.

Self Adhesive PTFE Sheet

Self Adhesive PTFE Sheet

PTFE surface itself is not adhesive, such as want to bond and other substances must need one side and two sides after Nana chemical treatment, and rubber, metal, and other substances bond, in special use, make up for the non-adhesive performance of polytetrafluoroethylene products.

PTFE nai sodium polytetrafluoroethylene nai sodium surface treatment processing Teflon sodium bonding, PTFE -PTFE nai sodium surface treatment, PTFE tetrafluoroethylene surface is not adhesive, to metal or other substances must be bonded after sodium treatment, after treatment with rubber, metal, plastic, wood, non-metal and other substances bonding. Sodium method - mainly through corrosion liquid and PTFE tetrafluoroborate, strip, film surface chemical reaction, pull off part of the fluorine molecules on the surface, this is left on the surface carbonization layer and some polar groups, so as to get activated tetra fluoro fluoride, tetrafluoroPTFE after sodium increase its polarity and surface tension, PTFE tetra fluoro fluoride surface after sodium coffee color.

Specification of Adhesive Backed PTFE Sheet

Product name

Specification(mm)

Square plate(length)

Circular plate(diameter)

Thickness

PTFE molded plate

Molded plate

≦ 800

≦800

1-50

Big molded plate

1000̶ 1600

1000-1800

3-30

PTFE skived sheet

Skived sheet

Width of cloth ≦600

Big skived sheet

Width of cloth: 600-1500

Note: Specific size is available as per customer's requirement

PTFE sheet with adhesiveis divided into 2 kinds: molded sheet and skiving sheet.PTFEplasticmoulded sheet is made of suspension resin by moulding and sintering.PTFE skiving sheet is turned with an embryo which is formed by moulding or hydraulic pressing.

The Technical Indexes of Self Adhesive PTFE Sheet

Product name

The implementation of standards

The technical performance index

Remarks

The proportion of

(Mpa) Tensile strength

(%)Crack elongation

(KV/mm)

Witstanding voltage

Molded sheet

Oridinary type

ZGB33002 SFB-1 & SFB-2

≥15

≥150

SFB-1≥10

Bridge use

JT/T901-2014

≥30

≥300

Skived sheet

ZBG 33002 SFB-1 & SFB-2

≥15

≥150

SFB-1≥10

Feature of Self Adhensive PTFE Sheet

Heat resistance

can work stably from -180℃ to +260℃.

Stickiness

After surface treatment, etched PTFE can be glued to other materials, such as rubber, metal, plastic, etc.

Good mechanical property

No deformation, low friction coefficient.

High Lubrication

Lower friction coefficient in solid material.

If you want to know more kinds of ptfe product, please visit our website.



Send product request

To: Jiangsu Xinrui Plastic Technology Co.,Ltd
Your E-mail:
Message text:


Send to other suppliers

Other supplier products

PTFE Slide Bearing Plate
PTFE Slide Bearing Plate PTFE Slide Bearing Plates The product is made of PTFE suspended fine powder resin, cold pressed into billet, sintering forming, pressing grease gr...
PTFE Rods/Bars
PTFE Rods/Bars PTFE (polytetrafluoroethylene) rods/bars are widely used in industries such as engineering, electronics, and chemical processing, where their excep...
PTFE Molded Rods
PTFE Molded Rods In the field of electronics, PTFE moulded rod is often used in semiconductor manufacturing process chip packaging, electronic components protection...
Graphite Filled PTFE Products
Graphite Filled PTFE Products Graphite Filled PTFEProducts Graphite filled ptfe o ringand graphite filled ptfe rodproducts are composite materials made by incorporating graphit...
PTFE Braided Packing
PTFE Braided Packing PTFE braided packingis a new type of sealing packing with desperse Teflon tape or tensile belt after the woven. The graphited PTFE packinghas excel...
All supplier products

Same products

Medical Plastic Parts
Medical Plastic Parts Seller: Packson Mold Co.,Ltd Project Management To be a qualified medical plastic components manufacturer, the most advanced ...
PA66 GF15 Heat Stabilized (A2006C, A2016C) for Engineering Plastics
PA66 GF15 Heat Stabilized (A2006C, A2016C) for Engineering Plastics Seller: Suzhou Anmei Material Technology Co., Ltd PA 66 GF 15is a 15% glass fiber reinforced, heat-resistance, polyamide 66 resin for injection mol...
PA66 GF
PA66 GF Seller: Suzhou Anmei Material Technology Co., Ltd Anmei focuses on the production of modified engineering plastics. We have polyamide pa6 6gfmodif...
Nylon6 PA6
Nylon6 PA6 Seller: Suzhou Anmei Material Technology Co., Ltd Other than fiber-reinforced pa6 polyamide, the unreinforced nylon type 6 produced by Anmei, one o...
Nylon 66 Pa66 With High Tensile Strength (A2307X01, A2317X01) for Engineering Plastics
Nylon 66 Pa66 With High Tensile Strength (A2307X01, A2317X01) for Engineering Plastics Seller: Suzhou Anmei Material Technology Co., Ltd Using Polyamide 66 as the basic resin, the tensile strength of nylon 66 is obtained by blending a...