Blower Heater Purge Type
BHP Series – BLOWER HEATER PURGE TYPERegeneration is evaporation by heatingMoisture is evaporated from absorbents in saturation by hot air that was heated by electric heater absorbing after the suction of outer air by blower.Minimization of exhaust amount of regeneration airLittle purge air loss is generated because of regeneration by ambient air PURGE AIR LOSS~4%.There is regenerated air consumptionExhaust of regenerated air in approx,Website:, 4% even if it is Regenerated using outer air.Outlet Dew Point -100°CGuaranteeing absolute pressure dew point from -40°C-100°C according to the site requirement condition.
Other supplier products
|
|
Graphite Tube Heat Exchangers |
Graphite tube Heat ExchangersLanxing graphite tube heat exchangers are ideal for use with corrosive materials. Made from graphite tubes that are ce... |
|
|
Shell And Tube Type Heat Exchanger |
Product Description：Heat exchanger, also called heat transfer machine or cooler, is the equipment that can transfer certain heat from the thermal f... |
|
|
Filter |
Filter-Pre FilterIt filters out moisture, particles and substances from after cooler and/ or separator to prevent contamination of desiccant.-After... |
|
|
Refrigeration Water Chiller Type |
Dew point drop using freezing cycleRCI type declines the temperature of compressed air by exchanging heat between chiller that was exchanged in hea... |
|
|
Pressure Swing Heaterless Type |
Regeneration is the difference of moisture amountPSH type uses the difference of moisture amount between compressed air and adsorbents.Fixed outlet... |
All supplier products
Same products
