh environmental conditions.
The flexible pressure transmitter programme is approved according to LR, DNV, GL, RINA, ABS, BV, NKK, PRS, MRS, KRS requirements and covers a 4-20 mA output signal, absolute and gauge (relative) versions, measuring ranges from 0-1 to 0-600 bar, plug and cable connections and a wide range of pressure connections.
Excellent vibration stability, uniquely robust construction, and a high degree of EMC/EMI protection equip the pressure transmitter to meet the most stringent marine requirements.
• 4 - 20 mA output signal
• Operating temperature - 40 to 85° C
• Measuring range 0 - 600 bar
• Standard pressure connection G 1/4A, O-ring DIN 3852, G 1/2A DIN 16288
• With integrated pulse-snubber
• Available with all relevant marine approvals and designed to meet the strict demands on marine equipment
MBS 32 pressure transmitters are designed for use in almost all industrial applications, and offers a reliable pressure measurement, even under harsh environmental conditions.
The flexible pressure transmitter programme covers all standard voltage outputs, absolute and gauge (relative) versions, measuring ranges from 0-1 to 0-600 bar and a wide range of pressure and electrical connections.
Excellent vibration stability, robust construction, and a high degree of EMC/EMI protection equip the pressure transmitter to meet the most stringent industrial requirements.
• 0-5 V, 1-5 V, 1-6 V or 0-10 V output signals
• Operating temperature -40 to 85 °C
• Measuring range 0 - 600 bar
• A wide range of pressure connections available
• For use in severe industrial environments
33. Danfoss pressure transmitter MBS 3200 060G1676, MBS 3250 060G1600 MBS 33 060G1347Compact pressure transmitters
The compact high temperature pressure transmitter MBS 3200 is designed for use in almost all industrial applications, and offers a reliable pressure measurement, even under harsh environmental conditions.
The flexible pressure transmitter programme covers 4-20 mA, 0-5 V, 1-5 V, 1-6 V and 0-10V output signal, absolute and gauge (relative) versions, measuring ranges from 0-1 to 0-600 bar and a wide range of pressure and electrical connections.
Excellent vibration stability, robust construction, a high degree of EMC/EMI protection and a high operating temperature, equip the pressure transmitter to meet the most stringent industrial requirements.
• 4 - 20 mA, 0 - 5 V, 1 - 5 V, 1 - 6 V and 0 - 10 V output signal
• Operating temperature -40 to 125° C
• Measuring range 0 - 600 bar
• A wide range of pressure and electrical connections are available
• For use in severe industrial environments
The compact high temperature pressure transmitter MBS 3250 is designed for use in hydraulic applications with severe medium influences like cavitation, liquid hammer or pressure peaks and offers a reliable pressure measurement, even under harsh environmental conditions.
The flexible heavy duty pressure transmitter programme covers 4-20 mA, 0-5 V, 1-5 V, 1-6 V and 0-10V output signal, absolute and gauge (relative) versions, measuring ranges from 0-1 to 0-600 bar and a wide range of pressure- and electrical connections.
Excellent vibration stability, uniquely robust construction, a high degree of EMC/EMI protection and a high operating temperature equip the pressure transmitter to meet the most stringent industrial and hydraulic requirements.
• 4 - 20 mA, 0 - 5 V, 1 - 5 V, 1 - 6 V and 0 - 10 V output signal
• Operating temperature -40 to 125° C
• Measuring range 0 - 600 bar
• A wide range of pressure and electrical connections are available
• For use in severe industrial environments
• With pulse-snubber
Pressure transmitter MBS 33 is designed for use in almost all industrial applications, and offers a reliable pressure measurement, even under harsh environmental conditions.
The flexible pressure transmitter programme covers a 4-20 mA output signal, absolute and gauge (relative) versions, measuring ranges from 0-1 to 0-600 bar and a wide range of pressure and electrical connections.
Excellent vibration stability, robust construction, and a high degree of EMC/EMI protection equip the pressure transmitter to meet the most stringent industrial requirements.
• 4 - 20 mA output signal
• Operating temperature -40 to 85° C
• Measuring range 0 - 600 bar
• A wide range of pressure connections available
• For use in severe industrial environments
Danfoss pressure transmitter MBS 3300 060G5918, Pressure transmitter for high temperature marine applicationsThe compact high temperature pressure transmitter is designed for use in almost all marine applications, and offers a reliable pressure measurement, even under harsh environmental conditions.
The flexible pressure transmitter programme covers different output signals, absolute and gauge (relative) versions, measuring ranges from 0 – 1 to 0 – 600 bar and a wide range of pressure and electrical connections.
A robust design, an exellent vibration stability, and a high degree of EMC/EMI protection equip the pressure transmitter to meet the most stringent marine requirements.
• Designed for use in severe maritime environments
• For medium and ambient temperatures up to 125 °C
• Low supply voltage
• Output signal: 4 – 20 mA, 0 – 5 V, 1 – 5 V, 1 – 6 V, 0 – 10 V
• Enclosure and wetted parts of AISI 316L
• A wide range of pressure and electrical connections
• Temperature compensated, linearized and laser adjusted
• ATEX zone 2
• UL Haz loc Class 1, Div 2
34. Danfoss pressure transmitter MBS 33M 060G1233, Pressure transmitters for marine applications
The ship approved pressure transmitter MBS 33M is designed for use in almost all marine applications, and offers a reliable pressure measurement, even under harsh environmental conditions.
The flexible pressure transmitter programme is approved according to LR, DNV, GL, RINA, ABS, BV, NKK, PRS, MRS requirements and covers a 4-20 mA output signal, absolute and gauge (relative) versions, measuring ranges from 0-1 to 0-600 bar, plug and cable connections and a wide range of pressure connections.
Excellent vibration stability, robust construction, and a high degree of EMC/EMI protection equip the pressure transmitter to meet the most stringent marine requirements.
• 4 - 20 mA output signal
• Operating temperature -40 to 85° C
• Measuring range 0 - 600 bar
• A wide range of pressure connections available
• Available with all relevant marine applications and designed to meet the strict demands on marine equipment
Danfoss pressure transmitter MBS 4010 060G3203, Pressure transmitters with flush diaphragm
The flush diaphragm pressure transmitter MBS 4010 is designed for use in almost all industrial applications with non-uniform, high viscous or crystallizing media, and offers a reliable pressure measurement, even under harsh environmental conditions.
The pressure transmitter programme covers a 4-20 mA output signal, absolute and gauge (relative) versions, measuring ranges from 0-4 to 0-60 bar, plug and cable connections and a G1/2A pressure connection with a flush mounted diaphragm.
Excellent vibration stability, robust construction, and a high degree of EMC/EMI protection equip the pressure transmitter to meet the most stringent industrial requirements.
• 4 - 20 mA output signal
• Operating temperature -40 to 85° C
• Measuring range 0 - 60 bar
• With flush diaphragm
• For use in connection with aggressive, viscous, non-uniform and crystallizing media
Danfoss pressure transmitter MBS 4050 060G1348, Pressure transmitters with pulse snubber
The heavy duty pressure transmitter MBS 4050 is designed for use in hydraulic applications with severe medium influences like cavitation, liquid hammer or pressure peaks and offers a reliable pressure measurement, even under harsh environmental conditions.
The flexible pressure transmitter programme covers 4-20 mA, 0-5 V, 1-5 V, 1-6 V and 0-10V output signal, absolute and gauge (relative) versions, measuring ranges from 0-1 to 0-600 bar and a wide range of pressure- and electrical connections.
Excellent vibration stability, robust construction, and a high degree of EMC/EMI protection equip the pressure transmitter to meet the most stringent industrial requirements.
• 4 - 20 mA, 0 - 5 V, 1 - 5 V, 1 - 6 V or 0 - 10 V output signal
• Operating temperature -40 to 85° C
• Measuring range 0 - 600 bar
• With integrated pulse-snubber
• For use in harsh industrial environments
Danfoss pressure transmitter MBS 4201 060G3725, Pressure transmitters with Eex approvals
The intrinsically safe pressure transmitter MBS 4201 is designed for use in hazardous environments, and offers a reliable pressure measurement, even in harsh and requiring applications.
The flexible pressure transmitter programme is EEx ia IIC T6 explosion protected according to ATEX 100a and covers a 4-20 mA output signal, absolute and gauge (relative) versions, measuring ranges from 0-1 to 0-600 bar, plug connection and a wide range of pressure connections.
Excellent vibration stability, robust construction, a high degree of EMC/EMI protection and a high operating temperature, equip the pressure transmitter to meet the most stringent industrial requirements.
• 4 - 20 mA output signal
• Measuring range 0 - 600 bar
• Operating temperature depending on electrical connection
• Ex II 1G EEx ia IIC T4 - T6 in compliance with ATEX 100a
• Applicable in potentially explosive atmosphere: Zone 0, Zone 1 and Zone 2 (gases and vapour)
Danfoss pressure transmitter MBS 4251 060G3959, Pressure transmitters with Eex approval and pulse snubber
The intrinsically safe pressure transmitter MBS 4251 is designed for use in hazardous environments, and offers a reliable pressure measurement, even in harsh applications with severe medium influences like cavitation, liquid hammer or pressure peaks.
The flexible pressure transmitter programme is EEx ia IIC T6 explosion protected according to ATEX 100a and covers a 4-20 mA output signal, absolute and gauge (relative) versions, measuring ranges from 0-1 to 0-600 bar, plug connection and a wide range of pressure connections.
Excellent vibration stability, robust construction, a high degree of EMC/EMI protection and a high operating temperature, equip the pressure transmitter to meet the most stringent industrial requirements.
• 4 - 20 mA output signal
• Measuring range 0 - 600 bar
• Operating temperature depending on electrical connection
• Ex II 1G EEx ia IIC T4 - T6 in compliance with ATEX 100a
• Applicable in potentially explosive atmosphere: Zone 0, Zone 1 and Zone 2 (gases and vapour)
35.Danfoss pressure transmitter MBS 4500 060G2401, Pressure transmitters with adjustable zero and span
The high accuracy pressure transmitter MBS 4500 is designed for use in almost all industrial applications, and offers a reliable pressure measurement, even under harsh environmental conditions.
The flexible pressure transmitter programme covers a 4-20 mA output signal, absolute and gauge (relative) versions, measuring ranges from 0-1 to 0-600 bar, zero point and span adjustment, plug connection and a wide range of pressure connections.
Excellent vibration stability, robust construction, and a high degree of EMC/EMI protection equip the pressure transmitter to meet the most stringent industrial requirements.
• 4 - 20 mA output signal
• Operating temperature -40 to 85° C
• Measuring range 0 - 600 bar
• Available with many different pressure connections
• With zero point and span adjustment
• For use in severe industrial environments
Danfoss pressure transmitter MBS 4510 060G1605, Pressure transmitters with flush diaphragm and adjustable zero and span
The high accuracy flush diaphragm pressure transmitter MBS 4510 is designed for use in non-uniform, high viscous or crystallizing media within industry, food and beverage, and offers a reliable pressure measurement, even under harsh environmental conditions.
The pressure transmitter programme covers a 4-20 mA output signal, absolute and gauge (relative) versions, measuring ranges from 0-250 mbar til 0-25 bar, zero point and span adjustment, plug connection and a G1A conic pressure connection with a flush mounted diaphragm.
Excellent vibration stability, robust construction, and a high degree of EMC/EMI protection equip the pressure transmitter to meet the most stringent industrial requirements.
• 4 - 20 mA output signal
• Operating temperature -40 to 85° C
• Measuring ranges 0 - 250 mbar to 0 - 25 bar
• Available with many different pressure connections
• With zero point and span adjustment
• With flush diaphragm
• For use in food and beverage industry as well as industrial applications with aggressive, heterogeneous and highly viscous media
Danfoss pressure transmitter MBS 4701 060G3504, Pressure transmitters with Eex approval, adjustable zero and span
The intrinsically safe pressure transmitter MBS 4701 is designed for use in hazardous environments, and offers a reliable pressure measurement, even in harsh and requiring applications.
The flexible pressure transmitter programme is EEx ia IIC T6 explosion protected according to ATEX 100a and covers a 4-20 mA output signal, absolute and gauge (relative) versions, measuring ranges from 0-1 to 0-600 bar, zero point and span adjustment, plug connection and a wide range of pressure connections.
Excellent vibration stability, robust construction, a high degree of EMC/EMI protection and a high operating temperature, equip the pressure transmitter to meet the most stringent industrial requirements.
• 4 - 20 mA output signal
• Measuring range 0 - 600 bar
• Operating temperature depending on electrical connection
• With zero point & span adjustment
• Ex II 1G EEx ia IIC T4 - T6 in compliance with ATEX 100a
• Applicable in potentially explosive atmosphere: Zone 0, Zone 1 and Zone 2 (gases and vapour)
Danfoss pressure transmitter MBS 4751 060G4311, Pressure transmitters with Eex approval and pulse snubber, adjustable zero and span
The intrinsically safe pressure transmitter MBS 4751 is designed for use in hazardous environments, and offers a reliable pressure measurement, even in harsh applications with severe medium influences like cavitation, liquid hammer or pressure peaks.
The flexible pressure transmitter programme is EEx ia IIC T6 explosion protected according to ATEX 100a and covers a 4-20 mA output signal, absolute and gauge (relative) versions, measuring ranges from 0-1 to 0-600 bar, zero point and span adjustment, plug connection and a wide range of pressure connections.
Excellent vibration stability, robust construction, a high degree of EMC/EMI protection and a high operating temperature, equip the pressure transmitter to meet the most stringent industrial requirements.
• 4 - 20 mA output signal
• With pulse-snubber
• Measuring range 0 - 600 bar
• Operating temperature depending on electrical connection
• With zero point & span adjustment
• Ex II 1G EEx ia IIC T4 - T6 in compliance with ATEX 100a
• Applicable in potentially explosive atmosphere: Zone 0, Zone 1 and Zone 2 (gases and vapour)
Danfoss pressure transmitter MBS 5100, Block-type pressure transmitters for marine applications
The ship approved high accuracy pressure transmitter MBS 5100 is designed for use in almost all marine applications, and offers a reliable pressure measurement, even under harsh environmental conditions.
The pressure transmitter programme in block design is approved according to LR, DNV, GL, RINA, ABS, BV, NKK, PRS, MRS, KRS requirements, and covers a 4-20 mA output signal, absolute and gauge (relative) versions, measuring ranges from 0-1 to 0-600 bar, zero point and span adjustment, plug connection and female/flange pressure connections.
Excellent vibration stability, robust construction, and a high degree of EMC/EMI protection equip the pressure transmitter to meet the most stringent industrial requirements.
• 4 - 20 mA output signal
• Operating temperature -40 to 85° C
• Measuring range 0 - 600 bar
• Pressure connect G ¼ female
• Available with all relevant marine approvals
• Designed to meet the strict demands in marine equipment
36. Danfoss pressure transmitter MBS 5150 060N1003, Block-type pressure transmitters with pulse snubber for marine applications
The ship approved high accuracy pressure transmitter MBS 5150 is designed for use in marine applications with severe medium influences like cavitation, liquid hammer or pressure peaks, and offers a reliable pressure measurement, even under harsh environmental conditions.
The pressure transmitter programme in block design is approved according to LR, DNV, GL, RINA, ABS, BV, NKK, PRS, MRS, KRS requirements, and covers a 4-20 mA output signal, absolute and gauge (relative) versions, measuring ranges from 0-1 to 0-600 bar, zero point and span adjustment, plug connection and female/flange pressure connections.
Excellent vibration stability, robust construction, and a high degree of EMC/EMI protection equip the pressure transmitter to meet the most stringent industrial requirements.
• 4 - 20 mA output signal
• Operating temperature -40 to 85° C
• Measuring range 0 - 600 bar
• Pressure connect G ¼ female
• With integrated pulse-snubber
• Available with all relevant marine approvals
• Designed to meet the strict demands in marine equipment
Danfoss pressure transmitter MBS 6300 063G2300, Pressure transmitters for common-rail
The design of the high pressure transmitters, type MBS 6300 ensures that the transmitters are accurate and reliable, even in extreme environments with pressure peaks, vibration, temperature fluctuations and EMC interference.
The robust product design withstands humidity cycles and heavy vibration.
• Typical applications: High pressure fuel injection
• Designed for use in harsh environment
• Overload pressure 3000 bar
• Enclosure stainless steel (AISI 304)
• Wetted parts stainless steel (AISI 630)
• Pressure ranges from 0 up to 2500 bar
• Output signals: 4 – 20 mA, ratiometric and absolute voltage
• Temperature compensated
• High vibration stability
• For medium and ambient temperature up to 125 °C
36. Danfoss pressure transmitter MBS 8200 064G1125, Slim-line pressure transmitters
MBS 8200 is a series of compact pressure transmitters
developed to withstand the pressure pulsations and vibrations known in mobile and industrial hydraulic applications.
A new technology combining piezo resistive sensor element and programmable gain amplifiers
makes the MBS 8200 the obvious choice for applications demanding highest accuracy and insensitiveness against temperature variations. Further this technology enhances the functional safety by limiting the output signal at excess pressure conditions, it allows excellent sink/source capabilities and it leave the pressure transmitters unaffected by electromagnetic fields up to 100V/m.
.
• Designed for use in harsh industrial environments
• EMC protection 100 V/m
• Medium temperatures up to -40 to 125 °C
• 3.3 mA sink / source
• Reverse polarity protected
• Enclosure and wetted parts of AISI 316L
• Digitally temperature calibrated
• RoHS conformity
• Accuracy, typical +/-0.5% FS
Danfoss pressure transmitter MBS 8250 064G1064, Slim-line pressure transmitters with pulse-snubber
MBS 8250 with integrated pulse-snubber is designed for use in hydraulic applications with severe media influences like cavitation, liquid hammer or pressure peaks, and offers a reliable pressure measurement, even under harsh environmental conditions.
• Designed for use in harsh industrial environments
• EMC protection 100 V/m
• Medium temperatures -40 to 125 °C
• 3.3 mA sink / source
• Reverse polarity protected
• Integrated pulse-snubber. Protected against cavitation, liquid hammering and pressure peaks
• Enclosure and wetted parts of AISI 316L
• Digitally temperature calibrated
• RoHS conformity
• Accuracy, typical +/-0.5% FS
Danfoss pressure transmitter MBS 9200 064G5214, Compact pressure transmitters
Compact pressure transmitter programme, MBS 9200 is designed for use in industrial applications e.g. crankcase and turbocharger on industrial engines, filters monitoring as well as applications within level measurement.
The programme covers 4 – 20 mA output signal, gauge versions, measuring span from 40 – 250 mbar as well as bidirectional ranges e.g. –70 – 70 mbar etc.
Excellent vibration stability, robust construction, and a high degree of EMC/EMI protection equip the pressure transmitter to meet the most stringent industrial requirements.
• Compact design
• Pressure span from 40 – 250 mbar
• Bidirectional ranges available (flexible zero point) e.g. -70 – 70 mbar or -20 – 80 mbar etc.
• Digital temperature compensated
• Output signal: 4 – 20 mA
• Excellent shock and vibration robustness
• Reverse polarity protection
• With build-in clipping function on request
• Self-diagnostics
• Enclosure and wetted parts of stainless steel (AISI 316L)
• Customer specific versions on request
Danfoss pressure transmitter MBS 9300 064G5201, Low pressure transmitters for marine
Compact pressure transmitter programme, MBS 9300 is designed for use in marine applications e.g. crankcase and turbocharger filters monitoring as well as applications within level measurement.
The programme covers 4 – 20 mA output signal, gauge versions, measuring span from 40 – 250 mbar as well as bidirectional ranges e.g. -70 – 70 mbar etc.
Excellent vibration stability, robust construction, and a high degree of EMC/EMI protection equip the pressure transmitter to meet the most tringent industrial requirements.
• Compact design
• Pressure span from 40 – 250 mbar
• Bidirectional ranges available (flexible zero point) e.g. -70 – 70 mbar or -20 – 80 mbar etc.
• Digital temperature compensated
• Output signal: 4 – 20 mA
• Excellent shock and vibration robustness
• Reverse polarity protection
• With build-in clipping function on request
• Self-diagnostics
• Enclosure and wetted parts of stainless steel (AISI 316L)
• 10 international marine approvals
• Customer specific versions on request

Other supplier products

	SMC solenoid valve 2 Port LVM09/090, 2/3 Port Solenoid Valve for Chemicals	SMC solenoid valve 2 Port LVM10/100, 2/3 Port Solenoid Valve for ChemicalsSMC solenoid valve 2 Port LVM15/150, 2/3 Port Solenoid Valve for Chemical...
	Airtac 3V1 series 3V1-06 solenoid valve	1. Direct acting type and normally closed mode，flexible in direction change. 2. No need to add oil for lubrication. 3. Sever valves can be installe...
	Alco Multi-Port Gauge Valves \\\\\\\'T\\\\\\\' - Ported 3 way Ball Valve 6,000psi (414bar)	The Alco 3T series T ported high pressure diverting ball valve range offers a compact and safe way to divert, control, vent, or sample high pressur...
	Kaneko 4-way solenoid valve (SINGLE) -M15G SERIES	Feature Internal sliding parts extremely slippery by the hard-anodized, stick-slip has excellent abras...
	Parker miniature pneumatic solenoid valves	AIR VALVES AND FIELDBUS - ISYS MICRO，A06, 08, 10, 15 - CHINA，MICROVALVES M5 SERIES，PNEUMATIC VALVES - A05/A12 ADEX SERIES，PULSE VALVE，P2M MODUFLEX，...

Same products

	ABB Bailey Analog Input Module IMASI13	Seller: 840499	监控温度、压力、流量和液位等过程变量与传感器和变送器接口数据采集和记录工业自动化任务 制造商：ABB、Bailey型号：ABB Bailey Infi 90、ABB Bailey Infi 90...
	Embedded Systems Programming Industrial ARM Edge Computer Controller ARMxy	Seller: Shenzhen Beilai Technology Co.,Ltd	The ARMxy BL330 series is a versatile industrial ARM controller designed for flexibleI/O configur...
	Indutrial IoT Embedded ARM Controller Optional GPIO DI DO Relay Module	Seller: Shenzhen Beilai Technology Co.,Ltd	The ARMxy BL330 series is a versatile industrial ARM controller designed for flexibleI/O configur...
	High performance T113-i Chip 1+8CB eMMC AR Edge Computer Support Secondary Development	Seller: Shenzhen Beilai Technology Co.,Ltd	The ARMxy BL330 series is a versatile industrial ARM controller designed for flexibleI/O configur...
	4DI+4D0 Wireless 4G 5G ARM Embedded Edge Gateway for Industrial Remote Monitoring	Seller: Shenzhen Beilai Technology Co.,Ltd	The ARMxy BL330 series is a versatile industrial ARM controller designed for flexibleI/O configur...