Food process Freeze Dryer drying process

Food process Freeze Dryer drying process
process is divided into two phases, one is the freezing phase, and the other is the vacuum phase (also called the drying or sublimation phase). Many people think that the lower the vacuum in the freezing temperature and the drying stage, the better, in the process of using the lyophilizer, but it is not.
The characteristics of each material are different, so the respective crystallization points are different. The freezing temperature and the water-trapping temperature of the freeze-drying machine are mainly determined according to the characteristics of the material itself, not the lower the better, the lower the temperature. Waste energy consumption, and secondly the time in the food process Freeze Dryer.
The drying stage can be further divided into pre-drying, primary drying and secondary drying. The application of each stage and the degree of dryness that can be achieved are mainly determined by the drying process.
Food process Freeze Dryer pre-drying refers to the first stage of drying to remove free moisture;
Food process Freeze Dryer refers to the drying stage in which free moisture is mainly removed. One drying can only be carried out in a vacuum;
Food process Freeze Dryer refers to the drying stage from the start of freeze-drying to the complete removal of moisture contained in the solid state of polymerization.
If you have the needs of freeze dryers, freeze dryers, etc., you need to know the quotation, Please go to to find the or : info@ Bjsyhx.com.cn Contact us, we will contact you in the first time.
Other supplier products
|
|
LGJ-12 T type (24pcs of ampules) |
Technical parameters:
ampule q'ty:24pcs
cold trap temperature:≤-56℃,optional ≤-80℃
cold trap depth:240mm
cold trap dia.:Ф215mm
ice c... |
|
|
LGJ-12S Top Press Type Experimental Freeze Dryer |
This is widely used in medicine, pharmacy, biology research, chemical industry and food production ,etc. After the freeze drying process,a long te... |
|
|
LGJ-18S Top Press Type Experimental Freeze Dryer |
LGJ-18S Top Press Type Experimental Freeze DryerTechnical parameters:
freeze drying area:0.09㎡
tray dia.:Ф200mm
tray numbers:3
tray sp... |
|
|
The most critical compressor selection method for freeze dryers |
The most critical compressor selection method for freeze dryers
The reason why thecan be used is very considerable. In fact, the main reason is al... |
|
|
DWJ-3XD Low Temperature Cold Trap |
Suitable for scientific research, biology, physics, medicine, chemical industry and other departments for low temperature test . The stainless st... |
All supplier products
Same products