High-Purity Krypton
Product Details
Product Names
High-Purity Krypton
Pure Krypton
Krypton
Purity
High-Purity Krypton: ≥99.999%
Pure Krypton: ≥99.995%
Impurity Content (ppm)
| Impurity | High-Purity Krypton | Pure Krypton |
|---|---|---|
| Nitrogen (N₂) | ≤2 | ≤8 |
| Oxygen (O₂) + Argon (Ar) | ≤1.5 | ≤5 |
| Hydrogen (H₂) | ≤0.5 | ≤1 |
| Carbon Monoxide (CO) | ≤0.3 | ≤0.4 |
| Carbon Dioxide (CO₂) | ≤0.4 | ≤0.8 |
| Hydrocarbons (CH₄) | ≤0.3 | ≤0.8 |
| Water (H₂O) | ≤2 | ≤3 |
| Xenon (Xe) | ≤2 | ≤20 |
| Fluoride Content (CxFy) | ≤1 | ≤10 |
Packaging
Filled in 40L steel cylinders, and also available in smaller cylinders of 8-10L upon customer request.
Applications
Recommended for industrial use, used in incandescent light bulbs, fluorescent lamps, counters, laser light sources, ultraviolet light sources, standard gases, special mixed gases, etc.
Physical and Chemical Properties
CAS Number: 7439-90-9.
Physical and Chemical Characteristics: Colorless and odorless inert gas. Insoluble in water and ethanol. Melting point (℃): -156.6; Boiling point (℃): -151.7; Relative density (water=1): No data; Relative density (air=1): 2.92; Saturation vapor pressure (kPa): No data; Flash point (℃): Not applicable; Combustion heat (kJ/mol): Not applicable; Critical temperature (℃): No data; Critical pressure (MPa): No data; Upper and Lower Explosion Limits (v%): Not applicable; Ignition temperature (℃): Not applicable.
Combustion and Explosion Hazards: Non-flammable. Under high heat, the pressure inside the container may increase, posing a risk of rupture and explosion.
Firefighting Methods: Non-flammable. Remove containers from the fire area if possible. Spray water to keep the containers cool until the fire is out. Evacuate people to the upwind side and isolate the contaminated area. Emergency personnel should wear self-contained positive pressure breathing apparatus and general work clothes. Cut off the leak source if possible. Ensure adequate ventilation to disperse the gas. Handle the leaking container properly, repair and inspect before reuse.
Health Hazards: Inert gas, high concentrations can reduce oxygen partial pressure and pose a risk of asphyxiation. Symptoms include increased breathing rate, lack of concentration, ataxia, followed by fatigue, restlessness, nausea, vomiting, coma, convulsions, and potentially death.
First Aid Measures: Inhalation: Quickly move to a fresh air area. Keep the airway clear. If breathing is difficult, administer oxygen. If breathing stops, perform artificial respiration immediately. If breathing and heartbeat stop, perform artificial respiration and external chest compressions immediately.
Send product request
Other supplier products
 |
Architectural aluminum powder coating MT-D35 | Product Description MT-D35 is a series of durable powder coatings specially formulated TGIC- free for the use on architectural aluminum which conf... |
 |
Building Materials Super Weather Resistant Powder | Powder characteristics With excellent weather resistance, it not only has the characteristics of environmental protection and super weather resist... |
 |
High-Purity Xenon | Product Details Product Names Ultra-High Purity Xenon High-Purity Xenon Xenon Purity Ultra-High Purity Xenon: ≥99.9995% High-Purity Xenon... |
 |
Thermal Transfer Powder Coating | Product Description: Thermal transfer powder coating is a transparent thermosetting powder coating primarily composed of saturated carboxyl polyes... |
|
|
Light pole powder | Introduction Accurate selection of powder has always been a problem for the powder industry. To solve this problem, we name the powder according t... |
