Nonionic Flocculants
SINOFLOC nonionic flocculantistechnically pure polyacrylamides. Nonionic polyacrylamide exhibits neutral nonionic properties in the aqueous solution which is hardly influenced by the PH value in the application. As one of flocculant suppliers, flocculant manufacturers, SINOFLOC nonionic flocculants are suitable for use as a settlement aid in many different mineral-processing applications and are particularly effective under very low PH conditions, as encountered in acidic leach operations.
Nonionic Polyacrylamide (PAM) Specifications
|
Products |
Product Code |
Charge |
Molecular Weight |
|
Nonionic PAM Powder |
SINOFLOC 9010 |
<5 |
High |
|
Nonionic PAM Powder |
SINOFLOC 9010H |
<5 |
Very High |
Products Feeding:
The solutions of SINOFLOC nonionic polymers must be prepared in suitable plants equipped with dry powders feeding and dispersion units and with continuous and moderate agitation. The dissolution water must have a temperature included between 10°C and 40°C; For a correct use of SINOFLOC nonionic polyelectrolyte and in order to achieve the best possible results, it is necessary to allow a “maturation” time of 60 minutes. When treating turbid water, the flocculants solution must be added to the water in a point of average turbulence, in order to achieve a thorough and homogeneous mixing without impairing the flock formation. Recommend operating concentration is 3g/l, and the maximum operating concentration is 15g/l. For an optimum performance on specific applications on nonionic flocculant, please consult with SINOFLOC team.
FAQ
What is the Charge of Sinofloc Nonionic Polyacrylamide?
Sinofloc is supplying dry powder flocculants with charge under 5%.
What is the Main Characteristics of Sinofloc Nonionic Polymer?
What Kinds of Nonionic Polyacrylamide are Available in Sinofloc?
What’s the Main Application for Nonionic Flocculants?
What's the Nonionic Polyelectrolyte Flocculation Principle?
What is the Nonionic Polyacrylamide Characteristic?
What is Application Status of Nonionic Polymer in Paper Making?
Could Nonionic Polyacrylamide Be Used in Construction Field?
Could Nonionic Polyacrylamide Be Used in Dyeing Wastewater Treatment?
Could Nonionic Polyacrylamide Be Used in Industrial Wastewater Treatment?
Could Nonionic Polyacrylamide Be Used in Agriculture?
Why is Polyacrylamide Used as Flocculants?
How to Storage Polyacrylamide Well?
How is Sinofloc Service Team?
Shipping
Instructions
Preparation Products Solution
Powder polyacrylamide flocculants couldn’t be directly feed to the sewage. It is necessary to dissolve it in water first and then use its water solution to treat the sewage. The water to dissolve the granular polymer should be clean (such as tap water), rather than sewage. The water at the normal temperature is workable, no need to be heated. When the water temperature is less than 5oC, the dissolution is very slow. The speed of dissolution will be increased along with water temperature get higher, but if it is more than 40oC, the degradation of the polymer will be accelerated.
Nonionic Flocculants for Mineral Processing
Sinofloc nonionic flocculants with high or very high molecular weight could be used in sedimentation or centrifugation, with good performance and cost efficiency.
If you want to know more types of oilfield chemicals, please contact us.
Send product request
Other supplier products
 |
Superabsorbent | Applications of Super Absorbent Polymers in Agriculture Superabsorbent SINOFLOC superabsorbent polymers (known as SAP) are water-insoluble poly... |
 |
Friction Reducer | SINOFLOC is offering a broad range of leading-class to our customers from fresh water to heavy brines. Our product range includes anionic polyacryl... |
 |
Enhanced Oil Recovery (EOR) | SINOFLOC manufactures a complete range of anionic polyacrylamide for . Our chemicals for Polymer Flooding, long chain polyacrylamide molecules mixe... |
 |
Red Mud Settling Flocculants | Red Mud Settling Flocculants SINOFLOC red mud settling flocculantsis used for settling aluminum red mud slurries in alumina plants, which provide ... |
 |
Polydadmac | Polydadmac SINOFLOCpolyDADMAC is liquid, cationic coagulants with different solid contents and viscosities and suitable a wide range of PH. Our po... |
Same products
 |
Hot Melt Adhesive for Vacuum Insulation Panels | Seller: Foshan Rurga New Material Technology Co. ,Ltd | Hot Melt Adhesive for Vacuum Insulation Panels Supply & Technical Support Capabilities ... |
 |
Hot Melt Adhesive for Packaging | Seller: Foshan Rurga New Material Technology Co. ,Ltd | Hot Melt Adhesive for Packaging Bond Strength & Durability: Hot melt adhesives provide i... |
 |
Hot Melt Adhesive for Hygiene Products | Seller: Foshan Rurga New Material Technology Co. ,Ltd | Hot Melt Adhesive for Hygiene Products refers to thermoplastic pressure‑sensitive adhesives ... |
 |
LSAW Steel Pipe & Tube | Seller: HEBEI TIRICO PIPELINE CO.,LTD | LSAW Steel Pipe & Tube , or Longitudinal Submerged Arc-Welding Pipe (also known as SAWL ... |
 |
Anti-Corrosion Steel Pipe & Tube | Seller: HEBEI TIRICO PIPELINE CO.,LTD | Anti-Corrosion Steel Pipe & Tube Anti-Corrosion Steel Pipe & Tube What Is an Anti... |
