Bettersizer 2600
Laser Particle Size Instrument(Dry & Wet Dispersions)
The Bettersizer 2600 utilizes this laser diffraction technology. There are 92 photoelectric detectors to convert light signals from the scattering spectrum to electrical signals, which are transmitted into an intelligent software. By implementing the Mie scattering theory to the data and performing mathematical conversion, the complete particle size distribution can be derived.
Measurement: Particle size
Particle size range:
Wet dispersion: 0.02 to 2600μm
Dry dispersion: 0.1 to 2600μm
Dispersion type: Wet and Dry
Technology: Laser diffraction
Precise measurement of both large and small particles covering the broadest range by a new patented technology utilizing both Fourier and Reverse Fourier optical systems
Optical bench with 92 detectors covering an angular range of 0.016° - 165°
Optional wet and/or dry dispersion
Small volume dry dispersing module for small sample quantities especially for pharmaceutical or valuable samples in short supply
Easy and fast to changeover between dispersing modules
Easy to implement, create and use Standard Operation Procedures for new materials
Automatic alignment of the optical system
User-friendly software, easily learnt
Download Brochure Request Demo
The Fundamentals of Bettersizer 2600
Sample Dispersion ModulesBT-802Wet Small VolumeBT-80N
BT-902BT-903
Sample DispersionWet sample dispersionWet small volume sample dispersionAnti-corrosive sample dispersion
Dry sample dispersionDry small volume sample dispersion
Dispersion Modules
Combine with Main Device
BT-903 Combine with Main Device
Volume600mL (dispersion medium)8 mL (dispersion medium)80 mL (dispersion medium)
- 0.02 - 1 g (sample)
AutomationFull-automatedSemi-automatedSemi-automated
Full automatedFull automated
Application Notes
Application of Laser Particle Size Analyzer in Pigments
21 Jun 2021
Particle Size and Shape Analysis of Powder Coatings
01 Jun 2021
Particle Size Analyzing of Chocolate by Laser Diffraction
04 Jun 2021
Investigating the Relation Between Coffee Extraction and Ground Coffee Size
08 Jun 2021
FeaturesSOPPerformanceTechnologySpecificationInquiryAccessory
1）FOURIER AND REVERSE FOURIER OPTICAL SYSTEM
The Bettersizer 2600 is superior in the combination of Fourier and inverse Fourier design. This smart design allows, on the one hand, the detection of stray light in a very wide angular range from 0.016° to 165°. On the other hand, in contrast to the inverse Fourier design, the particles do not have to lie on one plane – the simultaneously accurate measurement of small and large particles is therefore achieved.
Features of combination of Fourier and inverse Fourier design
Spherical detector array: Forward, lateral and backward detectors in 92 pieces in total;
Super large Fourier lens;
Small footprint: Compact design to save space
2）INTUITIVE AND POWERFUL SOFTWARE
Intuitive operation and orderly user interface
Real-time mode for determining the optimal measurement conditions
Fully automatic measurement routine
Automatic cleaning routine
Automatic data backup and highly customizable reports
Direct conversion according to Fraunhofer and Mie evaluation models
Switch between wet and dry dispersion modules with one click
3）WET DISPERSION
BT-802 is designed for particle size measurement with water as the medium.
BT-802 is made up of ABS shell. The components of it include centrifugal pump, peristaltic pump, ultrasonic disperser, pinch valve, control circuit, etc. The stirring speed is adjustable from 500 - 2500 rpm. Built-in ultrasonic system (50 W) ensures stable dispersion of samples.
BT-80N is designed for particle size measurements with organic solvents as the media. BT-80N is suitable for common organic solvents, for example:
EthanolMethanolIsopropanolEther
TolueneXyleneDichloromethaneOctane
Ethyl acetateAcetoneMethyl oleateNMP solvents
BT-80N is made up of stainlesssteel shell. The components of it include centrifugal pump, ultrasonic disperser, PTFE pipeline, sintered-quartz sample cell, control circuit, etc.
Wet Small Volume Dispersion Module is designed for valuable or small-volume sample measurements, where the medium is solvent or water. The module consists of ABS shell, stirring motor, cuvette (8 ml), stirrer, etc.
Maximum volume in 8 mL with samples mass in 0.005 - 0.1 g.
Suitable for samples dispersed in water or organic phase.
4）DRY DISPERSION
BT-902 is suitable for dry powders particle size measurements. The gas used can be compressed air, nitrogen or other noble gases.
BT-902 is made up of electromagnetic vibration feeder, venturi pipe, gas circuit, electric circuit, pressure sensor, etc.
BT-903 is designed for particle size measurements of valuable and small amount dry powders with a minimum samples volume of 20 mg.
BT-903 is composed of venturi pipe, gas circuit, electric circuit, samples tube, etc.
5）Application
Related Powder Characteristics Tester
Bettersizer S3 Plus
2 to 3500μm(Image System)
Bettersizer ST
Particle size: 0.1 to 1000µm
Nanoptic 90 Plus
Particle size: 0.4nm to 9μm
BT-Online1
Particle size: 0.1 to 1000µm
If you want to know more about particle sizer price, please contact us.
Send product request
Other supplier products
 |
BT-Online1 | Online Particle Size Analyzer BT-Online1 online particle size analysisis an on-line particle size monitoring system for real-time particle size mo... |
 |
BeDensi T Series | Tapped Density Meter BeDensi T series Tapped Density Meter Apparatus includes BeDensi T1 (one cylinder), BeDensi T2 (two cylinders) and BeDensi T3 ... |
 |
BeVision D2 | BeVision D2 Image Analyzer Grain SizeAnalyzerwith Dry Dispersion The BeVision D2 particle image analyzer(particle shape analyzer) is a microsco... |
 |
Bettersizer ST | Laser Particle Size Analyzer, Laser Granulometry Bettersizer ST laser scattering particle size distribution analyzerincludes the patented Dual Lens... |
 |
BeDensi B1 | Bulk Density Tester As the tap density machine, BeDensi B1 bulk density testing equipment adopts natural deposition method. Powder density measurem... |
Same products
 |
iX361 middle frame correction clamp | Seller: Shenzhen weikexiu technology Co.,Ltd | Fixes iCF6/iA3/iX16/iX361 mobile phone screen middle frame repair jig. iFixes iCF6 non-heating sc... |
 |
SINGLE PHASE ELECTRICITY METER TESTER | Seller: 782364 | GF112D is a single-phase handheld electronic meter test unit in accuracy class 0.05, 0.1or 0.2, u... |
|
|
SINGLE PHASE ELECTRICITY METER TESTER | Seller: 782364 | GF112D is a single-phase handheld electronic meter test unit in accuracy class 0.05, 0.1or 0.2, u... |
|
|
SINGLE PHASE ELECTRICITY METER TESTER | Seller: 782364 | GF112D is a single-phase handheld electronic meter test unit in accuracy class 0.05, 0.1or 0.2, u... |
 |
Digital Track Gauge | Seller: Wuhan linkage track equipment co.,ltd | 产品描述 数字轨头耐磨计主要用于测量钢轨的垂直磨损和横向磨损。合理的设计使其轻巧，操作方便，阅读直观。 特征 1、直读数字型：液晶显示屏，清晰可读;无需计算，可直接读取;读数时，按... |
