pall-High Flow PP Water Filter Cartridge-HFU640GF100H13W
High-flow water filter cartridge
Long service life, high dirt-holding capacity, all polypropylene material
User can be customized according to the actual working conditions.
RO security filtration Power plant condensate
Biopharmaceutical industry Petrochemical industry
Product Description
Replacement Pallhigh-flow cartridgesare made of deep fine polypropylene or glass fiber membrane as filter media, with a large diameter of 6 inches / 152mm, no center rod, unidirectional opening, and specially designed to flow the liquid from the inside to the outside, ensuring that all contaminant particles are trapped inside the cartridge. The ultra-high flow rate design allows for a significant reduction in the use of cartridges and filters for the same flow rate application, resulting in significant savings in equipment investment costs and labor costs.
Applications: RO pre-filtration, seawater desalination pretreatment; power plant condensate filtration; biopharmaceutical industry API, solvent, water filtration, etc.
Filtration media :Water suspended matter, particulate matter, water dirt, bacteria and algae, rust, etc.
Product Features
1、The combination of surface filtration and deep filtration can significantly reduce the number of cartridges and significantly reduce the size of the supporting filter shell compared with ordinary cartridges.
2、The filter layer is made of high-efficiency and low-resistance material, which can achieve more than 99% of ultra-high filtration efficiency and prolong the service life of the filter cartridge.
3、The design of convenient handle significantly reduces the time of cartridge replacement and makes cartridge replacement simple and portable.
4、The overall polypropylene design and hot melt welding treatment effectively prevent the end cap from falling off and secondary pollution.
5、The design of sealed interface reduces the risk of bypass flow and ensures the sealing and reliability of filtration.
6、The folded design increases the filtering area and makes the pressure drop significantly lower than that of ordinary cartridge.
Replacement PALL high flow water cartridge
L series high flow water cartridge product selection instructions
|
Series Standards |
Cartridge length specification |
Structure form |
Filtration accuracy |
Seals |
|
L-Series |
20--20” |
N--Inner and outer skeleton |
005--0.5μm |
S--Silicone Rubber |
|
40--40” |
W--Outer skeleton |
010--1μm |
E--EPDM rubber |
|
|
60--60” |
R--External winding tape |
030--3μm |
V--Viton |
|
|
050--5μm |
B--Nitrile rubber |
|||
|
100--10μm |
||||
|
200--20μm |
||||
|
400--40μm |
||||
|
700--70μm |
||||
|
1000--100μm |
Specification of replacementPallhigh-flow water filter,
|
Filter Media |
Polypropylene(PP), Glass Fiber |
|
Length |
20"(508mm), 40"(1016mm), 60"(1524mm) |
|
Outside Diameter |
6 inch (152mm) |
|
Inside Diameter |
|
|
Filtration Rating |
1μm, 2μm, 3μm, 5μm, 10μm, 20μm, 40μm, 70μm, 100μm |
|
Support/Drainage |
Polypropylene (PP) Or without |
|
End Cap Material |
Glass fiber reinforced Polypropylene (PP) |
|
Outside |
Rigid Hard Cage, Belt,Stainless Steel(special) |
|
Seal Material |
EPDM, Buna-N, Viton |
|
Maximum Operating Temperature |
Pleated glass fiber:121°CPleated PP: 82°CMelt Blown PP: 65°C |
|
Maximum Differential Pressure |
Pleated glass fiber:3.4 Bar at 121°CPleated PP: 3.4Bar at 82°CMelt Blown:1.03Bar at 65°C |
|
Recommended Change out Differential Pressure |
|
Replacement Pall Model |
|
|
HFU620UY400H13W |
HFU640GF100H13 |
|
HFU620UY200H4W |
HFU640GF200H13 |
|
HFU620UY200HW |
HFU640GF100H13W |
|
HFU620CAS010JUW |
HFU660UY020J |
|
HFU620GF100H13 |
HFU640UY045J |
|
HFU620UY020H13 |
HFU640UY100J |
|
HFU620UY200J |
HFU640UY200J |
|
HFU620UY400J |
HFU660UY400H13 |
|
HFU620UY700J |
HFU660UY200H4 |
|
HFU620UY020J |
HFU660CAS010JUW |
|
HFU640UY020J |
HFU660GF050H13 |
|
HFU640UY045J |
HFU660GF100H13 |
|
HFU640UY100J |
HFU660UY060H1 |
|
HFU640UY200J |
HFU660UY1000H4W |
|
HFU640UY400H13 |
HFU660UY200H4W |
|
XLDM30-20U-HFJ |
|
|
XLDM70-20U-HFJ |
XLDM10-40U-HFJ |
|
PFTM1-20U-HFH13 |
PFTM1-20U-HFH13U |
|
PFTM1-40U-HFH13 |
PFTM1-40U-HFH13U |
|
PFTM1-60U-HFH13 |
PFTM1-60U-HFH13U |
|
PFTM3-40U-HFHU |
PFTM3-40U-HFJ |
|
PFTM70-40U-HFHU |
PFTM70-60U-HFHU |
|
PFTM90-40U-HFHU |
PFTM90-60U-HFHU |
|
PFTM150-40U-HFHU |
PFTM150-60U-HFHU |
Send product request
Other supplier products
 |
pall-Folded high flow water filter element-HFU620UY200H4W | High-flow water filter cartridge Long service life, high dirt-holding capacity, all polypropylene material User can be customized according to th... |
 |
parker-parker filter-MFNP100-40N | Description Parker high-flow cartridges are made of deep fine polypropylene or glass fiber membrane as filter media, with a large diameter of 6 in... |
 |
parker-parker filter-RSCP045-20EPP | Description Parker high-flow cartridges are made of deep fine polypropylene or glass fiber membrane as filter media, with a large diameter of 6 in... |
 |
parker-parker filter-RMG010-20EPP | Description Parker high-flow cartridges are made of deep fine polypropylene or glass fiber membrane as filter media, with a large diameter of 6 in... |
 |
pall-high flow pleated Filter Cartridge-HFU640UY200J | High-flow water filter cartridge Long service life, high dirt-holding capacity, all polypropylene material User can be customized according to th... |
