Silicone Rubber for Cable Accessories (DBPMH/Platinum)
GA-9442/GA-9443 platinum rubberhave good fluidity, suitable for high voltage injection molding, compression molding, or extrusion molding techniques to produce power cable accessories.
GA-9440E cable rubberhas good fluidity property, suitable for producing power electric cable accessories under molding or extrusion molding technique. this product has excellent mechanical property.
Features of Silicone Rubber for Cable Accessories (DBPMH/Platinum)
Injection molding
Anti-pollution, and anti-aging
Excellent electrical performance
Excellent weather ability
Good extrusion property
Excellent electrical performance
High elongation
Application: Cable terminal, Electric cable accessories, Shrinkage product, Shrinkage pipe sleeve
Differences of Silicone Rubber for Cable Accessories (DBPMH/Platinum)
GA-9442/GA-9443 Series Heat Cure Rubber
GA-9440 Heat Cure Rubber
Typical characteristics
|
Product code |
GA-9440 |
|
Appearance |
Translucent |
|
William plasticity |
150 |
|
Hardness (ShoreA) |
43 |
|
Density(g/cm³) |
|
|
Tensile strength(Mpa) |
|
|
Elongation(%) |
900 |
|
Fixed tensile set(200%*175℃*8H*30min) |
7 |
|
Tear strength(KN/m) |
45 |
|
Dielectric constant at 100HZ |
|
|
Dissipation factor at 100HZ |
|
|
Tracking resistance |
--- |
|
Dielectric strength(KV/mm) |
23 |
|
Volume Resistivity(Ohm.cm) |
There are many silicone rubber manufacturersin china, but we are one of the best choices for you.
Send product request
Other supplier products
 |
Thermally Conductive Silicone Rubber | GA-96*0 series thermal conductivity silicone rubberhave good thermal conductive property, excellent heat transfer performance. Silicone rubber t... |
 |
High-Transparent Fumed Silicone Rubber | High-Transparent Fumed Silicone Rubber GA-33*1 series transparent siliconerubbers have high strength, high transparency, etc. properties; products... |
 |
High Tear Strength Silicone Rubber for Molding (Precipitated/Fumed) | High Tear Strength SiliconeRubber for Molding (Precipitated/Fumed) GA-71*0 series high strength silicone rubberhave high elongation, high tear str... |
 |
Liquid Silicone Rubber | Liquid Silicone Rubber Applications General LSR: Discover general-purpose injection molding materials designed for a wide range of consumer-grad... |
 |
Low Hardness Silicone Rubber | Low hardness series products have good softness, certain self-bonding, etc. properties; this product has not been tested and is not specifically... |
Same products
 |
Thermoset Molding | Seller: WIT MOLD LIMITED | Thermoset Molding Key Aspects of Thermoset Molding Materials: Thermosetting Polymers:These inc... |
 |
UNSCREWING MOLDS | Seller: WIT MOLD LIMITED | UNSCREWING MOLDS Unscrewing moldis a type of mold used in injection molding, primarily for produ... |
 |
dsa anode | Seller: mmo ribbon anode | dsa anode DSA Anode , also known as dimensionally stable anodes, are titanium or niobium su... |
 |
mmo electrode | Seller: mmo ribbon anode | mmo electrode MMO Electrode is the process of using electricity to break down water into hy... |
 |
anode for printed circuit board | Seller: mmo ribbon anode | anode for printed circuit board Acid electrolytic copper plating is an important step in t... |
