Transparent powder coating
Product Overview
This series of products is made of polyurethane or acrylic resin with curing agent, and is a transparent powder coating with high transparency and excellent flatness resistance.
Application areas
Main applications:
- Automobile topcoat and exterior parts
- Automobile wheel coating
- Indoor and outdoor metal parts protection
- High-performance finish layer for various metal appliances
Typical application scenarios:
- High-end metal furniture
- High-end hardware products
- Bicycle parts
- High-end door handles
- High-end craft products
- Gloss protection layer for metal powder coatings
Technical parameters
Basic properties of powder:
Specific gravity: 1.1~1.3g/cm³
Volatile matter: <0.5%~2% (depending on product type)
Flow rate: >130 (with good fluidization and conveying performance)
Features
| Category | Features | Curing conditions | |
| PE/TGIC | Polyester/TGIC | Good leveling, excellent weather resistance, good transparency | 200℃/10min |
| Polyester/TGIC | Good leveling, excellent weather resistance, good transparency | 200℃/10min | |
| PU | polyurethane type | Good leveling, excellent weather resistance, good transparency | 200℃/15min |
| Acrylic/PU | Mixed acrylic | Good leveling, excellent weather resistance, excellent weather resistance, solvent resistance | 200℃/10min |
| Acrylic | Acrylic | Excellent weather resistance and solvent resistance, Impact resistance can reach ±10kg.com. 200℃/10min 170℃/20min |
170℃/20min |
Coating performance
| Item | Reference standard | PE/TGIC | PU type | Acrylic/PU | Acrylic |
| Appearance | GB5237.4 | Flat | Flat | Flat | Flat |
| Leveling | Q/TXSLD01-03 | Grade C | Grade B | Grade B | Grade A |
| Transparency | Q/TXSLD01-03 | Grade B | Grade B | Grade B | Grade A |
| Impact | GB/T1732-93 | ±50kg.cm | ±50kg.cm | ±50kg.cm | ±50kg.cm |
| Cupping | GB/T9753-88 | >6mm | >6mm | >6mm | >6mm |
| Adhesion | GB/T9286-98 | Grade 0 | Grade 0 | Grade 0 | Grade 0 |
| Bending | GB6742-86 | Φ2mm | Φ2mm | Φ2mm | Φ2mm |
| Indentation hardness | GB9275 | ≥80 | ≥80 | ≥80 | ≥80 |
| Salt spray test | GB/T1771-91 | No change after 1000 hours | No change after 1000 hours | No change after 1000 hours | No change after 1000 hours |
| Wet heat test | GB/T1740-79 | 1000 hours level 1 | 1000 hours level 1 | 1000 hours level 1 | 1000 hours level 1 |
| Aging test Light aging | Light aging: ASTMG154QUV0.78w/m2@340nm500h | Gloss retention rate ≥80% | Gloss retention rate ≥80% | Gloss retention rate ≥80% | Gloss retention rate ≥80% |
| Note: The above tests all use 0.7mm thick degreased aluminum plates with a film thickness of 60-80μm; the above parameters are laboratory data and are for reference only. The actual indicators are related to factors such as customer environment, equipment, substrate, pretreatment, and spraying process. | |||||
Packing specifications
Standard packaging: carton lined with plastic bag
Net weight per box: 20kg
Transportation classification: non-hazardous goods
Safety instructions
Raw materials do not contain highly toxic substances
Precautions for use:
- Avoid inhalation of dust (it is recommended to wear a dust mask)
- Reduce direct skin contact
- Skin contamination can be washed with soap
- Avoid contact with chemicals during storage
If you're ready to take the next step or Request Free Samples, Leave your message below and we’ll reply soon. 20+ years of chemical manufacturing & export experience, a partner you can trust.
Send product request
Other supplier products
 |
Chrome-silver-effect polyurethane powder coatings MT-200 Cr | Product description MT-200 Cr is a series of polyurethane-based powder coatings designed for the exterior environment offering excellent corrosion... |
 |
Flat high gloss MT-049/78592 | Introduction No. MT-049/78592 Color Light grey Surface Flat high gloss System Polyester/049 Scope of application... |
 |
Dark Green Sand Texture Powder Coating | Key Attributes ItemsInformation CAS No. 53808-41-6 Place of Origin China Main Raw Material EPOXY Usage Furniture Pai... |
 |
Modified Chlorinated Polyether Powder Coating | High-Performance Chlorinated Polyether (CPE) Powder Coatings Direct-from-Factory Manufacturing | Global B2B Solutions We manufacture and supply h... |
 |
Car powder Coating | Brief description Made with saturated polyester resin and curing agent such as TGIC or HAA as the main base material. Features Excellent mechani... |
Same products
 |
High Concentration Plastic Color Masterbatch Factory Direct Supply | Seller: 861445 | We are a professional color masterbatch manufacturer with years of R&D experience in plastic ... |
 |
Acid Ink Blue G Factory | Seller: TIANJIN LEADING IMPORT & EXPORT CO., LTD | Acid Ink Blue G Factory 【Application of Acid Ink Blue G 】 mainly used for making blue or ... |
 |
Acid Black ATT Factory | Seller: TIANJIN LEADING IMPORT & EXPORT CO., LTD | Acid Black ATT Factory 【What’s Acid Black ATT】 is made of acid black 10B and acid o... |
 |
Acid Black 10B Factory | Seller: TIANJIN LEADING IMPORT & EXPORT CO., LTD | Acid Black 10B Factory is mainly suitable for dyeing and printing wool ,silk and nylon fabri... |
 |
Sulphur Dyes | Seller: TIANJIN LEADING IMPORT & EXPORT CO., LTD | Sulphur Dyes BuyDye supplies a range of sulphur dyes for cotton-based textile dyeing, includ... |
