Anmei-PA6 GF for Engineering Plastics
As an engineering plastic company, Anmei focuses on the production of modified engineering plastics, among which high-performance nylon 6 engineering plastics are one of our main products. We have nylon 6 modified plastics of heat-resistant, reinforced, toughened, flame-retardant, wear-resistant, weather-resistant, oil-resistant and conductive with glass fiber filling ranging from 15% to 50%. The mechanical properties of blended materials such as glass fiber and toughening agent added to nylon show that with the increase of glass fiber content, the tensile strength, impact resistance and heat resistance are better, and the bending strength has been greatly improved as well, which meet the requirements of industrial products and daily use. The polyamide 6 pricethat Anmei offers is very competitive. Contact us now to get more detailed information about PA6 price.
Types of PA6 GF
As one of engineering plastic manufacturers, we provide polyamid pa6gf to meet the specific needs of various applications.
Our pa 6 materialsuch as pa6 gf45, pa 6gf 35, pa6 gf 25 has very high rigidity, high mechanical strength, high hardness and toughness, and high creep strength. Moreover, they have a very high dimensional stability, good fatigue resistance and high mechanical damping properties. Click below to check more about types of pa6 gf in Anmei.
PA6 GF15
PA6 GF15 heat stabilized is the reinforced PA6by mixing the glass fiber of 15%. It can be in different colors with excellent high-temperature resistance comprehensive properties.
PA6 GF20
PA6 GF20 is a PA6 material reinforced with 20% glass fiber.
PA6 GF30
PA 6 GF30 is a 30 % glass fiber reinforced polyamide 6.
PA6 GF35
PA6 GF35 is adding 35% glass fiber to the base material of PA6.
PA6 GF45
PA6 GF45 is polyamide PA6 reinforced with 45% glass fibers.
PA6 GF50
PA6 GF50 is a fiber reinforced PA 6 plasticmade of nylon 6 resin as a base material and 50% glass fiber as a reinforcing filler, and various processing aids be added.
What Is PA6 Plastic？
Polyamide (Nylon) of Anmei is a versatile engineering plastic that is available in different "grades" and applied accordingly, which is is one of the most extensively used polyamides globally. PA 6 (Polyamide 6) and PA 66 (nylon 66 PA66) are used for parts required for large repetitive jobs. PA 6 GF provides enhanced strength and abrasion resistance while maintaining a low weight for improved balance and reduced vibration.
What is the difference between GF15 and GF50
The number of glass fibers per unit area of the material will increase when the glass fiber content increases, which means that the PA6 matrix between the glass fibers will become thinner. This change determines the changes in the mechanical properties of glass fiber reinforced PA6 composites in terms of tensile strength, impact toughness, flexural strength, etc. But it's not that more glass fiber is better. The content of glass fiber higher than 42% will cause the notched imPAct strength to show a downward trend. 15% has high rigidity and strength, excellent durability (heat resistance, weather resistance, oil resistance), suitable for pump impeller, motor housing, etc., 30% and 45% are suitable for replacing some metal materials, and 50% content is suitable for long-term heat Stable performance and automobile engine parts which need excellent strength and toughness.
Why Choose Anmei PA6 GF
There are 3 key elements to improve GF reinforced PA6 material.
GF dosage is the primary factor.
In the dosage range of 0-35%, increasing the dosage of GF can sinicanty improve the mechanical properties of PA6.
Performance comparison between PA6 and glass fiber reinforced PA6
Send product request
Other supplier products
 |
Masterbatch | We are here to be your reliable partners of Color Masterbatch. Color masterbatches are widely used in polyethylene(PE), polypropylene(PP), polysty... |
 |
PA66 GF30 (A2000F, A2011F, A2111F) | PA6630GFis a polyamide 66 reinforced with 30% glass fibers. It demonstrates outstanding mechanical properties such as high fluidity, high toughness... |
 |
Anmei-Polyamide Nylon 6 (PA6) for Engineering Plastics | Other than fiber-reinforced pa6 polyamide, the unreinforced nylon type 6 produced by Anmei, one of the professional nylon 6 suppliers/manufacturers... |
 |
PA66 GF35 (A2000G, A2011G, A2111G) for Engineering Plastics | PA66 is nylon 66, namely polyamide 66. GF is glass fiber. Generally expressed as pa6 6gf35, that is, 35% glass fiber is added to nylon 66. Typic... |
 |
PA6 GF45 (A1011I) for Engineering Plastics | Polyamide 6 reinforced with 45% Glass Fibers that is PA6 GF45, medium viscosity and dimensional stability, the PA GF45has excellent rigidity and hi... |
Same products
 |
Medical Plastic Parts | Seller: Packson Mold Co.,Ltd | Project Management To be a qualified medical plastic components manufacturer, the most advanced ... |
 |
PA66 GF15 Heat Stabilized (A2006C, A2016C) for Engineering Plastics | Seller: Suzhou Anmei Material Technology Co., Ltd | PA 66 GF 15is a 15% glass fiber reinforced, heat-resistance, polyamide 66 resin for injection mol... |
 |
PA66 GF | Seller: Suzhou Anmei Material Technology Co., Ltd | Anmei focuses on the production of modified engineering plastics. We have polyamide pa6 6gfmodif... |
 |
Nylon6 PA6 | Seller: Suzhou Anmei Material Technology Co., Ltd | Other than fiber-reinforced pa6 polyamide, the unreinforced nylon type 6 produced by Anmei, one o... |
 |
Nylon 66 Pa66 With High Tensile Strength (A2307X01, A2317X01) for Engineering Plastics | Seller: Suzhou Anmei Material Technology Co., Ltd | Using Polyamide 66 as the basic resin, the tensile strength of nylon 66 is obtained by blending a... |
