Weather-resistant matte powder coating
Product description
This series of products uses saturated polyester resin and acrylic resin as the main base materials to make thermosetting powder coating.
Product characteristics
- The gloss can reach 2-5% (60°), soft and pleasing to the eye;
- Good fluidity, smooth and delicate appearance and feel;
- Suitable for long-term outdoor use;
- Good adhesion and good impact resistance;
- Good baking yellowing resistance;
- Reasonable price and low cost.
Application areas
1. Outdoor lamps;
2. Courtyard leisure facilities;
3. Building materials;
4. Aluminum ceilings and profiles;
5. Other outdoor low-gloss coatings.
Transportation packaging
Carton packaging, lined with two layers of polyvinyl chloride plastic bags, net weight of each box is 20kg. Non-hazardous items can be transported in various ways, but should be kept away from direct sunlight, moisture and heat, and contact with chemicals.
Hygiene and safety
Operators should wear dust masks during use to avoid inhaling dust and minimize long-term contact between skin and powder coating. Paint attached to the skin can be washed with soap.
Powder properties
| Specific gravity | 1.4~1.8g/cm’ (depending on the formula and color) |
| Particle size | Depending on the purpose, the standard type has an average particle size of 35~40 microns, less than 10 microns of powder <10%, more than 100 microns of powder <0.5%. |
| Storage stability | Outdoor matte powder coatings should be stored in a dry, ventilated room below 30°C, and avoid direct sunlight. If stored in an air-conditioned room, the powder must be stored at room temperature or the same (temperature) as the spraying equipment before use to avoid moisture. Under this condition, the powder can be stably stored for 6 months. If it exceeds the period, it must be re-tested. If the result meets the requirements, it can still be used. |
Film properties
| Test items | Inspection standard or method | Inspection index |
| Appearance | Visual inspection | Various board surface effects |
| Impact | GB/T 1732 | ≥50Kg·cm |
| Bending | GB/T 6742 | ≤2mm |
| Cupping | GB/T 9753 | ≥8mm |
| Hardness | GB/T 6739 | ≥H~2H |
| Adhesion | GB/T 9286 | Level 0 |
| Neutral salt spray resistance | GB/T 1771 | 500h; Scribed area: unidirectional rust ≤2.0mm; Unscribed area: no abnormality |
| Moisture and heat resistance | GB/T 1740 | 500h No abnormality |
| Artificial weather aging resistance | GB/T 1865 | 800h; Discoloration ≤2 level; Gloss loss ≤2 level |
| The above coating performance indicators may decrease slightly as the gloss decreases. | ||
| Spraying | This series of products are suitable for the following spraying methods: corona electrostatic spraying; friction electrostatic spraying; electrostatic fluidized bed spraying; fluidized bed hot dip coating. | |
| Coating thickness: Use between 40~150 microns, recommended film thickness is 50~80 microns. | ||
| Curing conditions | 200℃/15 minutes is recommended, and it can also be designed according to user needs:180℃/15min etc. | |
If you're ready to take the next step or Request Free Samples, Leave your message below and we’ll reply soon. 20+ years of chemical manufacturing & export experience, a partner you can trust.
Send product request
Other supplier products
 |
Weather-resistant matte powder coating | Getaquote whats/app：+86 132 6275 2056 WEB: std-coatings.com Introduction Product description This series of products uses saturated polyester resin... |
 |
Flat matte MT-04916022 | Introduction No. MT-049/16022 Color White Surface Flat matte System Polyester Scope of application Lighting acc... |
 |
Low Temp Cure&Environment friendly Polyester Powder Coatings | Getaquote whats/app：+86 132 6275 2056 WEB: std-coatings.com Feature: -Good adhesion and good mechanical properties -Good flowing and glossy -... |
 |
Outdoor quality-warranty weather-resistant wooden transfer powder coating | Introduction Standard transfer water-grain primer uses imported weather-resistant polyurethane PU system, which has the advantages of high levelin... |
 |
Matte Powder Coatings factory | Getaquote whats/app：+86 132 6275 2056 WEB: std-coatings.com Introduction matte powder coatings offer excellent weatherability, UV resistance, c... |
Same products
 |
Heat Sealing Sterilization Pouch | Seller: Hopeway AMD | Heat Sealing Sterilization Pouch is designed for secure medical instrument packaging, supporting ... |
 |
Catalytic Converter Scrap Supplier, Catalytic Converter Scrap for Sale, , Catalytic Converter Scrap, Catalytic Scrap for Sale, Catalytic Scrap Supplier, Scrap Catalytic Supplier | Seller: Trucont LLC | At Trucont LLC, we have ongoing Catalytic converter scrap available for immediate loading and shi... |
 |
Epimedium Extract | Seller: Xi'an Yuensun Biological Technology Co., Ltd. | Product Name: Epimedium ExtractLatin Name: Epimedium Sagittatum Maxim.Specification: Icariin 5%, ... |
 |
Pumpkin Powder | Seller: Xi'an Yuensun Biological Technology Co., Ltd. | Product Name: Pumpkin PowderLatin Name: Cucurbita pepo L.Used Part: FruitAppearance: yellow fine ... |
 |
Broccoli Powder | Seller: Xi'an Yuensun Biological Technology Co., Ltd. | Product Name: Broccoli powder Latin Name: Brassica oleracea L.var.italic Planch. Used Part: Who... |
