Circular Locus Pilling Tester
The instrument is used to test the pilling conditions ofwool fabric, chemical fiber cotton, and blended, knitted, woven fabric to identify product quality and process effect. When testing, the fabric is rubbed against nylon brush and abrasive, or rubbed against abrasive only in the humidity state.
Standard
GB/T.1Determination of pilling properties of textile fabrics – Part 1: Circular trajectory method
JIGBell-type gas flow standard device verification procedures
DIN.2Testing of textiles – Wear test of flat fabrics – Roll to mill
Features
1. Scientific mechanical structure, smooth rotation, no mechanical noise, no contact fatigue failure, suitable for long continuous operation.
2. The use of standard nylon brush, the rigidity of nylon wire must be uniform, so as to control the fluff effect of nylon brush.
3. Ergonomic design, the surface using a spray forming, smooth and beautiful.
Test Parameters
| Items | Parameters |
|---|---|
| Grinding head is in contact with grinding plane | ≤0.2mm |
| The parallelism of grinding head and grinding plane | ≤0.3mm |
| The relative movement trajectory of grinding head and grinding plane | 40±1mm |
| Nylon brush surface is flush, its height difference | <0.5mm |
| Grinding plane reciprocating speed | 60±1 times/min |
| Weight of grinding head | 490cN±1% |
| Weight of heavy hammer | 290cN±1% |
| Weight of hammer | 100cN±1% |
| Select the number of times | 1~9999 |
Test Reference
| Sample type | Pressure / cN | Number of fluff times | Number of pilling times |
|---|---|---|---|
| Synthetic fiber knitted fabric | 590 | 150 | 150 |
| Chemical fiber woven fabric | 590 | 50 | 50 |
| Military service (combed blended) | 490 | 30 | 50 |
| Combed wool fabric | 780 | 0 | 0 |
| Coarse wool fabric | 490 | 0 | 50 |
Send product request
Other supplier products
 |
Heat Storage Performance Tester ASTM F2731 | Standards ASTM F2731 ?Standard Test Method for Measuring the Transmitted and Stored Energy of Firefighter Protective Clothing Systems Application... |
 |
Vehicle Cabin Air Filter Tester | Applicable standards: DIN 71460-1 Road vehicles - Air filters for passenger compartments of motor vehicles - Part 1: particulate matter filtration... |
 |
Battery Nail Penetration Fire Tester | The nail bed combustion instrument is a professional instrument used to test the combustion performance of various materials. It is mainly used for... |
 |
Medical needle toughness tester | Medical needle toughness tester - Other test instrument - standard Product Information: Medical needle injection needle toughness tester using 5.... |
 |
Shank Flexural Strength Tester | Product Introduction: The electric hook core anti-bending performance tester is used to test the anti-bending performance of the steel hook core. ... |
Same products
 |
UV Detector | Seller: Xinsheng Pharmaceutical Instrument Co., Ltd | The ultraviolet-visible dual-wavelength detector features high sensitivity and a wide linear rang... |
 |
Fabric ici pilling and snagging box | Seller: Standard International Group (HK) Limited | Fabric ici pilling and snagging boxis composed of the same speed motor drive, and to maintain the... |
 |
Martindale Abrasion And Pilling Tester | Seller: Standard International Group (HK) Limited | To determine the abrasion and pilling resistance of all kinds of textile structures. Samples are ... |
 |
Circular Locus Pilling Tester | Seller: Standard International Group (HK) Limited | Testing Standards: GB/T 4802.1. JIG 040-1990 Product Information: The Circular Locus Pilling... |
 |
Bean Bag Snag Tester | Seller: Standard International Group (HK) Limited | Bean Bag Snag Tester, to determine the snagging and picking resistance of knitted and woven fabri... |
