PA6 GF30 Halogen-free FR (A1015F) for Engineering Plastics
PA6FRis a PA6 with 30% glass-fibers and flame retardant free of halogens.
Typical Application of PA6 GF30 halogen-free FR (A1015F)
PA6 GF30flame retardant free of halogens has achieved full coverage from electronic&electrical fields to the industrial, commodity consumer market, and even the automotive industry. Such as MCB panel (v0), power tool housing (HB), small household appliance accessories for bread machine housing and vacuum cleaner accessories (HB), and daily necessities structural parts-office chair legs (HB) and exhaust duct (HB), etc.
Other Details of PA6 GF30 halogen-free FR (A1015F)
Physical Property
Ash |
(15.0% 1 ISO3451/1) |
Conditioned |
600°C*2h |
Density |
(1250Kg/m3 1 ISO1183) |
Conditioned |
23°C |
Shrinkage Parallel Flow |
(0.5-0.7 % 1 ISO294-4) |
Shrinkage Vertical Flow |
(0.7-1.1% I ISO294-4) |
Mechanical Properties
Tensile strength(125.0MPa 1 ISO527) Conditioned |
5mm/ min |
Tensile Strain at Break(2.5% I ISO527) Conditioned |
|
Notched Impact Strength(125 0MPa I ISO527) Conditioned |
2mm/min |
Flexural Strength(190MPa 1ISO178) Conditioned |
2mm/min |
Flexural Modulus(5700 MPa I ISO178) Conditioned |
5mm/ min |
Thermal Property
Melting Point |
(220°C I ISO11357) |
Hot Deformation Temperature |
(175*C I ISO75) |
Conditioned |
|
Flammability Class |
(HB 1UL94) |
Conditioned |
mm |
Injection Molding Conditions
Drying Temperature |
130°C |
Drying Time |
3h |
Cylinder Temperature |
240-260°C |
Nozzle Temperature |
240-260*C |
Tooling Temperature |
80*C |
* Molding conditions arejustfor reference, please make an adjustment based on the actual situation!
Suzhou ANMEIMaterial Technology Co., Ltd. – the professional supplier of engineering plastic and the color masterbatch was founded in 2013, which is located in Tongli - the millennium ancient town, 50km far away from Shanghai, the location is very convenient for transportation.
Send product request
Other supplier products
Engineering Plastic | We are here to be your reliable partners of modified plastic. Engineering plastic is the high-performance plastic that can apply in different indu... | |
PA66 GF15 Heat Stabilized (A2006C, A2016C) for Engineering Plastics | PA 66 GF 15is a 15% glass fiber reinforced, heat-resistance, polyamide 66 resin for injection molding. PA66 15 GFStorage and Handling PRE-PROCE... | |
PA6 GF20 Heat Stabilized (A1006D, A1016D) for Engineering Plastics | PA6 GF 20has 20% glass fiber filler. It has much greater heat-resistant mechanical properties than unfilled polyamide. Anmeiplastics has always bee... | |
Color Masterbatch for Engineering Plastics | Color Masterbatch for Engineering Plastics As an engineering plastic company, Anmei serves customers with tailored-making solutions from standard ... | |
Anmei-ABS Engineering Plastic | ABS resin is a terpolymer composed of acrylonitrile, butadiene and styrene. ABS has the rigidity, chemical resistance and heat resistance of polyac... |
Same products
Medical Plastic Parts | Seller: Packson Mold Co.,Ltd | Project Management To be a qualified medical plastic components manufacturer, the most advanced ... | |
PA66 GF15 Heat Stabilized (A2006C, A2016C) for Engineering Plastics | Seller: Suzhou Anmei Material Technology Co., Ltd | PA 66 GF 15is a 15% glass fiber reinforced, heat-resistance, polyamide 66 resin for injection mol... | |
PA66 GF | Seller: Suzhou Anmei Material Technology Co., Ltd | Anmei focuses on the production of modified engineering plastics. We have polyamide pa6 6gfmodif... | |
Nylon6 PA6 | Seller: Suzhou Anmei Material Technology Co., Ltd | Other than fiber-reinforced pa6 polyamide, the unreinforced nylon type 6 produced by Anmei, one o... | |
Nylon 66 Pa66 With High Tensile Strength (A2307X01, A2317X01) for Engineering Plastics | Seller: Suzhou Anmei Material Technology Co., Ltd | Using Polyamide 66 as the basic resin, the tensile strength of nylon 66 is obtained by blending a... |