AIR COOLED SCREW CHILLER

• 

The air-cooled chiller adopts a finned condenser, which has fast heat conduction and good heat dissipation effect without the need to provide cooling water. It can provide ice water at 5~35℃, and the low temperature type can be as low as 3℃ (the temperature difference does not exceed ±1℃), the screw compressor chiller's compressor power ranges from 40HP to 240HP, and the cooling capacity can reach 88924~581360 Kcal/hr.

Features Of Air Cooled Screw Chiller
Adopt imported compressor

The copper tube is welded without oxygen

Efficient evaporator and condenser, energy saving

The high-power equipment adopts multi-group compressor,

Automatically adjust start and stop as needed

Equipped with communication interface, can undertake future industry 4.0

For more information about air cooled screw chiller working principle, please feel free to contact us!

If you need any kinds of plastic machine, please contact us, as a professional plastic machinery factory, Soxi is willing to offer you high quality products.

Other supplier products

	HOT AND COLD INTEGRATED MOLD TEMPERATURE CONTROLLER	The cooling and heating integrated machines are equipped with cold water and hot water channels, which can adapt to the different high and low-temp...
	Oil Mold Temperature Machine (CTCO)	Use oil as the heat transfer medium, connect the mold waterway through pipes, and directly exchange heat with the mold. It has the advantages of hi...
	EUROPEANIZATION DOUBLE-LAYER HOT AIR DRYER	The stainless steel series hopper dryer has the function of blowing hot air and vortex exhaust function. The hopper is double insulated and is suit...
	MOLD TEMPERATURE MACHINE CONTROLLER BY SOXI: ALWAYS THE RIGHT CHOICE	Mold temperature machine, MTC, mold heater, In a broad sense, called mold temperature controller, oil/water mold heaters. Mold temp controller cont...
	PROPORTIONAL MIXER	The vertical agitating mixer is a multi-piece vertical blade, which produces vortex omni-directional mixing. It has strong mixing power and complet...

Same products

	Medical Plastic Parts	Seller: Packson Mold Co.,Ltd	Project Management To be a qualified medical plastic components manufacturer, the most advanced ...
	PA66 GF15 Heat Stabilized (A2006C, A2016C) for Engineering Plastics	Seller: Suzhou Anmei Material Technology Co., Ltd	PA 66 GF 15is a 15% glass fiber reinforced, heat-resistance, polyamide 66 resin for injection mol...
	PA66 GF	Seller: Suzhou Anmei Material Technology Co., Ltd	Anmei focuses on the production of modified engineering plastics. We have polyamide pa6 6gfmodif...
	Nylon6 PA6	Seller: Suzhou Anmei Material Technology Co., Ltd	Other than fiber-reinforced pa6 polyamide, the unreinforced nylon type 6 produced by Anmei, one o...
	Nylon 66 Pa66 With High Tensile Strength (A2307X01, A2317X01) for Engineering Plastics	Seller: Suzhou Anmei Material Technology Co., Ltd	Using Polyamide 66 as the basic resin, the tensile strength of nylon 66 is obtained by blending a...