Water-dispersible isocyanate curing agent STD 268
Product Description
STD268 is a water dispersible polyisocyanate based on hexamethylene diisocyanate (HDI). In combination with waterborne polyurethane, polyacrylate, etc., it can be used for water-borne coatings and adhesive. After addition of STD268, the ready-to-use mixture must be used within the pot life.
STD 268 can be diluted with the solvents, such as propylene glycol methyl ether acetate (PMA), propylene glycol diacetate (PGDA), butyl acetate, etc. Only PU grade
solvents (< 0.05% water) should be used and the solvents must be tested in advance by the user to determine suitability.
Properties
1.High gloss and high building up.
2.Excellent weather resistance.
Characteristic Data
(Typical values – not specifications)
|
Property |
Value |
Unit |
Test Method |
| Appearance | Colorless to yellowish transparent liquid | — | Visual |
| NCO content | 20.5 ± 0.5 | % | GB/T 12009.4-2016 |
| Viscosity | 5000 – 7000 | mPa·s | Brookfield LV, 63#/3 rpm,25 °C |
| Color (APHA) | < 80 | — | GB/T 1722-1992 |
| Monomeric isocyanate | ≤ 0.1 | % | GB/T 18446-2009 |
| Flash point | ~196 | °C | GB/T 5208 |
| Density | ~1.17 | g/cm³ | GB/T 4472-2011 |
Storage & Handling
The product should be stored in dry conditions above 5°C and below 35°C with the integrity of the packaging, and prevent direct sunlight. The validity of this product is for 12 months, performance assessment is recommended before use after shelf life. The product should be protected from freezing during storage. Water dispersible polyisocyanates are very moisture-sensitive and react with water to form carbon dioxide and insoluble ureas. The generation of carbon dioxide can lead to dangerous increases in pressure. The containers must always be kept tightly closed and the access of water in all forms must be prevented. It is suggested to use up once the package is open.
If you're ready to take the next step or Request Free Samples, Leave your message below and we’ll reply soon. 20+ years of chemical manufacturing & export experience, a partner you can trust.
Send product request
Other supplier products
 |
Anodized Powder Coating | Introduction： It is suitable for anodic oxidation effect for product appearance, as well as environmental protectionrequirements such as Rohs and ... |
 |
Hydroxylated acrylic dispersion STD 2025 | Product Description Hydroxylated acrylic dispersion STD 2025 is a hydroxyfunctional polyacrylic dispersion designed for vehicle,machinery and anti... |
 |
Bonding Metallic Powder Coating | Getaquote whats/app：+86 132 6275 2056 WEB: std-coatings.com Advantage (Compare with normal metallic powder ): 1.The metallic pigment can be bet... |
|
|
Chlorinated Polyether Powder Coatings | Introduction We manufacture and supply high-performance Chlorinated Polyether (CPE) powder coatings directly from China, serving global B2B client... |
 |
Low temperature environmentally friendly pure polyester/PRIMID powder coating | Getaquote whats/app：+86 132 6275 2056 WEB: std-coatings.com Product Description This series of products uses saturated polyester resin and Prim... |
Same products
 |
Epimedium Extract | Seller: Xi'an Yuensun Biological Technology Co., Ltd. | Product Name: Epimedium ExtractLatin Name: Epimedium Sagittatum Maxim.Specification: Icariin 5%, ... |
 |
Pumpkin Powder | Seller: Xi'an Yuensun Biological Technology Co., Ltd. | Product Name: Pumpkin PowderLatin Name: Cucurbita pepo L.Used Part: FruitAppearance: yellow fine ... |
 |
Broccoli Powder | Seller: Xi'an Yuensun Biological Technology Co., Ltd. | Product Name: Broccoli powder Latin Name: Brassica oleracea L.var.italic Planch. Used Part: Who... |
 |
Pomegranate Powder | Seller: Xi'an Yuensun Biological Technology Co., Ltd. | Product Name: Pomegranate PowderLatin Name: Punica granatum linn.Used Part: Fruit juiceAppearance... |
 |
Orange Powder | Seller: Xi'an Yuensun Biological Technology Co., Ltd. | Product Name: Orange PowderLatin Name: Citrus sinensisUsed Part: Fruit juiceAppearance: Light yel... |
