.

Gray wrinkle color powder coating

COLORS AVAILABLE

RAL colors coating powder

Pantone colors

Color-matching regarding customer requirement is available

PHYSICAL PROPERTIES

Specific gravity :1.2 ~1.8g/cm3 up to colors

Particle size distribution:100% less than 100 microns (depending on the specific indicators art effects may be, according to the special requirements of painting adjusted)

Level of liquidity:24 ~27 mm

CURING CONDITIONS

180 °C ~200 °C (work piece temperature), 10-15 minutes

AVERAGE COVERAGE

8-12 square meters /kg, thickness 60 microns (100% of the powder coating utilization rate)

PACKING

Outside carton lined with two layers of polyethylene bags, each containing 20 kg net weight.

STORAGE AND TRANSPORT

Stored in less than 30 °C, ventilated, dry, clean room, not near the fire source, heating, avoid direct sunlight, the product in the transport should be to prevent rain, sun, prolonged sun exposure.Storage products in line with the above conditions, since the date of production, effective storage period is 6months.Over the storage period may be re-tested and the results were consistent with, can still be used.

HEALTH AND SAFETY

Coating powder is anon-toxic products, but should be avoided in the course of inhalation of dust.Proposed operators wear appropriate dust mask, glasses.If possible, try to avoid long-term skin contact with powder coating

Mechanical property

Testing items

Standards and methods

Inspecting index

Impact strength

GB/T1732-1993. AS3715 2.8

>50kg/cm

Bending resistance

GB/T1185-88. AS1580 402.1. ISO9227

Pass 2-5 millimeters

Adhesion CHECKED TEST

GB/T9286-88.2mm Cross cut, ISO2409

Pass100/100. passes 0levels

Cupdrawing:Erichsen, ISO1520

Erichsen, ISO1520

Pass 3-7 millimeters

Chemical resistance and weather resistance

Salt spray test

GB/T1771-91.500 hours

The cross section of corrosion less than 2MM

Hot and damp resistance test

GB/T,1000 hours

Without air bubbles, loses the light slightly

Acid resistance

10% CH3COOH, 240 hours

Without air bubbles, the surface without damage

Alkali resistance

10% NaOH, 240 hours

Without air bubbles, the surface without damage

Heat resistance

200degree,1 hour

The color change is lower than E=1.5

Solvent resistance

MEK24 hours soaked in solvent-free

Without air bubbles, the surface without damage

Uvioresistant

QUV-313.500 hours

Gloss higher than 80% lower than the

Munsell color change level

Water tolerance of

2 hours

No bubble, not falling, losing light


Send product request

To: Standard International Group (HK) Limited
Your E-mail:
Message text:


Send to other suppliers

Other supplier products

Furniture Powder Coating
Furniture Powder Coating Introduction We are a leading Chinese powder coating factory with over 20 years of export experience, supplying high-quality coatings to furniture...
High durability powder coatings MT-800 AM
High durability powder coatings MT-800 AM Product Description MT-800 AM is a series of high durability powder coatings designed for exterior exposure. Tested against the most severe specif...
Polyester Clear Powder Coatings
Polyester Clear Powder Coatings This series of product are made of polyester resin (as hardener) and highly transparentmaterials. There are two types of products are suitable for ...
Metallic plane MT-629/93601
Metallic plane MT-629/93601 Introduction No. MT-629/93601 Color Gray Surface Metallic plane System Resin imported from Austria Packing Speci...
Automotive parts powder coatings MT-A300 Series
Automotive parts powder coatings MT-A300 Series Product Overview: Weather-resistant pure polyester powder coatings designed for automotive wipers, luggage racks, bumpers and other parts. Charac...
All supplier products

Same products

Hot Melt Adhesive for Vacuum Insulation Panels
Hot Melt Adhesive for Vacuum Insulation Panels Seller: Foshan Rurga New Material Technology Co. ,Ltd Hot Melt Adhesive for Vacuum Insulation Panels Supply & Technical Support Capabilities ...
Hot Melt Adhesive for Packaging
Hot Melt Adhesive for Packaging Seller: Foshan Rurga New Material Technology Co. ,Ltd Hot Melt Adhesive for Packaging Bond Strength & Durability: Hot melt adhesives provide i...
Hot Melt Adhesive for Hygiene Products
Hot Melt Adhesive for Hygiene Products Seller: Foshan Rurga New Material Technology Co. ,Ltd Hot Melt Adhesive for Hygiene Products refers to thermoplastic pressure‑sensitive adhesives ...
LSAW Steel Pipe & Tube
LSAW Steel Pipe & Tube Seller: HEBEI TIRICO PIPELINE CO.,LTD LSAW Steel Pipe & Tube , or Longitudinal Submerged Arc-Welding Pipe (also known as SAWL ...
Anti-Corrosion Steel Pipe & Tube
Anti-Corrosion Steel Pipe & Tube Seller: HEBEI TIRICO PIPELINE CO.,LTD Anti-Corrosion Steel Pipe & Tube Anti-Corrosion Steel Pipe & Tube What Is an Anti...