Powder coating for aluminum profiles
Product description
This series of products is based on saturated hydroxyl polyester resin and TGIC curing agent as the main base materials, and is a thermosetting powder coating with excellent weather resistance designed for outdoor materials used in construction.
Product characteristics
High weather resistance, strong mechanical properties;
Excellent water boiling resistance, excellent corrosion resistance;
Good polishing, good construction adaptability and high powder coating rate;
Excellent resistance to excessive baking.
Special effects
Various textures, thermal transfer, metal, pearlescent effects and mixed colors, etc.
Application areas
Specially used for spraying of architectural aluminum alloy profiles.
Transportation packaging
Carton packaging, lined with two layers of polyvinyl chloride plastic bags, net weight of each box is 20kg. Non-hazardous items can be transported in various ways, but should be kept away from direct sunlight, moisture and heat, and contact with chemicals.
Hygiene and safety
Operators should wear dust masks during use to avoid inhaling dust and minimize long-term contact between skin and powder coating. Paint attached to the skin can be washed with soap.
Powder properties
| Specific gravity | 1.2~1.8g/cm³ (depending on the formula and color) |
| Particle size | Depending on the purpose, the standard type has an average particle size of 20~45 microns, less than 10 microns powder <8%, greater than 70 microns powder <20% |
| Volatile matter | <1% |
| Softening point | 60~95℃ varies depending on the color and gloss |
| Storage stability | Polyester/TGIC powder coatings should be stored in a dry and ventilated room below 35℃, and avoid direct sunlight. If stored in an air-conditioned room, the powder must be stored at room temperature or the same (temperature) as the spraying equipment before use to avoid moisture. Under this condition, the powder can be stored stably for 12 months. If it exceeds the period, it must be re-tested. If the result meets the requirements, it can still be used. Note: For low-temperature curing types and powders with a gloss of less than 40% (60°), the storage temperature should be below 30℃. |
Coating properties
| Test items | Inspection standard or method | Inspection index |
| Appearance | Visual inspection | Various board surface effects |
| Impact | GB/T 1732 | ≥50Kg*cm |
| Bending | GB/T 6742 | ≤2mm |
| Adhesion | GB/T 9753 | ≥6mm |
| Hardness | GB/T 9286 | Level 0 |
| Moisture and heat resistance | GB/T 6739 | ≥H |
| Boiling water resistance | GB/T 1740 | 500h No abnormality |
| Acetic acid spray resistance | GB/T 6682 | 2h No shedding or wrinkling, extremely dispersed and tiny bubbles are allowed, and slight color changes are allowed |
| Artificial weathering resistance | GB/T 1771 | 1000h No blistering or shedding of the coating, and the unilateral corrosion of the line does not exceed 4mm |
| Solvent resistance (hydrochloric acid) | GB/T 1865 | 1000h Color difference △E≤5; light retention rate ≥50% |
| Spraying | This series of products are suitable for the following spraying methods: corona electrostatic spraying; friction electrostatic spraying; electrostatic fluidized bed spraying; fluidized bed hot dip coating. | |
| Coating thickness: Use between 40~150 microns, recommended film thickness is 50~80 microns. | ||
| Curing conditions | 200℃/15 minutes is recommended, and it can also be designed according to user needs. | |
If you're ready to take the next step or Request Free Samples, Leave your message below and we’ll reply soon. 20+ years of chemical manufacturing & export experience, a partner you can trust.
Send product request
Other supplier products
 |
Radiator Powder Coating | Main Features of Radiator Powder Coating Excellent leveling properties, with high gloss and high color saturation Exceptional adhesion Good dela... |
 |
Automotive Powder Coating- Factory Direct from China | Getaquote whats/app：+86 132 6275 2056 WEB: std-coatings.com We are a leading Chinese powder coating factory with over 20 years of export experience... |
 |
Imitation Anodizing Coating Series | Introduction Key Features & Specifications FeatureSpecification / Benefit Anodizing-Like Matte Finish Replicates thesleek, low-gl... |
 |
Agricultural machinery powder | Getaquote whats/app：+86 132 6275 2056 WEB: std-coatings.com Brief description Made with saturated polyester resin and curing agent such as TGIC or ... |
 |
Gold powder coating | Getaquote whats/app：+86 132 6275 2056 WEB: std-coatings.com MT-3038 Red gold color MT-MY1835 Transparent red flash gold MT-MY1820 Outdoor gold re... |
Same products
 |
Buy Ecstasy online/ Buy molly Online /Buy MDMA | Seller: 871344 | Whatsapp : +40 767 772 668Signal : Townrunner.01 BUY Ecstasy BUY molly BUY MDMA |
 |
SR-9009 (Stenabolic) Powder - SR-9009 Stenabolic Sarms Powder For Sale | Seller: 871344 | Whatsapp : +40 767 772 668 Signal : Townrunner.01 Where To Buy Pure SR-9009 Powder. Buy To... |
 |
Pure ephedrine powder - Bulk ephedrine powder - Where to buy ephedrine powder | Seller: 871344 | Message Whatsapp : +40 767 772 668 contact Signal : Townrunner.01 Pure ephedrine powder Bu... |
 |
BUY BENZODIAZEPINES AND RESEARCH CHEMICALS ONLINE | Seller: 871344 | Whatsapp : +40 767 772 668 Signal : Townrunner.01 NB: All transactions between both parties rem... |
 |
5.4,4'-Oxydiphenol CAS 1965-09-9 | Seller: Yufeng International Group Co., Ltd | Product Name: 4,4'-Oxydiphenol Synonyms: 4,4'-Dihydroxydiphenyl ether 4,4'-Oxydiphenol Bis(4-... |
