Brass Solder

brass brazing alloyStandardOwn StandardCuZnRestMelting Temperature RangeApplied Base Metal/BCu54Zn53.0～55.0balance/885～888Copper,Website:, Bronze, Steel/BCu60ZnSn(Si)59.0～61.0balanceSn：0.8～1.2Si:0.15～0.35880～909Copper, Bronze, SteelCu470(ISO)BCu59Zn(Sn)57.0～61.0balanceSn:0.2～0.5875～895Copper, Bronze, SteelCu680(ISO)BCu58ZnSn(Ni)(Mn)(Si)56.0～60.0balanceSn:0.8～1.1Si:0.1～0.2Mn:0.2～0.5Ni:0.2～0.8870～890Copper, Bronze, SteelCu471(ISO)BCu58Zn(Sn)(Si)(Mn)56.0～60.0balanceSn：0.2～0.5Si：0.15～0.20Mn：0.05～0.25870～900Copper, Bronze, SteelRBCuZn-BCu681(ISO)RBCuZn-B56.0～60.0balanceSn:0.8～1.1Si:0.04～0.15Mn:0.01～0.5Ni:0.2～0.8Fe:0.25～1.2866~888Copper, Bronze, SteelBrass brazing alloy is applied to flame brazing, high frequency brazing, resistance brazing, and is used for brazing of copper, copper alloys, steel, cast iron and hard alloys. The dirt such as grease, oxide on the surface of brazing metals should be well cleaned before brazing.  The fluxes such as FB101, FB102, FB103, FB105, gas flux and paste flux are recommended to be used. Preform Dimension Form Wire Dia LengthID (inner diameter) Width Thickness Rod 0.5---5.03---1000Ring 0.5---3.05---120Wire0.5—2.0Foil1.5--1200.15--2Strip1.5--1200.15--2If you require special dimension, please call or directly.

Other supplier products

	High Silver Brazing Alloy	High Silver brazing alloy StandardOwn StandardAgCuZnSnInNiMelting Temperature/℃Applied Base MetalBAg20CuZn（20B-B）19～2143～45balance//    /690~810bra...
	Phoscopper Brazing Alloy	Copper phoscopper brazing alloy StandardOwn StandardCuZnRestMelting Temperature RangeApplied Base MetalBCuP1(JIS)BCu95PBalance4.8～5.3/710～925Copper...
	Flux Coating Silver Brazing Alloy	Flux coating silver brazing alloy The silver brazing alloy can be made into flux coating brazing alloy. Flux coating silver brazing alloy is applic...
	Low-silver Copper Phosphorus Brazing Alloy	low-silver copper phosphorus brazing alloyStandardOwn StandardCupAg RestMelting Temperature RangeApplied Base MetalCuP279(ISO)BCu92PAgBalance5.9～6....
	Silicon Bronze Brazing Alloy	silicone bronze brazing alloyStandardOwn StandardCuZnRestMelting Temperature RangeApplied Base MetalCu521(ISO)BCu97SiMnbalance1.5～2.0Mn:0.5～1.5Sn:0...

All supplier products

Same products

	Aluminum Perforated Ceiling Panel	Seller: FOSHAN KEENHAI METAL PRODUCTS CO., LIMITED	Aluminum Perforated Ceiling Panel
	slewing bearing	Seller: Henan Zengkun Machinery Equipment Co.,ltd.	Precision Four Point Contact Ball Slewing Bearing With External Gear SDQ-816 Precision Four Poin...
	Busbar For EV/HEV Automobile Capacitor	Seller: Xiamen Galaxy Precision Technology Co., Ltd	The electrical bus bar is available in rectangular, cross-sectional, round and many other shapes....
	Flexible Bearing For Harmonic Reducer	Seller: Henan Zengkun Machinery Equipment Co.,ltd.	Flexible Bearing For Harmonic Reducer Harmonic Reducer Bearing Transfer Motion And Power By Me...
	Robot Reducer Bearing For RV E And RV C Type Reducer	Seller: Henan Zengkun Machinery Equipment Co.,ltd.	At Present, There Are Two Kinds Of Reducers Used In The Field Of Robots, One Is RV Reducer, The O...