Silicone Oil ALFARES-60000
Product description
ALFARES 60000 is a silicone fluid based on straight-chained polydimethylsiloxane fluids.
Applications
Thermostatic fluids (–50 °C to 200 °C).
Dielectric fluids (impregnation of paper for condensers).
Anti-blotting products for photocopying machines.
Thinning and plastifying agents for RTVs and silicone sealants.
Lubricating and heat-protecting agents for textile threads (synthetic sewing threads).
Ingredients in maintenance products (polishes, wax polishes, floor and furniture polishes, etc.).
Paint additives (anti-cratering, anti-floating/flooding and anti-scratching effects, etc.).
Water-repellent treatment:
– of powders (for paints and plastics)
– of fibres: glass fibres
Release agents (mould release for plastics and metal castings).
Surfactants for styrene-butadiene foam.
Typical Properties
Very good resistance to high and low temperatures.
Good combustion resistance.
Good dielectric properties.
Low surface tension.
High compressibility.
Absence of ageing upon exposure to atmospheric agents.
Good oxidation resistance.
Little change in viscosity with temperature.
Good resistance to high and prolonged shear stress.
Storage and handing
When stored in the original unopened packaging at a temperature between –20 °C and 50 °C, products may be stored for up to 2 years from its date of manufacture (expiry date).
Comply with storage instructions and expiry date marked on the packaging, and observe all recommendations made by the Material Safety Data Sheet (MSDS) at all times.
Product safety
The Safety Data Sheet (SDS) should always be read and completely understood prior to handling any chemical product.
It is important that adequate safety procedures are followed by the user.
Send product request
Other supplier products
 |
Surface Finish Powder Coatings for Performance & Aesthetics | Surface That Performs & Impresses In today’s industrial design, appearance matters as much as performance. Our Powder Coatings by Surfac... |
 |
Guardrail powder/powder coating material | Brief description Made with saturated polyester resin and curing agent such as TGIC or HAA as the main base material. Features Excellent mechani... |
 |
560℃ High Gloss Mirror Chrome and Metallic Bonding Powder Coating | Feature — The metallic pigment can be better melt with the bottom powder and will not jam the spray gun while spraying. — Strong adhe... |
 |
Red Wrinkle Color Powder Coating | Introduction Texture Wrinkle Type Epoxy resin series Main Material Epoxy resin,curing agent,filler,piment,adhesive Advanta... |
 |
Functional Material Powder Coatings | 1. Targeted Solutions for Industrial Challenges Functional powder coatings address industry-specific needs where traditional coatings fall short, ... |
