Water-dispersible isocyanate curing agent STD 268
Introduction
Product Description
STD268 is a water dispersible polyisocyanate based on hexamethylene diisocyanate (HDI). In combination with waterborne polyurethane, polyacrylate, etc., it can be used for water-borne coatings and adhesive. After addition of STD268, the ready-to-use mixture must be used within the pot life.
STD 268 can be diluted with the solvents, such as propylene glycol methyl ether acetate (PMA), propylene glycol diacetate (PGDA), butyl acetate, etc. Only PU grade
solvents (< 0.05% water) should be used and the solvents must be tested in advance by the user to determine suitability.
Properties
1.High gloss and high building up.
2.Excellent weather resistance.
Characteristic Data
(Typical values – not specifications)
|
Property |
Value |
Unit |
Test Method |
| Appearance | Colorless to yellowish transparent liquid | — | Visual |
| NCO content | 20.5 ± 0.5 | % | GB/T 12009.4-2016 |
| Viscosity | 5000 – 7000 | mPa·s | Brookfield LV, 63#/3 rpm,25 °C |
| Color (APHA) | < 80 | — | GB/T 1722-1992 |
| Monomeric isocyanate | ≤ 0.1 | % | GB/T 18446-2009 |
| Flash point | ~196 | °C | GB/T 5208 |
| Density | ~1.17 | g/cm³ | GB/T 4472-2011 |
Storage & Handling
The product should be stored in dry conditions above 5°C and below 35°C with the integrity of the packaging, and prevent direct sunlight. The validity of this product is for 12 months, performance assessment is recommended before use after shelf life. The product should be protected from freezing during storage. Water dispersible polyisocyanates are very moisture-sensitive and react with water to form carbon dioxide and insoluble ureas. The generation of carbon dioxide can lead to dangerous increases in pressure. The containers must always be kept tightly closed and the access of water in all forms must be prevented. It is suggested to use up once the package is open.
Send product request
Other supplier products
 |
Iron Oxide Pigment MT-645T | Description Type Brown pigment – High Performance, special with high thermal stability Delivery form Powder Chemical cla... |
 |
10-year outdoor warranty high weather-resistant powder | Mechanical properties Grade 0 Pass 50kg positive and negative impact Chemical resistance Xenon lamp 1000 hours 1000 hours salt spray tes... |
 |
Lighting powder coatings | Characteristics of powder coatings “It does not contain toxic, solvent free, or volatile toxic substances, so it does not have toxic,”... |
 |
Low-Gloss Powder Coatings | Introduction Our low-gloss powder coatings are ideal for a wide range of applications, including furniture, appliances, automotive parts, metal pa... |
 |
Epoxy Anti-Corrosion Powder Coating for Reinforcing Steel | Surface Finish Options Overview Product Introduction: This is a thermosetting epoxy-modified heavy-duty anti-corrosion powder coating specifica... |
Same products
 |
Easy-cleaning Silicone-Modified Waterborne UV Resin | Seller: Guangzhou Human New Material Science and Technology Co., Ltd | LUV533 is a high-performance, silicone-modified hexafunctional waterborne UV resinengineered to d... |
 |
Water-based Soft-Touch Resin for Consumer Electronics | Seller: Guangzhou Human New Material Science and Technology Co., Ltd | Water-based Soft-Touch Resinis an advanced coating material formulated to deliver a luxurious, ve... |
 |
Conformal Coatings | Seller: Guangzhou Human New Material Science and Technology Co., Ltd | The conformal coatingsprovide good adhesion to metal, PCB and other substrates after curing at ro... |
 |
Metalized & Laser Transfer coating | Seller: Guangzhou Human New Material Science and Technology Co., Ltd | Metallized and laser transfer coatingsare designed with sustainability in mind, ensuring minimal ... |
 |
Hydrophilic coatings for Air Conditioner | Seller: Guangzhou Human New Material Science and Technology Co., Ltd | A water-based coating combination applied on the surface of aluminum foil, which forms a layer wi... |
