Polyester powder coatings for indoor use MT-300
Product description
MT-300 is a series of polyester resin based thermo-setting powder coatings formulated using TGIC. The pigments used in the MT-300 series restrict the field of application of this powder coatings class to interior uses. MT-300 is designed for interior decoration such as, metal furniture, shop fittings, shelves, light fittings.
Powder properties
| Typical value | |
| Chemical Type | Polyester – TGIC |
| Density | 1.2 – 1.9 g/cm³, depending on colour and effect |
| Recommended film thickness | 60 – 90µm |
| Shelf life | 12 months below 30 ºC |
| Storage Conditions | (open boxes must be resealed) Dry, cool conditions |
| Curing schedule | 12-24 min at 180°C
8-16 min at 200°C 4-10 min at 210°C (at object temperature) |
Pre-treatment
Galvanised steel requires surface preparation by either multi-stage pretreatment using either zinc phosphate or chromate conversion or controlled sweep blasting. Depending on the type of galvanizing, degassing or use of anti-bubbling additives may be required – follow the procedural advice of the pretreatment supplier. Iron phosphate and particularly Zinc phosphating of ferrous metals improves corrosion resistance. Aluminium substrates may require a chromate conversion coating.
Application
Powders can be applied by manual or automatic electrostatic spray equipment. A good protection is linked with the recommended film thickness. Bonded products have better application properties than blended products (more stable) but attention should still be paid to line settings in order to avoid “marble effect”and changes in aspect after recycling. Different substrates (aluminium, steel, galvanized steel…), use of primer, and big changes in film thickness may give a different aspect. Products with different codes should not be mixed even if same colour and gloss. It is recommended that for consistent application and appearance product be fluidized during application. MT-300 powder coatings can be applied by corona electrostatic or tribostatic equipment. However, the aspect obtained by tribo static equipment may vary when compared to electrostatic application and/or our color card.
Test conditions
Actual product performance will depend upon the circumstances under which the product is used. Testing has been determined under laboratory conditions using the following application properties and is for guidance only.
| Pre-treatment | Zinc Phosphate |
| Substrate | Polished steel |
| Curing schedule | 12 min at 200°C (object temperature) |
| Film Thickness | 60 – 70µm |
Mechanical tests
| Typical value | Method/standard | |
| Adhesion | Class 0 | ISO 2409 (2 mm Crosshatch) |
| Erichsen cupping | Pass 5 mm | ISO 1520 |
| Flexibility | Pass 5 mm | ISO 1519 |
| Hardness | Pass – no penetration to substrate | ISO 1518-1 (2000g) |
| Impact resistance | ≥30 kg.cm | ISO 6272-2 (d/r) |
If you're ready to take the next step or Request Free Samples, Leave your message below and we’ll reply soon. 20+ years of chemical manufacturing & export experience, a partner you can trust.
Send product request
Other supplier products
 |
Extreme Protection Edge powder Coating | Introduction Extreme Protection Edge powder coatings deliver exceptional edge corrosion protection in one coat. Specially formulated to cover shar... |
 |
Hammertone Powder Coating | Why Choose Our Hammertone Powder Coating? Many metal product manufacturers face issues such as poor coating adhesion, uneven finishes, and limited... |
 |
Insulating Powder Coating/powder coating with multilingual support | Product Features: High electrical insulation properties, with a large resistance coefficient and low dielectric constant, meeting the requirements... |
 |
Powder coating for New energy | Introduction Insulating powder coatings protect the strong power of new energy vehicles. The new energy vehicle market has developed rapidly in t... |
 |
Powder coating for automobile wheels MT-Al00 | Product Overview: Special powder coating for wheels (rims), a series of epoxy polyester powder coating products specially designed for the charact... |
Same products
 |
5.4,4'-Oxydiphenol CAS 1965-09-9 | Seller: Yufeng International Group Co., Ltd | Product Name: 4,4'-Oxydiphenol Synonyms: 4,4'-Dihydroxydiphenyl ether 4,4'-Oxydiphenol Bis(4-... |
 |
1,1,2,2-Tetrachloroethane CAS 79-34-5 | Seller: Yufeng International Group Co., Ltd | Product Name: 1, 1, 2, 2-Tetrachloroethane Synonyms: 79-34-5 s-Tetrachloroethane Acetylene te... |
 |
3.Chlorotrifluoroethylene (CTFE) CAS 79-38-9 | Seller: Yufeng International Group Co., Ltd | Synonyms: CHLOROTRIFLUOROETHYLENE 79-38-9 CTFE Chlorotrifluoroethene 1-Chloro-1,2,... |
 |
2.1,1,2-Trichloroethane CAS 79-00-5 | Seller: Yufeng International Group Co., Ltd | Product Name: 1, 1，2-Trichloroethane CAS: 79-00-5 Synonyms:79-00-5, Vinyltrichloride, beta-... |
 |
1.1,1,2,2-Tetrachloroethane CAS 79-34-5 | Seller: Yufeng International Group Co., Ltd | Product Description Product Name: 1, 1, 2, 2-Tetrachloroethane Synonyms: 79-34-5 s-Te... |
