Polysilazane Resin STD-8812
Introduction
STD 8812 is a vinyl-containing polysilazane resin that serves as a ceramic precursor. It cures under heating, exhibits excellent adhesion to metals, polymers, and glass, and can withstand temperatures up to 600℃ after curing. Through ceramic conversion processes, it achieves high-temperature resistance of 1500-1800℃.
Features & Applications
Features:
Low viscosity
High-temperature and oxidation resistance
Applications:
Ceramic precursors
High-temperature adhesives
Instructions
Curing process: 200℃/1-2h or 300℃/30min
This material is highly moisture-sensitive. Prolonged exposure causes degradation. After opening, purge with N₂/Ar and store at low temperature to extend shelf life.
Technical Specifications
|
Property |
Value |
|---|---|
|
Appearance |
Colorless or pale yellow liquid |
|
Viscosity @25℃ |
50-200 cPs |
|
Solid Content |
>99% |
|
Density |
0.95-1.15 g/cm³ |
Packaging
1Kg, 5Kg
Storage & Shelf Life
Store in a cool, dry, and clean environment
Unopened: 12 months (5-25℃)
PPE Requirements
|
Category |
Requirement |
|---|---|
|
Gloves |
Chemical-resistant impermeable gloves |
|
Respiratory |
Not required |
|
Eye Protection |
Splash-proof goggles |
|
Body Protection |
Full-body protective clothing with safety boots. Equip eyewash stations and emergency showers |
First Aid
Skin Contact
Rinse with soap/water for 5 minutes
Eye Contact
Flush with flowing water for 20 minutes
Seek medical attention
Inhalation
Move to fresh air
Consult physician if symptoms occur
Send product request
Other supplier products
 |
Negative pressure tester for medical syringes | Negative pressure tester for medical syringes - Other test instrument - standard Standards: YY0053-2008, GB 15810-2019 single-use sterile syrin... |
 |
UV Viewing Cabinet | Scope of application: Coatings and paints: Used to test phosphors in various substances such as plastics, paints and coatings Aluminum foil: Used... |
 |
Safety shoe impact testing machine | According to the criteria: Bs-953,1870,EN-344,ANSI-Z41,CSA-Z195 ISO K88782 Technical parameters: Weight of drop hammer: （EN） 20±0.2kg,（... |
 |
Strength Tester for Lead - end of Photovoltaic Modules | Standard IEC 61215-2:2016: Terrestrial Photovoltaic (PV) Modules – Test Requirements for Electrical and Mechanical Components CE Certificat... |
 |
Protective clothing water vapor permeable tester ASTM E90-00 ASTM E96 | Standards: ASTM E90-00 ASTM E96 JIS L1099A BS 7209 JIS L1099B Applications: Used for moisture permeability test of various fabrics, film materia... |
Same products
 |
Easy-cleaning Silicone-Modified Waterborne UV Resin | Seller: Guangzhou Human New Material Science and Technology Co., Ltd | LUV533 is a high-performance, silicone-modified hexafunctional waterborne UV resinengineered to d... |
 |
Water-based Soft-Touch Resin for Consumer Electronics | Seller: Guangzhou Human New Material Science and Technology Co., Ltd | Water-based Soft-Touch Resinis an advanced coating material formulated to deliver a luxurious, ve... |
 |
Conformal Coatings | Seller: Guangzhou Human New Material Science and Technology Co., Ltd | The conformal coatingsprovide good adhesion to metal, PCB and other substrates after curing at ro... |
 |
Metalized & Laser Transfer coating | Seller: Guangzhou Human New Material Science and Technology Co., Ltd | Metallized and laser transfer coatingsare designed with sustainability in mind, ensuring minimal ... |
 |
Hydrophilic coatings for Air Conditioner | Seller: Guangzhou Human New Material Science and Technology Co., Ltd | A water-based coating combination applied on the surface of aluminum foil, which forms a layer wi... |
