PS 26-1017 PK Pigment Brown
Introduction
C.I. Pigment Yellow 119
Zinc Ferrite Brown Spinel
EINECS # 269-103-8
C.I. #77496
CAS# 68187-51-9
Description
PS 26-1017 PK is a yellowish Zinc Ferrite. Its colour is comparable to iron oxide yellow.
It has excellent chemical resistance, outdoor durability, light fastness, heat stability and is non-bleeding and non-migratory. It is a all-purpose pigment, suggested applications include RPVC, Polyolefins, Engineering Resins.
Application
This pigment causes no warpage in injection-moulded or extruded parts – not even large ones. Its outstanding fastness ratings makes this pigment ideally expedient for plastics resistant to both weathering and heat, notably for shading as well as for mass tone. It make it particularly suitable for Paints and Coatings including General Industrial, Coil and Extrusion coatings. Another field of application are architectural finishes, both water- and solvent-based.
Physical properties
| Test method | ||
| Specific Gravity (g/cm3) | 4.60（±0.1） | DIN-ISO 787 part/Teil 10 |
| Oil Absorption (g/100g) | 20 | DIN-ISO 787 part/Teil 5 |
| Median size (µm) | 0.6 | Cilas Granulometer HR 850-B |
| Specific Surface (m2/g) | 5.7 | |
| pH | 5.5-7.0 | DIN-ISO 787 part/Teil 9 |
| Heat resistance | ＞500℃ | |
| Fastness to Light | ＞7 | DIN 54003 |
| Fastness to Weather | ＞4 | DIN 54001 |
| Sieve residue (325 mesh / 45µm) | ＜0.1% | DIN 53195 |
| Moisture | ＜0.5% | DIN-ISO 787 part/Teil 2 |
Product Specifications
| Mass Tone | Tint 1:3 | |||
| DL* | +/-0.8 | +/-0.8 | ||
| Da* | +/-0.8 | +/-0.8 | ||
| Db* | +/-0.8 | +/-0.8 | ||
| DE* | max. 1.0 | max. 1.0 | ||
| Colour Strength | +/-5.0% | |||
| (In CIE Lab-units, tested according to Ferro test procedure AA 10/53 (soft-PVC) in comparison to standard quality. Illuminant D65, 10°, SCI) | ||||
We confirm that all batches of PS 26-1017 PK shipped will conform to the above Product Specification. Material may beshipped outside this specification only if agreed to by the customer.
Data or recommendations are based on laboratory preparation and/or testing samples; therefore they cannot be expected to fullyduplicate commercial production or field performance. Final approval and acceptance should be based on appropriate production and service tests. Color chips are for reference only. Colors will appear differently in various formulations.
If you're ready to take the next step or Request Free Samples, Leave your message below and we’ll reply soon. 20+ years of chemical manufacturing & export experience, a partner you can trust.
Send product request
Other supplier products
 |
Dicyandiamide CASAMID DMPF | Description CASAMID DMPF is agrade of dicyandiamide,ground to a very fine particle size, for use in epoxy resin-based powder coatings and contains... |
 |
Charm Deep Love Green powder coating | Product Features With a special skin feel formula, the surface of the coating after powder solidification has a touch similar to that of the skin,... |
 |
Wear-resistant Polyamide Powder Coating | Here is the comprehensive re-organized guide for your industrial coating product lines, professionally formatted for international B2B clients. ... |
 |
3-Layer Polyethylene (FPE) Anti-Corrosion Epoxy Powder Coating | Product Introduction:This product is formulated using epoxy resin and phenolic epoxy resin, designed and manufactured according to GB/T 23257-2009.... |
 |
Polyester resin based thermo-setting powder coatings MT-300 AM | Product Description MT-300 AM is a series of polyester resin based thermo-setting powder coatings formulated using TGIC. The pigments used in the ... |
Same products
 |
Easy-cleaning Silicone-Modified Waterborne UV Resin | Seller: Guangzhou Human New Material Science and Technology Co., Ltd | LUV533 is a high-performance, silicone-modified hexafunctional waterborne UV resinengineered to d... |
 |
Water-based Soft-Touch Resin for Consumer Electronics | Seller: Guangzhou Human New Material Science and Technology Co., Ltd | Water-based Soft-Touch Resinis an advanced coating material formulated to deliver a luxurious, ve... |
 |
Conformal Coatings | Seller: Guangzhou Human New Material Science and Technology Co., Ltd | The conformal coatingsprovide good adhesion to metal, PCB and other substrates after curing at ro... |
 |
Metalized & Laser Transfer coating | Seller: Guangzhou Human New Material Science and Technology Co., Ltd | Metallized and laser transfer coatingsare designed with sustainability in mind, ensuring minimal ... |
 |
Hydrophilic coatings for Air Conditioner | Seller: Guangzhou Human New Material Science and Technology Co., Ltd | A water-based coating combination applied on the surface of aluminum foil, which forms a layer wi... |
