High-Purity Methane
Product Details
Product Names
High-Purity Methane
Pure Methane
Methane (CH₄)
Purity
High-Purity Methane: ≥99.999%
Pure Methane: ≥99.99%
Impurity Content (ppm)
| Impurity | High-Purity Methane | Pure Methane |
|---|---|---|
| Ethane (C₂H₆) | ≤5.0 | ≤25 |
| Oxygen (O₂) | ≤2.0 | ≤10 |
| Nitrogen (N₂) | ≤2.0 | ≤35 |
| Hydrogen (H₂) | ≤1.0 | ≤10 |
| Water (H₂O) | ≤1.0 | ≤15 |
Packaging
Filled in 40L steel cylinders, and also available in smaller cylinders of 8-10L upon customer request.
Applications
Primarily used as fuel, such as natural gas and coal gas, widely used in civilian and industrial applications. As a chemical raw material, it can be used to produce acetylene, hydrogen, synthetic ammonia, carbon black, chloroform, carbon disulfide, methyl chloride, methylene chloride, chloroform, carbon tetrachloride, and hydrogen cyanide, etc.
Safety Information
CAS Number: 74-82-8.
Physical and Chemical Properties: Colorless and odorless gas, soluble in alcohol and ether. Melting point (℃): -182.5; Boiling point (℃): -161.5; Relative density (water=1): 0.42 (-164℃); Relative vapor density (air=1): 0.55; Saturation vapor pressure (kPa): 53.32 (-168.8℃); Critical temperature (℃): -82.6; Combustion heat (kJ/mol): 889.5; Critical pressure (MPa): 4.59; Flash point (℃): -188; Ignition temperature (℃): 538; Upper explosion limit (v%): 15; Lower explosion limit (v%): 5.3.
Combustion and Explosion Hazards: Flammable, forms explosive mixtures with air, poses a risk of combustion and explosion when exposed to heat sources and open flames. Reacts violently with bromine pentoxide, chlorine, hypochlorous acid, nitrogen trifluoride, liquid oxygen, difluorine oxide, and other strong oxidants.
Firefighting Methods: Cut off the gas supply. If the gas supply cannot be cut off, do not extinguish the fire at the leak site. Spray water to cool the container, and if possible, remove the container from the fire area to an open space. Fire extinguishing agents: water spray, foam, carbon dioxide, dry powder.
Health Hazards: Methane is essentially non-toxic to humans, but at high concentrations, it significantly reduces the oxygen content in the air, causing asphyxiation. When the concentration of methane in the air reaches 25% to 30%, it can cause headaches, dizziness, fatigue, lack of concentration, accelerated breathing and heartbeat, and ataxia. Failure to leave the area promptly can lead to asphyxiation and death. Skin contact with liquefied methane can cause frostbite.
First Aid Measures: Skin contact: Seek medical treatment if frostbite occurs. Inhalation: Quickly move to a fresh air area. Keep the airway clear. If breathing is difficult, administer oxygen. If breathing stops, perform artificial respiration immediately. Seek medical attention.
Send product request
Other supplier products
 |
Gray wrinkle color powder coating | COLORS AVAILABLE RAL colors coating powder Pantone colors Color-matching regarding customer requirement is available PHYSICAL PROPERTIES Speci... |
|
|
General polyester coatings | Introduction ProductsPorducts DescriptionProduct StandardsWarranty General polyester coatings Outdoor used polyester resin and TGIC curing... |
|
|
Soft Coral Gold powder coating | Product Features With a special skin feel formula, the surface of the coating after powder solidification has a touch similar to that of the skin,... |
|
|
Storage rack powder coating | Characteristics of powder coatings “It does not contain toxic, solvent free, or volatile toxic substances, so it does not have toxic,”... |
 |
Environmentally Friendly Powder Coating | Our eco-friendly powder coatings are perfect for a wide range of applications, including appliances, furniture, automotive parts, industrial machin... |
