.

Air Box Pulse bag type industrial dust collector

Structure and working principle:

Air box pulse bag filter dust collector is composed of shell (usually 5mm carbon steel plate welded), bracket and pulse cleaning system, ash bucket, ash discharge device and other components. When the dust-laden gas enters the PPC air box pulse bag filter from the air inlet, it first hits the inclined baffle in the middle of the air inlet and the air flow turns into the ash hopper. At the same time, the air speed becomes slower, and the coarse particles in the gas are caused by the inertia. Dust directly falls into the ash hopper and plays the role of pre-collecting dust. After entering the ash hopper, the airflow is folded upward and passes through the dust bag inside the metal dust-removing frame. The dust is trapped on the outer surface of the filter bag, and the purified gas enters. The clean room in the upper part of the baghouse is collected and discharged to the outlet pipe. The discharged clean air completely meets the national requirements for emission standards, with a filtration efficiency of 99.99%. The CPPC airbag pulse bag filter is currently the dust removal equipment with the highest dust removal efficiency in the country.

Air box pulse bag filter dust collector products include a total of 33 kinds of specifications, each bag has 32,64,96,128 bags of four, dust bag length of 2450mm and 3060mm two, dust collection efficiency of up to 99.9%, after purification The concentration of dust in the gas is less than 100mg/m3 (standard). If this series of dust collectors is used in cold areas, a heating device shall be provided when the outdoor heating calculation temperature is ≤ -25°C.

Air box pulse bag filter dust collector is generally operated under negative pressure, but it can also work under positive pressure, and the structure does not need to be changed.

Air box pulse bag filter dust collector on the filter bag stoppage and injection time, the interval between the compartments, cleaning cycle by the program control instrument to control, the time is adjustable.

Features:

collector adopts chambers to clean the dust in turn, which is called off-line cleaning. When a room is blown and cleaned, the filtered air stream is cut off, which prevents the dust from flying and dusting to fly twice. Therefore, the PPC airbag pulse bag dust collector can trap gas with a dust concentration of up to 1000g/m3. This series of products can be widely used in the crushing installation of cement plants, storage roofs, cooked cooling machines, and mill dust collection systems.

If you need, please feel free to contactMiss. Livia

Email: />Whatsapp (
livia1332642195
/>Company: Xinxiang Lifeierte Filter Corp., LTD
Web in English:



Send product request

To: 116904
Your E-mail:
Message text:


Send to other suppliers

Other supplier products

Industrial pulse bag house dust collector
Industrial pulse bag house dust collector 1)Industrial pulse bag house dust collector is mainly used for mines, cement plants, coal-fired boiler plant, brick kiln factory, carpentry furnitu...
10T Waste Tyre Recycling Pyrolysis Plant
10T Waste Tyre Recycling Pyrolysis Plant Working principle:First, the raw materials are put into the reactor, and then seal the feeding in door, later start the machine and the reactor wil...
best quality waste tire pyrolysis plant
best quality waste tire pyrolysis plant Working principle:First, the raw materials are put into the reactor, and then seal the feeding in door, later start the machine and the reactor wil...
Waste Tire to Fuel Oil Pyrolysis Plant with ISO
Waste Tire to Fuel Oil Pyrolysis Plant with ISO Working principle:First, the raw materials are put into the reactor, and then seal the feeding in door, later start the machine and the reactor wil...
tyre pyrolysis plant
tyre pyrolysis plant Working principle:First, the raw materials are put into the reactor, and then seal the feeding in door, later start the machine and the reactor wil...
All supplier products

Same products

Factory producer manufacturers ITACONIC ACID 99.6% MIN lubricant oil paper coating pharmaceuticals
Factory producer manufacturers ITACONIC ACID 99.6% MIN lubricant oil paper coating pharmaceuticals Seller: SHANDONG CROWNCHEM INDUSTRIES CO., LTD. Properties:Itaconic Acid (also called Methylene Succinic Acid) is a white crystalline carboxylic ...
Manufacturer supply textiles leather fur CAS NO 107-13-1 Methacrylamide 99% MIN for industrial
Manufacturer supply textiles leather fur CAS NO 107-13-1 Methacrylamide 99% MIN for industrial Seller: SHANDONG CROWNCHEM INDUSTRIES CO., LTD. CAS NO.:107-13-1 Molecular formula:C3H3N Methacrylamide is used as a raw material in the producti...
Methyl Methacrylate(MMA)
Methyl Methacrylate(MMA) Seller: SHANDONG CROWNCHEM INDUSTRIES CO., LTD. 【Application】 Methyl methacrylate is polymethylmethacrylate (PMMA) monomer. It is also copolymer...
Diethylene glycol glycol ether CAS DETB 99%)C9H20O3
Diethylene glycol glycol ether CAS DETB 99%)C9H20O3 Seller: SHANDONG CROWNCHEM INDUSTRIES CO., LTD. DETB is an excellent solvent with low toxicity. Because it has two groups with strong solubility ...
Well sell Acrylamide98%
Well sell Acrylamide98% Seller: SHANDONG CROWNCHEM INDUSTRIES CO., LTD. CAS NO.:79-06-1 Molecular formula:C3H5NO Application: Mainly used to produce a variety of copolym...