YTN-01 High Efficiency Sludge Stripping Agent,Pug Stripping Agent, Adhestive Mud Remover, Slime Remover
YTN-01 High Efficiency Sludge Stripping AgentⅠ. Characteristics and Application：YTN - 01 High efficiency sludge stripping agent is made up of efficient cationic surfactant compounded, strong penetrating agent and dispersant, broad-spectrum, efficient sterilization alga ability and strong sludge stripping function and the function of cleaning; It has good dispersibility and permeability, strong penetrating power, low toxicity, action quick, the bacterium and algae by sludge, secretion and bacterium and algae exfoliation of sludge has a good decomposition. At the same time also has the softening and cleaning on the surface of the metal scale, the corrosion and improve equipment heat exchange rate; For metal, rubber, plastic and other non-corrosive, soluble in water is not affected by the hardness of water. So it is widely used in industry of circulating water system for loam stripping and cleaning; Circulating water system in algae fungicidal, detergent and paper preservative, etc.Ⅱ. Physical index：ItemIndexAppearanceColorless transparent liquidPH (1%)6.0～8.0Density ( 25℃) g/cm30.97±0.02Active component content %18Ⅲ. Usage：1. Calculated the retaining water before adding the YTN-01, general dosing quantity is 100-200 ppm, the algae is large, for quick kill and stripping effect, can be appropriately increase the dose.2. Adding the YTN–01, circulating water dirt because of stripping, should be cleared of debris, lest appear secondary sedimentation.3. The YTN–01 used for algae fungicidal, general dosing quantity is 50~100 mg/L.4. Don’t mix the YTN – 01 with anionic surfactants such as PAA and HPMA, also cann’t be used together with chlorine phenol reagent.Ⅳ. Package and Storage：1. Plastic barrel packaging, 25 kg/barrel.2. Room temperature storage, storage period is ten months.
Other supplier products
All supplier products
Same products
