Finished shoes sole bending tester
Finished shoes sole bending testeris used to test shoe stiffness/rigidity by flex shoe to certain angle by certain force.
The shoe bending stiffness test is a necessary test before outsole flexing test as per ISO 20344. Footwear which requires force (30±0.5)N to flex lower than 45° from horizontal is not suitable to test onoutsole flexing tester.
Standards
ISO-20344. ISO 17707-2005. GB/T20991-2007. QB 2885-2007. AS/NZS 2210.2 section 8.4.1
Principle
This shoe rigidity is a shoe flexing tester. Clamp the shoe forepart on the machine and apply a force of (30±0.5)N and flex the sample at a speed of (100±10)mm/min until the force has been exerted. Then to measure the angle at this point.
Specification
| Model | UI-FT25 |
| Capacity | 200N |
| Speed | 100mm/min |
| Flex Plate | 315mm |
| Bending Position | 1/3 of finished shoe |
| Sample Size | French standard: Size 39. 42 ; British standard : Size 6. 8 |
| Angle Resolution | 0.1° |
| Test Required Force | 30N |
| Power | 1∮AC 220V 50/60HZ |
| Standard | ISO-20344, ISO 17707-2005. GB/T20991-2007. QB 2885-2007. AS/NZS 2210.2 section 8.4.1 |
Send product request
Other supplier products
 |
Wet Microbial Penetration Tester | The wet microbial penetration tester is mainly used to evaluate the barrier ability of medical protective equipment (such as surgical gowns, isolat... |
 |
Leather Low-Temperature Flexing Tester，import Leather Freezing Flexing Tester | The Leather Low-Temperature Flexing Tester is a high-precision durability assessment system specifically engineered to evaluate the flexing enduran... |
 |
Mask Visual Field Tester丨Mask Visual Field Test machine | Application: Mask Visual Field Tester to determine whether field of vision under the mask meets the standard requirement or not. Standards: EN 1... |
 |
Thermal cycle wet freezing testing machine | The Thermal Cycle Wet Freezing Testing Machine is designed for comprehensive environmental testing, capable of simulating extreme temperature and h... |
 |
Intervertebral Fusion Cages Torsion Fatigue Tester | Standard YY/T 0959-2014 (China): Specifies torsional fatigue testing protocols for intervertebral fusion devices, including load ratios, frequency... |
Same products
 |
TPU Compound Fabric/TPU Compound Film | Seller: Shanghai MSD International Trade Co., Ltd | Polyurethanes used as insulator effectively improve the energy efficiency of buildings, transport... |
 |
Shirley Moisture Permeability Tester | Seller: Standard International Group (HK) Limited | Introduction Shirley moisture permeability tester is used to detect water vapor permeability o... |
 |
Digital Pneumatic Stiffness Tester/Stiffness Tester Pneumatic | Seller: Standard International Group (HK) Limited | A plunger of 25.4 mm (1 in) diameter pushes the fabric through a 38 mm (1.5 in) diameter orific... |
 |
Bundesmann Rain Tester | Seller: Standard International Group (HK) Limited | Introduction The device is a practical test method for rainfall, applicable to clothing prod... |
 |
Spray Rating Tester | Seller: Standard International Group (HK) Limited | Standards: ISO 4920. BS EN 24920. BS 3702. GB/T 4745. AATCC 22. M&S P23. NEXT 23 Applicatio... |
