.

Two-Part, 1 To 1 Mix Ratio Transparent Silicone Gel - 324C-AB

SPECIAL FEATURES OF GOLOHO-324C-AB

1:1

Two-part, 1:1 mix ratio

Low viscosity

Room temperature accelerated cure, no small molecule release

Suitable working time at room temperature

Excellent adhesion and self-healing

Excellent stability at 200℃ high temperature

GOLOHO-324C is a two-part, addition curing silicone gel

APPLICATIONS OF GOLOHO-324C-AB

Suitable for sealing and protecting various high purity electronic devices

Especially protection of sophisticated and mixed circuit

CAUTIONS OF GOLOHO-324C-AB

To ensure all the protected surfaces be clean and dry

The two components should be thoroughly mixed at a 1:1 ratio by weight or volume, a vacuum encapsulation for 5~10min is recommended(10~20mm Hg)

Working time is defined as the time required for viscosity to double after mixing followed by recommended ratio in 2h at room temperature

To eliminate any air introduced during dispensing or trapped, a vacuum encapsulation is recommended, especially for complex shape circuit

SPECIAL NOTES OF TRANSPARENT SILICONE GEL GOLOHO-324C-AB

Don't contact with the following materials specially in the process of using, otherwise it will cure incompletely or even not cure.

Organotin

Organic silicone with tin

Sulfides

Amide, polyurethane, amide, azido components



Send product request

To: GOLOHO POLYMER (CHANGZHOU) CO. LTD
Your E-mail:
Message text:


Send to other suppliers

Other supplier products

Heat Resistant Silicone Adhesive/Sealant - 3912R
Heat Resistant Silicone Adhesive/Sealant - 3912R heat resistant silicone glue/Sealant - 3912R FEATURES OF GOLOHO-3912R ·UL certificated product(E254532)·One-part RTV silicone rubber&...
Two-Part, 1 To 1 Mix Ratio Transparent Silicone Gel - 324C-AB
Two-Part, 1 To 1 Mix Ratio Transparent Silicone Gel - 324C-AB Two-Part, 1 To 1 Mix Ratio Transparenttwo part silicone gel- 324C-AB SPECIAL FEATURESOF GOLOHO-324C-AB 1:1Two-part, 1:1 mix ratioLow viscosityRoom ...
Addition Silicone Rubber
Addition Silicone Rubber GOLOHO heat cured silicone rubberproduces no by-products in the curing process, allowing their use in deep section and complete confinement. GOLOHO...
Light Cure Conformal Coating - L226
Light Cure Conformal Coating - L226 Led seal spray- L226 FEATURES OF GOLOHO-L226 UV rapid cure one-component, 100% solid content low viscosity emperature resistance: -55~120℃ Descri...
RTV-1 Silicone Rubber
RTV-1 Silicone Rubber RTV-1 silicone is a condensed silicone rubber that is gradually cured from outside to inside by contacting with moisture in the air. RTV-1 silicone...
All supplier products

Same products

LUBE MT1-4 400ML Grease with Excellent Water Resistance
LUBE MT1-4 400ML Grease with Excellent Water Resistance Seller: Guangdong Juguangheng Automation Equipment Co.,Ltd. LubeUSA LuberMT1-4is an excellent low temperaturegreasewith excellent water resistance and rust p...
MOLYKOT PD 910 Lubricants 1KG Plastic Rubber Noise Reduction
MOLYKOT PD 910 Lubricants 1KG Plastic Rubber Noise Reduction Seller: Guangdong Juguangheng Automation Equipment Co.,Ltd. DupontMolykote PD-910Lubricant is a 1-Part Solvent, Dispersed in fluorinated solvent, Liquid used...
KLUBER Microlube GL 261 400g Special Lubricating Greases on a Mineral Oil Base
KLUBER Microlube GL 261 400g Special Lubricating Greases on a Mineral Oil Base Seller: Guangdong Juguangheng Automation Equipment Co.,Ltd. MICROLUBE GL 261, GL 262 greases are particularly suitable for low to medium-speed plain and roll...
MOBIL GREASE XHP 222 16KG Industrial Grease
MOBIL GREASE XHP 222 16KG Industrial Grease Seller: Guangdong Juguangheng Automation Equipment Co.,Ltd. Mobilgrease XHP 222is an extended service lithium complex grease intended for a wide variety of a...
Castrol Molub-Allloy Paste TA 1KG High temperature Lubricants
Castrol Molub-Allloy Paste TA 1KG High temperature Lubricants Seller: Guangdong Juguangheng Automation Equipment Co.,Ltd. MOLUB-ALLOY™PASTE TAensures a good separating and sealing effect in high temperature and we...