Latex Remover
Application: Use for Tank cleaning of Cargo tank, Tank Container and Storage Tank. Also use in workshop as a stripper to clean the lates from floor. Dose: 1. Butter worth the tank after discharge without any delay for 2 hours with warm fresh water and inject from the beginning on the RXSOL LATEX REMOVER. Make the solution of Rxsol Latex Remover 4-10% with water for tank cleaning procedures. Allow product to soak for 20 minutes and flash down with fresh water. Same for circulation method where time for circulation could be between 1-3 hours. An additional circulation could be necessary when deposits of Latex are quite heavy . Spray RXSOL LATEX REMOVER at ambient temperature and allow approximately 20 minutes activation time. The latex can then be removed with cold water by means of high pressure.
Other supplier products
|
|
Waterless hand cleaner |
It is a milky white creamy gel containing natural ingredients, moisturizers, surfactants, and powerful dispersing agents. This is a batter substitu... |
|
|
ORG - 8 Cleaning Chemical |
RXSOL-20-2061ORG - 8 Cleaning Chemical Cleaner for zinc and epoxy based tank coatings. ORG -8 will clean and upgrade coated cargo tanks after cargo... |
|
|
Antifreeze Liquid |
Item Code: RXSOLAntifreeze Liquid compound for cooling water systems , it is a very effective blend of glycol classified chemicals along with corro... |
|
|
BioSol Cleaner |
RXSOL -20-2019 Very effective cleaner for sticky Oily and Greasy mess, Fully active cleaner specially formulated for the removal of tuff oily stain... |
|
|
RXSOL 666 |
Rx sol 666 is surfactant base highly concentrate Product specially designed to clean Tank Container , Cargo Tank which are carrying Heavy Aromatic ... |
All supplier products
Same products
